TESEQ AMZ 41－符合CISPR 14标准要求的功率吸收钳

TESEQ AMZ 41－符合CISPR 14标准要求的功率吸收钳符合CISPR 16的规定根据CISPR 14 (EN 55014)进行功率骚扰测量频率范围：30～1000 MHz工作电流高达25A坚固式结构设计技术参数：频率范围：30 MHz － 1000 MHz场地衰减：13 dB － 22 dB去耦因子 DF： >21 dB去耦因子 DR： >30 dB***大输入功率： <10 W内部***大直径： 20 mm***大操作电流： 25 A操作模式： 连续RF 接头： BNC, 50 Ω操作温度：+5°C － +40°C外部尺寸 W x D x H： 665 mm x 120 mm x 105 mm重量： 约7 kgThe absorbing clamp AMZ 41A has been designed for measurement of radio interferences emitted from electrical instruments via their connecting leads. The absorbing clamp measurement method (ACMM) is described in Clause 7 of CISPR 16-2-2. The absorbing clamp itself is described in CISPR 16 part 1-3: Radio disturbance and immunity measuring apparatus – Ancillary equipment – Disturbance power. ApplicationDisturbance power measurements of CISPR 13 and CISPR 14Measurement of screening attenuation of coaxial cablesTesting of screening components, e.g. for motor ignition system***easurement of sheath currents in aerial nefits, obtainable from this measuring method Simplified measurement procedure as compared to RF field measurement, so that no anechoic room is required; High reproducibility of test equency range: 30 MHz to 1000 MHz Min. site attenuation: 13 dB to 22 dBClamp factor (CF): -4 dB to +5 dB, see next page  for typical values Decoupling factor DF: >21 dBDecoupling factor DR: >30 dBMaximum input power for use as injection clamp: <10 WIsolated lines under test: Power supply lines and other  connecting lines Max. cable diameter, inner: 20 mm Max. cable diameter with adapter: 10 mmMax. operating current: 25 AOperation mode: continuousRF connector type: BNC, 50 ΩOperating temperature: +5°C to +40°CSize (over all) W x D x H: 665 mm x 120 mm x 105 mmWeight: approx. 7 kgThe interference output is determined by the following formula:P = V + CFP is the disturbance power in dB(pW) V is the measured voltage in dB(μV) CF is the clamp factor in dB(pW/μV)Part number Description 235601 AMZ 41A  Absorbing clamp CISPR 16-1-3 and LE 210 (RF cable, BNC(m)-BNC(m),  5 m, RG223, with one right-angle plug)97-235601 AMZ 41A-TC  Traceable calibration (ISO17025), order only with device AMZ 41A238251 MBT 1  Hand-operated lane for AMZ 41A   Agilent HP 70950A光谱分析仪Agilent HP 70950B光谱分析仪Agilent HP 70951A光谱分析仪Agilent HP 70952B光谱分析仪Zygo 7701C/ELaser Head 6mmAgilent HP 8147光时域反射仪Agilent HP 81521A光探头Agilent HP 81521B光探头Agilent HP 81522A光传感头Agilent HP 81524A光探头 Agilent HP 81525A光探头Agilent HP 8152A光功率计Agilent HP 81531A光功率计传感插件Agilent HP 81532A传感器Agilent HP 81533A光功率计传感插件Agilent HP 81533B光探头接口模块Agilent HP 81534A光回损插件Agilent HP 81536A光功率计传感插件Agilent HP 8153A光波万用表（光功率计）Agilent HP 81552***光源模块Agilent HP 81554***1310/1550nm 激光源? Agilent HP 8155A激光源Agilent HP 81560A光衰减器Agilent HP 81566A光衰减器模块Agilent HP 8156A光衰减器Agilent HP 81578A可变光衰减器模块Agilent HP 8157A光衰减器Agilent HP 8158B光衰减器Agilent HP 81618A接口模块Agilent HP 81619A接口模块Agilent HP 8162