MEGAFLEX belts are manuf***ured with thermoplastic Polyurethane 92° shore as standard. Special compounds are ***ailable on request (different hardnesses, speaal properties) please contact our technical staff
COATING
CO***
MEGAFLEX is manufactured with steel co*** as standard. Special co*** are ***ailable on request, please check our feasibility table.
HP : High Performance co*** h***e 25% more strength capacity than standard co***.
HF : High Flexibility co*** can accept ***aller pulley and idler diameters than standard co***.
HPF : High Performance and Flexibility co*** h***e 25% more strength capacity like the HP co***, but they are more flexible than the HP co***.
INOX : Stainless steel co*** h***e 25% less strength capacity than standard co***.
IDENTIFICATION CODE
Using the information in the table below, with our standard codes, it is possible to identify the correct bell for every application The code is composed of letters and number as the following examples.
1 |
|
2 |
|
3 |
|
4 |
|
S |
|
6 |
Mfx |
♦ |
50 |
+ |
AT |
♦ |
10 |
♦ |
10000 |
♦ |
SPECIAL MANUFACTURES |
|
- Mfx : Megaflex Belt
- 50 This number indicates the width of the bell requested. The value is in mm for a belt with a pitch
in mm, and in inches for a belt with a pitch in inches.
- AT ■ This code composed by letters indicates the selection of profile
- 10 : This number indicates the standard pitch of the belt. It is expressed in mm
- 10000 : The last number indicates the length of the belt always in mm regardless of pitch
- SPECIAL MANUFACTURES every belt is ***ailable with particular manufacture like the following lisl
• double teeth belt
special co*** (on request it is possible to obtain high performance and high flexibility cord >^not for every pitch 〇 please contact our technical staff)
extra coating (please contact our staff to evaluate the thickness of the extra coaling and the shore hardness required)
-PU YELLOW -NEOPRENE RUBBER |
-***AFC -TENAX -LINATEX -HONEY COMB