OptrisPI 1M短波长在线红外热像仪产品简介：
***新研发的红外热像仪 optris® PI 1M尤其适合测量金属材质，因为和传统的8～14μm热像仪相比，这种材质在1μm的短波是具有更高的发射率，可以让测量更加精准。
在将热处理过程可视化的同时,高性能传感器拥有极端至1ms的响应时间用来显示中心像素点的温度值。.
OptrisPI 1M短波长在线红外热像仪主要技术参数：
·高动态CMOS 探测器，分辨率***高可达 764 x 480像素
·宽量程 450 °C to 1800 °C
·***高1 kHz超高速帧速率，满足快速响应要求。
·响应时间1ms的实时模拟输出
·Extensive software package and SDK included
·配置包含:
PI 1M红外热像仪,
USB电缆 (1 m),
***三角叫,
PIF cable incl. terminal block (1 m),
软件包optris PI Connect,
Rugged outdoor transport case (IP67)
·探测器: CMOS (15 μm x 15 μm)
·光学分辨率 (可切换）/ 帧速率:
764 x 480 pixels @ 32 Hz
382 x 288 pixels @ 80 Hz (swichable to 27 Hz)
72 x 56 pixels @ 1 kHz
·波段: 0.92 – 1.1 μm
·测温范围:
450 ... 1800 °C (32 and 27 Hz mode)
500 ... 1800 °C (80 Hz mode)
600 ... 1800 °C (1 kHz mode)
·光学镜头可选:
FOV @ 382 x 288 px:
51° x 39° (f = 6 mm)
26° x 20° (f = 12 mm)
20° x 15° (f = 16 mm)
13° x 10° (f = 25 mm)
6,2° x 4,7° (f = 50 mm)
4,0° x 3,0° (f = 75 mm)
·热灵敏度(NETD): < 1 K (700 °C), < 2 K (1000 °C) 75 mK
·***度:读数的 &plu***n;2 % (物体温度 < 1500 °C)
·PC interface: USB 2.0
·High speed analog output (@ 1 kHz mode):
0 – 10 V real time output of the center pixel (1 ms resp***e time)
·Standard Process interface (PIF):
0 – 10 V input, digital input (max. 24 V), 0 – 10 V output
·Industrial process interface (PIF):
2x 0-10 V inputs, digital input (max. 24 V), 3x 0 – 10 V outputs,
3x relay (0 – 30 V/ 400 mA), fail-safe relays
·电缆长度(USB):
1 m (标准), 5 m, 10 m
5 m and 10 m also ***ailable as HT cable (180 °C)
·环境温度 (TAmb): 0 ... 50 °C
·存储温度: -40 ... 70 °C
·Relative humidity: 20 - 80%, non condensing
·外形尺寸 (size/ rating): 46 mm x 56 mm x 90 mm / IP 67 (NEMA 4)
·重量 320 g,含镜头
·Shock1): IEC 60068-2-27 (25 g and 50 g)
·Vibration1): IEC 60068-2-6 (sinus-shaped)/ IEC 60068-2-64 (broadband noise)
·Tripod mount: 1/4-20 UNC
·供电: USB供电