新款泛光灯 PHB11（Flood Light 35W）
材质及特性：
1.运用保护角设计和镜面涂层技术，达到防眩光效果，能有效减少***睛的刺激，避免产生不适合疲劳感。
2.多重防震结构设计和高强度合金外壳，确保其在路基路轨、桥涵、隧道等高频振动中长期安全工作。
3.特殊的密封盒表面涂层处理，确保灯具在潮湿、高温等恶劣环境中永不腐蚀，***。
4.照射角度可根据环境需要在上下200度大范围调节。
5.可在停作应急照明，特殊的电路设计，即能工作照明，又能在停电时作应急照明，具有双重功能。
Materials and characteristics：
1.use protection angle design and mirror coating technology to achieve anti-reflection optical effect ,it can be effectively reduce the stimulation of the eyes , ***oid discomfort and fatigue.
2.multiple anti-vibration and structure design of high-strength alloy casing to ensure that the track roadbed ,bridges and culverts. Tunnel high-frequency vibration long-term security working.
3.Special sealing and coating treatement to ensure lamps in the humid ,high temperature and other harsh environmental never corrosion,and never rust.
4.lighting Beam angles can be changed under environmental needs in 200 large adjustment range.
使用场所：
广告、大厦外景、体育馆、厂区、码头、车站、铁路、隧道、港口等户外照明。
Application:
Applied to factory premises,and various large platform facilities,stadiums and subways,railways,roads,bridges and other sites for roads,lighting channel.
注意事项：
1.运输时将灯具装在所配备的纸箱内。
2.使用时，灯具表面有一定的温度，属于正常现象，玻璃表面温度较高，手勿触摸，儿童勿接近。
3.更换灯泡时，应使用同类型、功率的灯泡，如果改变灯泡类型或功率，应相应更换镇流器。
4.火线接“L”端，零线接“N”端，地线接到接地端，再将引入装置的压紧螺母旋紧。
5.电源接点220V，备好相应长度的电缆线8mm。
NOTE:
1.Transport lamps will be installed in equipped with cardboard boxes.
2.Use,lamps surface of a certain temperature,is a normal phenomenon,glass surface temperature higher,but do not touch,not close to the children.
3.Replacement of the lamp,it should use the same type of power the lihgt bulbs,if we change the bulb type or power,should replace the corresponding matching ballast.
4.The"+"line is connected to the "L"side,the"-"line is connected"N"line.and the earth line is under grounding ,and then the introduction of devicescompress nut to tighten.
5.220v power supply tap to prepare for the corresponding length of 8mm cable.
型号（Model）:PHB11/35L
光源及灯泡功率（Lamp Watt）：HPS/MH35W
灯头型号（Lamp holder model）:E27
电压及频率（Voltage&Frequency）：220V~230V/50Hz
功率因数（Power factor）：≥0.9
IP：65