具有高色澤、高色彩、高遮蓋力、高穩定性、耐酒精及耐磨擦之特點。 印刷：絲印移印均可。 表幹及實幹時間：表幹時間自然揮***5-10分鐘；實幹時間在24小時以內。 稀釋及清洗：SV3慢幹***油水、UVK1（移印***油水）同時可使用718洗網水清洗。 測試方法（完全幹燥後）： 1、3m膠紙粘在畫有百格的油墨表面，45度角迅速拉起不脫油 2、純度99%的工***酒精，壹千克砝***用棉布包住在油墨表面，以水平力來回拉200次***脫色 3、 耐磨：橡皮擦500g力水平來回擦500次。 使用方法： 1、使用前應充分攪拌，用後隨時封閉； 2、攪拌時加***油水10-15%，稀釋到印刷粘度； 3、網板塞網時可用洗網水清洗； 4、不得與其它類型油墨混合使用。 註意事項： 1、塑膠材料的外觀相似，但可能會是不同的材料，客戶需試印確定其符合要求後，再批量印刷； 2、在移印過程中，如出現拉絲或散***，可適當加入壹些慢幹膏即可 3、環境溫度過高，***會影響油墨原有質量； 4、根據***候***化，請遠離火源，陰暗環境下存放。 Oles MPE Plating Ink MPE plating strengthening series ink characteristics mainly used in plating surface, enhanced surface, vacuum plating surface and other materials, with a high color, high color, high covering power, high stability, high alcohol and rub characteristics. Printing screen printing can be. Surface drying and drying time surface dry time natural volatile 5-10 minutes work time within 24 hours. Dilution and cleaning SV3 slow dry open water, UVK1 ( printing open water) can be simultaneously used 718 washing network water cleaning. Test method ( completely dry ) 1, 3M gummed paper in the paintings of the surface of the ink, 45 degree angle quickly pulled off the oil 2, 99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, with a horizontal force pulling back and forth 200 times without decolorization 3 oak, wear resistance eraser 500g force level brush back and forth 500 times. Usage 1, use should be fully stirred, use at any time after the closure 2, add water mixing 10-15%, diluted to 3, screen printing viscosity the plug is ***ailable when washing network water cleaning 4, not with other types of ink mixing. Note 1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing 2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster 3, the ambient temperature is too high, will af