RCB 200N1 汽车电源故障模拟器

RCB 200N1 汽车电源故障模拟器HighlightsAs per Ford ES-XW7T-1A278-AC, Annex G, Figs. G-1/G-2Pulses CI 220: Pulses A1, A2, B1, B2 and CPulse CI 260: Pulse FStrictly using components as per Ford requirementsFixed repetition times and pseudo-random timingAutomatic control of mode and switch settings by micro-controllerEasy control by manual operationApplicationRCB 200 - Generation of relay switching transientsThis RCB 200 relay switch box has been designed by EM TEST to offer a high-quality solution for customers testing according to ES-XW7T-1A278-AC Ford specification.Three function keys permit to operate the unit, to select the test pulses and test modes.- TEST allows to start and to stop the test- PULSE allows to select the pulse- MODE allows to select the mode for Pulse A1, A2, B1, B2 and CLEDs indicated the selected pulse and mode.标准Ford ES-XW7T-1A278-ACISO 7637-2:2011Benefit***icro-processor controlled RCB 200 ensures easy operationWith its 6 different pulses and two different modes to sequence these test pulses the RCB 200 is easily operated by only three function keys. A micro-controller automatically sets the circuit required to generate the selected pulse in the predifined mode (fixed mode with specified repetition and duty cycle (pulses A1, A2, B1 and B2) or random (pulse C)).The RCB 200 can also be used for tests as per CI 260F.Test modes 2 and 3are based on a pseudo-random timing of the application of pulses. This is done automatically by the built-in microprocessor. All tests can be performed in sequence or endless. The Potter & Brumfield relay must be replaced because of the life and wear after 100 hours of tests. An integrated counter actively monitors the operating time of the relay. The EOL LED (end of life) indicates the current EOL tails for Relay CircuitRCB 200 - strictly designed as per ES-XW7T-1A278-ACTransient Generator Ford ES-XW7T-1A278-AC 放大The circuitry of the RCB 200 is strictly following the requirements as per Ford given in Annex G, Figs. G-1 and G-2 for transient pulses A1, A2, B1, B2 and C, using the components specified by Ford.The two test modes are achieved based on the relay circuit details given in Figs. G-3 and G-4 of Annex G.RCB-200Agilent HP 70950A光谱分析仪Agilent HP 70950B光谱分析仪Agilent HP 70951A光谱分析仪Agilent HP 70952B光谱分析仪Zygo 7701C/ELaser Head 6mmAgilent HP 8147光时域反射仪Agilent HP 81521A光探头Agilent HP 81521B光探头Agilent HP 81522A光传感头Agilent HP 81524A光探头 Agilent HP 81525A光探头Agilent HP 8152A光功率计Agilent HP 81531A光功率计传感插件Agilent HP 81532A传感器Agilent HP 81533A光功率计传感插件Agilent HP 81533B光探头接口模块Agilent HP 81534A光回损插件Agilent HP 81536A光功率计传感插件Agilent HP 8153A光波万用表（光功率计）Agilent HP 81552***光源模块Agilent HP 81554***1310/1550nm 激光源? Agilent HP 8155A激光源Agilent HP 81560A光衰减器Agilent HP 81566A光衰减器模块Agilent HP 8156A光衰减器Agilent HP 81578A可变光衰减器模块Agilent HP 8157A光衰减器Agilent HP 8158B光衰减器Agilent HP 81618A接口模块Agilent HP 81619A接口模块Agilent