TESEQ IOB 4000 —— EUT 监控器的输入\ 输出装置

TESEQ IOB 4000 —— EUT 监控器的输入\ 输出装置EUT输入\输出端口监视器12 个数字输入4 个模拟输出1 个激光口输入8 个低电平TTL输出RS232 激光通信传输数据带有电源安全模式的电池操作技术参数：电磁敏感度 (1 kHz AM, 80%, 遵照IEC 61000-4-3)频率范围 10 to 1000 MHz: >190 V/m*频率范围 1 to 18 GHz: >200 V/m补充：4 x 1.2V Mignon (AA) 充电电池,         可更换, 延长电池充电器充电条件：LED, 深度放电保护使用时间 (电池充满条件下)： 约1 周/8 H/天，16H/睡眠模式电流损耗 (睡眠模式)： 约 6 mA电流损耗 (操作)：约 26 mA电压开关：硬件开关The Input / Output Box, in short IOB 4000, is an ideal addition for electromagnetic immunity test systems. With its 12 digital inputs, as many signals on one test item can be monitored. In doing so, there are two ***ailable voltage ranges; 0 V … 24 V and TTL level. There are 4 analogue inputs ***ailable which h***e a voltage range of 0 V … 24 V for monitoring analogue voltage values. The monitoring of light sources such as, for example operating indicator lamps, can be realized with the optical input. The IOB 4000 can be integrated in the test house software. The instruction set is provided and own applicati*** can be written. The communication is performed via an optical RS232 interface which enables faultless access to the IOB 4000 in an immunity test setup.All functi*** of the IOB 4000 can be tested with the included software “IO-Test“. The communicati*** port can be selected, the BOX can be woken up, the number of measurements per second can be set, the serial number can be read and the battery status can be seen. All ha***are inputs and outputs of the IOB 4000 are also in the window. The box c***ists of a robust metal case optimized for EMC. This is due to the intended use as interface box for monitoring signals for EMC measurements. The power supply is made using batteries in order to guarantee operation independent of mains power. Electromagnetic susceptibility (tested with 1 kHz AM, 80%, according to IEC 61000-4-3)  Frequency range 10 to 1000 MHz: >190 V/m*  Frequency range 1 to 18 GHz: >200 V/mSupply: 4 x 1.2V Mignon (AA) rechargeable batteries,  exchangeable, extended battery charger Charging conditi***: LED, display within software and deep-discharge  protectionOperating time (fully charged set of batteries): approx. 1 week with 8 h active operating per day  and 16 h sleep mode Current c***umption (sleep mode): approx. 6 mACurrent c***umption (operation): approx. 26 mAPower switch: ha***are switch Communication interface to USO 4013: opt. RS232Connection: 2x HFBR0501 socket for 1 mm fiber optic cableDistance: 10 m (>10 m on request) *) Limited by the power amplifier in the test setup. Analogue input Quantity: 4 Connector: 4x BNC sockets Input range: 0 V ... 24 V Cut-off frequency: fg = 6 kHz Resolution: 10 Bit Input resistance: Rein = 25 k?Digital input Quantity: 4 Connector: 4x BNC sockets Input range: 0 V to 24 V Threshold level: approx. 3 VLatch: Latch to trigger on pos. and neg. edgeDigital input Quantity: 8 Connector: D-SUB socket, 9 pins Input range: TTL level Latch: Latch to trigger on pos. and neg. edge Digit