DRPBA-303-2 DRPBA-303-C2 DRPBA-303-N2

108
MOUNTED ROLLER BEARINGS
STANDARD CONTACT HI-TEMP DIMENSI*** IN INCHES BASE
SHAFT SEAL SEAL (1) SEAL APPROX. BOLTS
DIAM.
PART PART PART
WT. IN
A B C IN. D E G H J K L NO. SIZE
NO. NO. NO.
LBS.
MIN. MAX
3 15/16 DRPBA-315-4 DRPBA-315-*** DRPBA-315-N4 93.0 5.00 17.50 12.00 15.00 4.67 2.00 2.75 9.38 5.25 2.13 6.00 4 3/4
4 DRPBA-400-4 DRPBA-400-*** DRPBA-400-N4
STANDARD CONTACT HI-TEMP DIMENSI*** IN INCHES BASE
SHAFT SEAL SEAL (1) SEAL APPROX. BOLTS
DIAM.
PART PART PART
WT. IN
IN. A B C D E G H J K L NO. SIZE
NO. NO. NO.
LBS.
MIN. MAX
1 3/4 DRPBA-112-2 DRPBA-112-C2 DRPBA-112-N2
1 15/16 DRPBA-115-2 DRPBA-115-C2 DRPBA-115-N2 17.5 2.88 10.00 6.75 8.50 2.57 — 1.50 5.25 2.95 1.20 3.25 2 5/8
2 DRPBA-200-2 DRPBA-200-C2 DRPBA-200-N2
2 3/16 DRPBA-203-2 DRPBA-203-C2 DRPBA-203-N2 19.7 3.00 11.00 7.75 9.25 2.56 — 1.56 5.62 3.12 1.25 3.62 2 5/8
2 1/4 DRPBA-204-2 DRPBA-204-C2 DRPBA-204-N2
2 7/16 DRPBA-207-2 DRPBA-207-C2 DRPBA-207-N2 25.5 3.25 12.00 8.50 10.38 2.88 — 1.75 6.12 3.31 1.31 3.94 2 5/8
2 1/2 DRPBA-208-2 DRPBA-208-C2 DRPBA-208-N2
2 11/16 DRPBA-211-2 DRPBA-211-C2 DRPBA-211-N2
2 3/4 DRPBA-212-2 DRPBA-212-C2 DRPBA-212-N2 35.2 3.75 13.50 9.32 11.56 3.12 — 2.00 7.00 3.69 1.44 4.75 2 3/4
2 15/16 DRPBA-215-2 DRPBA-215-C2 DRPBA-215-N2
3 DRPBA-300-2 DRPBA-300-C2 DRPBA-300-N2
3 3/16 DRPBA-303-2 DRPBA-303-C2 DRPBA-303-N2
3 7/16 DRPBA-307-2 DRPBA-307-C2 DRPBA-307-N2 67.8 4.50 16.00 10.87 13.27 4.38 — 2.25 8.50 4.19 1.69 5.55 2 7/8
3 1/2 DRPBA-308-2 DRPBA-308-C2 DRPBA-308-N2
DRPB-A Series Pillow Blocks...Two Bolt Base (K INTERCHANGE)
DRPB-A Series Pillow Blocks...Four Bolt Base (K INTERCHANGE)
The DRPB-A units h***e a high base-to shaft centerline and wide base mounting dimensi***, and are interchangeable with competitive “K” types.
Bearing load and speed capabilities are equal to RPB.
The DRPB-A series units are similar in design to DRPB series, but h***e only one cone extension and one locking collar, and are recommended where
axial shaft space is limited.
Two Bolt Base Four Bolt Base
See page 109 for seal arrangements.
(1) High temp units are factory assembled-to-order basis.
For Load Ratings, See Page 121.