1.LUXIMA Lux1310图像传感器
LUX1310 图像传感器是一款像素1.3M,帧速1070FPS,全局***的CMOS数字图像传感器芯片,适用于高速机器视觉,条形码扫描,自动化设备,***扫描,动作分析以及其他工业以及生物***等领域。芯片上12b ADC 和 16并行LVDS 输出便于集成并且能够降低系统的噪声系数。
这款图像传感器支持8路感兴趣区同步读出同时具有灵活的窗口选择。使用者能够通过选择X,Y开窗来获取更快的帧速。传感器有单色和彩色两种选择,都是88针LCC陶瓷封装,16.9mm x 16.9mm。
参数简介:
-
Optical format: 2/3”
-
Active resolution:1280 x 1024 pixels
-
Pixel: 6.6um pitch PPD global shutter pixel
-
Full well: 17,000e-
-
Read Noise: 25e-
-
Resp***ivity:9.6V/Lux-s @ 525nm
-
Conversion gain: 73 uV/e-
-
Dynamic Range: 56.7dB
-
High Dynamic Range Mode:Dual-slope and Triple-slope resp***e supported
-
Frame Rate: 1,070 Frames/s @ 1280 x 1024
4,168 Frames/s @ 640 x 512
8,300 Frames/s @ 256 x 256
Up to 1,000,000 Frames/s @ 1280 x 1
Faster frame rates with ***aller X,Y window size
-
Region of Interest:Windowing and up to 8 simultaneous ROI’s are supported
-
Binning:2 x 2
-
Analog to Digital Converter: 12b
-
Analog Gain Opti***:1x – 16x
-
Clock rate:25 MHz - 90 MHz (90MHz typical @ 1,070 Fps)
-
Data Output:16 LVDS ports
Multiplex Mode (8 LVDS, 4 LVDS, 2 LVDS ports)
300Mbps per port @ 25MHz – 1,080Mbps perport @ 90MHz
-
Power supply: 3.3V Analog, 1.8V Analog, 1.8V Digital
-
Power c***umption: 2.0W @ 1,070 FPS Full Resolution
Adjustable with lower frame rates, e.g. 670 mW @ 250 Fps
-
Package Type: 88 Ceramic LCC in a ***all footprint of 16.9mm x 16.9mm
-
Color Filter:Color RGB or Monochrome
2.LUXIMA1310 配套插座-ANDON插座687-88-***-G10-L14-1
ANDON厂家CCD/CMOS插座的优点:
-
插座焊接到电路板上,可提高图像传感器的可靠性和稳定性。
-
便于传感器插入或拔出、及轻松升级。
-
可减少CCD/CMOS在焊接过程中由于触摸产生的静电放电对CCD/CMOS造成的影响。
-
避免焊接过程中产生的瞬间高温对CCD/CMOS彩色阵列的影响。
-
便于CCD/CMOS的清洗和维护。
-
可减少焊接过程中对CCD/CMOS玻璃窗口造成刮痕或印刷电路板起泡的风险。
-
消除装配线的温度,湿度,和振动对CCD/CMOS产生的不良影响。
LCC插座实物图:
LUXIMA1310 配套插座订购型号:687-88-***-G10-L14-1
687-88-***-G10-L14-1尺寸图:
3.LUXIMA LUX1310 评估系统-LUX1310‐EVS
LUX1310‐EVS 能使使用者评估LUX1310图像传感器芯片的性能。
LUX1310‐EVS是由LUX1310-SEP,图像传感器评估平台以及LUX1310‐SHB图像传感器母板三部分组成。
主要特性:
LUX1310-‐SHB
• Ultra-‐***all 38.1mm x 38.1mm sensor head board footprint
• 1280 x 1024 pixels @ 1,070fps 2/3” Global Shutter CMOS Sensor
• On-‐Board drivers for buffering reference voltages to the LUX1310 Sensor
• Two ***all connectors for data output, register programming and voltage references
• Lens Mount support CS-‐mount and C-‐mount lenses with CS to C mount adapter
• 2/3” C-‐mount Lens for the Sensor Head Boar
LUX1310-‐SEP主要特点:
• On-‐oard FPGA to receive16‐channel LVDS data @ 1Gbps/channel
• 2 GB DDR3 memory to store c***ecutive image frames from the LUX1310‐SHB
• On‐oard USB chipset for USB 2.0 Interface to PC
• Sensor Control Software for image capture,playback and senso rcommunication
• USB cable and DC 5V Powe rSupply Included