Features
¨ Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
¨ Compliant with SFF-8431,SFF-8432 and IEE802.3ae
¨ Up to 10km on 9/125um ***F
¨ Two types：
A:1270nm DFB Laser tran***itter,1330nm receiver
B:1330nm DFB Laser tran***itter,1270nm receiver
¨ Digital Diagnostic SFF-8472 Compliant
¨ Operating case temperature 0 ~ 70 °C
¨ RoHS6 compliant (lead free)
Applicati***
¨ 10GBASE-LR at 10.3125Gbps
¨ Other Optical Links
Product description
The BDTRX837L1SN-10 & BDTRX873L1SN-10 series single mode transceiver is ***all form factor pluggable module for duplex optical data communicati*** such as 10GBASE-LR/LW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability.
The 10G SFP+ module BDTRX873L1SN-10 is designed for single mode fiber and operates at a nominal w***elength of 1270nm; BDTRX837L1SN-10 module is designed for single mode fiber and operates at a nominal w***elength of 1330nm. The tran***itter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.
The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
Absolute Maximum Ratings
These values represent the damage threshold of the module. Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditi***.
|
Parameters |
Symbol |
Min. |
Max. |
Unit |
|
Supply Voltage |
VCC |
-0.5 |
+3.6 |
V |
|
Storage Temperature |
Tc |
-40 |
+85 |
°C |
|
Operating Case Temperature |
Tc |
0 |
+70 |
°C |
|
Relative Humidity |
RH |
0 |
85 |
% |
Recommended Operating Conditi***
|
Parameter |
Symbol |
Min. |
Typical |
Max |
Unit |
|
Supply Voltage |
VCC |
3.0 |
3.3 |
3.6 |
V |
|
Supply current |
Icc |
|
200 |
300 |
mA |
|
Operating Case Temperature |
TC |
0 |
25 |
70 |
°C |
|
Module Power Dissipation |
Pm |
- |
0.7 |
1.1 |
W |
Notes:
1. Supply current is shared between VCCTX and VCCRX.
2. In-rush is defined as current level above steady state current requirements.
Optical characteristics (BDTRX873L1SN-10, 1270 DFB & PIN/TIA)
|
Parameter |
Symbol |
Min. |
Typical |
Max |
Unit |
Ref. |
|
Tran***itter |
||||||
|
Optical W***elength |
λC |
1260 |
1270 |
1280 |
nm |
|
|
Side Mode Suppress Ratio |
***SR |
30 |
|
|
dB |
|
|
Spectral Width(-20dB) |
Δλ |
|
|
1 |
nm |
|
|
***erage Output Power |
Pop |
-8.2 |
|
0.5 |
dBm |
1 |
|
Extinction Ratio |
ER |
3.5 |
|
|
dB |
|
|
Eye Mask |
|
Compliant with IEEE 802.3 |
||||
|
Tran***itter and Dispersion Penalty |
TDP |
|
|
3.2 |
dB |
|
|
***erage Power of OFF Tran***itter |
|
|
|
-30 |
dBm |
|
|
Relative Intensity Noise |
RIN |
|
|
-128 |
dB/Hz |
|
|
Receiver |
||||||
|
***erage Receiver Power |
RSENS |
|
|
-14.1 |
dBm |
1,2 |
|
Receiver Overload |
PMAX |
|
|
+0.5 |
dBm |
|
|
Centre W***elength |
λC |
1320 |
|
1340 |
nm |
|
|
LOS De-Assert |
LOSD |
|
|
-15 |
dBm |
|
|
LOS Assert |
LOSA |
-30 |
|
|
dBm |
|
|
LOS Hysteresis |
|
0.5 |
|
|
dB |
|
Notes:
1. ***erage Receiver Power (Min) is informative and not the principal indicator of signal strength. A received power below this value cannot be compliant.
2. Measured with a PRBS231-1 test pattern @10.3125Gbps, BER≦10-12
Optical characteristics (BDTRX837L1SN-10, 1330 DFB & PIN/TIA)
|
Parameter |
Symbol |
Min. |
Typical |
Max |
Unit |
Ref. |
|
Tran***itter |
||||||
|
Optical W***elength |
λC |
1320 |
1330 |
1340 |
nm |
|
|
Side Mode Suppress Ratio |
***SR |
30 |
|
|
dB |
|
|
Spectral Width(-20dB) |
Δλ |
|
|
1 |
nm |
|
|
***erage Output Power |
Pop |
-8.2 |
|
0.5 |
dBm |
1,2 |
|
Extinction Ratio |
ER |
3.5 |
|
|
dB |
|
|
Eye Mask |
|
Compliant with IEEE 802.3 |
||||
|
Tran***itter and Dispersion Penalty |
TDP |
|
|
3.2 |
dB |
|
|
***erage Power of OFF Tran***itter |
|
|
|
-30 |
dBm |
|
|
Relative Intensity Noise |
RIN |
|
|
-128 |
dB/Hz |
|
|
Receiver |
||||||
|
***erage Receiver Power |
RSENS |
|
|
-14.1 |
dBm |
2,3 |
|
Receiver Overload |
PMAX |
|
|
+0.5 |
dBm |
|
|
Centre W***elength |
λC |
1260 |
|
1270 |
nm |
|
|
LOS De-Assert |
LOSD |
|
|
-15 |
dBm |
|
|
LOS Assert |
LOSA |
-30 |
|
|
dBm |
|
|
LOS Hysteresis |
|
0.5 |
|
|
dB |
|
Notes:
1. Output is coupled into a 9/125um ***F.
2. ***erage Receiver Power (Min) is informative and not the principal indicator of signal strength. A received power below this value cannot be compliant.
3. Measured with a PRBS231-1 test pattern @10.3125Gbps, BER≦10-12
Ordering information
| BDTRX873L1SN-10 | 10G SFP+ module,TX 1270nm/RX 1330nm, 10Gbps, 10km, 0C~+70C | Request price |
| BDTRX837L1SN-10 | 10G SFP+ module,TX 1330nm/RX 1270nm, 10Gbps, 10km,0C ~ +70C | Request price |
| BDTRX873L1SN-20 | 10G SFP+ module,TX 1270nm/RX 1330nm, 10Gbps, 10km, 0C~+70C | Request price |
| BDTRX837L1SN-20 | 10G SFP+ module,TX 1330nm/RX 1270nm,10Gbps,20km,0C~+70C |