SignalHawk SH-42S
Handheld Spectrum Analyzer手持式频谱分析仪
Technical datasheet技术数据表
2017-01-05
Introduction技术简介
SignalHawk SH-42S is a new generation Handheld Spectrum Analyzer and meets the needs of portbality. SignalHawk SH-42S has light weight,***all size and is easy to gnalHawk SH-42S has highly capability in sensitivity.The excellent performance can meet most RF signals measurement &test requirements.With Android operation system and high-resolution touch screen,Making measurement &test more easier and convenient.
signalhawk sh-42s是新一代手持式频谱分析仪和满足需求的仪表。signalhawk sh-42s具有重量轻、体积小、易于携带。signalhawk sh-42s具有灵敏度高，优异的性能，能够满足大多数射频信号的测量和测试要求，采用Android操作系统和高分辨率触摸屏，使测量和测试更加容易和方便。
SignalHawk Highlights特点
- DANL：-168 dBm @1GHz （Sensitivity set to High,Normalized to 1Hz RBW）
- Resolution Bandwith（RBW）：10Hz~5MHz
- Phase Noise：-98dBc/Hz 10kHz offset @1GHz
- Markers：8 Maximum，surport 1 reference with 7 Delta Markers
- Trace:3 Trace，Clear/Write,Maxhold,Minhold,***erage,View,Hide
- Multi-screen：4 Maximum
- 平均噪声电平：-168 dBm @1GHz（灵敏度设置为高,分辨率带宽统一为 1Hz）
•分辨率带宽（RBW）：10Hz~5MHz
•相位噪声：-98dBc/Hz 10kHz offset @1GHz
•标记：8***大支持 1参考 7三角标记
•跟踪：3 Trace，Clear/Write,Maxhold,Minhold,***erage,View,Hide
多屏：4 Maximum
Capabilities and Functional Highlights性能和功能特点
- Measurement on Channel Power，Occupied Bandwidth，Adjacent channel power ratio，Phase Noise，N dB bandwidth
- Internal Preamplifier standard
- Android operation system
- Fully touch screen,support multi-touch operation
- Light Weight,***all size
- Long battery life,6 hours battery operation times
•内部前置放大器标准
•安卓操作系统
•全触摸屏，支持多点触控操作
•重量轻，体积小
•电池寿命长，电池运行时间6小时
Specificati***规格
|
Fuction功能 |
||||
|
Measurement 测量 |
ACPR,CH Power,OBW,N dB Down,Phase Noise ACPR，CH功率，占用带宽，N分贝下降，相位噪声 |
|||
|
Trace轨迹 |
3 Trace通道,TraceA,TraceB,TraceC |
|||
|
Trace Operation跟踪操作:Clear/Write,Maxhold,Minhold,***erage,View,Hide |
||||
|
Sweep扫描 |
Continuous/Single连续/单次 |
|||
|
Trigger触发 |
Free Video(Zero Span)视频（零跨度） |
|||
|
Marker标记 |
8 maximum, surport 1 reference with 7 Delta Markers |
|||
|
Peak Search,Marker Delta,Marker+,Marker- 峰值搜索，标记三角洲，标记+，标记— |
||||
|
Span范围 |
0Hz,100Hz~4.2GHz |
|||
|
Freq Slip,Span Zoom(1-2-5-10Sequence,4GHz,4.2GHz) |
||||
|
Scale |
Log/Lin |
|||
|
Log :0.1 to 1 0.1 step 1 to 10 1 step |
||||
|
Unit单位 |
dBm,dBuV,dBV,W,mW,uW,pW,V,mV,uV |
|||
|
Sensitivity灵敏 |
Low,Medium,High低，中，高 |
|||
|
Detector探测器 |
Positive,Negative,Sample,***erage,RMS |
|||
|
Ref Level Offset 电平偏移 |
-50dB to 50dB |
|||
|
Multi-screen多屏 |
4 Maximum |
|||
|
Frequency频率 |
||||
|
Frequency Range频率范围 |
10MHz ~ 4.2GHz |
|||
|
Frequency Reference频率参考 |
Aging:&plu***n;1ppm |
|||
|
Frequency readout accuracy频率读数精度 |
&plu***n; (readout frequency x frequency reference accuracy + RBW centering + 0.5 x horizontal resolution &plu***n;（读出频率X频率基准精度+中心+ 0.5×水平分辨率带宽) |
|||
|
Frequency Span Accuracy 频率间隔精度 |
&plu***n;1% |
|||
|
Sweep Time扫描时间 |
1.1ms~1600s 2.69ms~1600s Zero Span |
|||
|
Resolution Bandwith分辨率带宽 |
||||
|
RBW Range范围 |
10Hz~5MHz,(1-2-3-5-10Sequence) |
|||
|
RBW Accuracy精度 |
RBW≥1MHz，&plu***n;10% RBW＜1MHz,&plu***n;2% |
|||
|
Amplitude振幅 |
||||
|
Measurement Range测量范围 |
DANL to +20dBm |
|||
|
Input Attenuator Range 输入衰减范围 |
0~30dB,1dB step |
|||
|
Max Safe input level Max安全输入电平 |
Sensitivity灵敏度:low低 +30dBm Sensitivity灵敏度:medium中 0dBm Sensitivity灵敏度:High 高 -20dBm |
|||
|
Reference Level range 参考值范围 |
-140 dBm ~+20dBm -190dBm ~+70dBm (Ref Level Offset 电平偏移:ON) |
|||
|
Amplitude Accuracy 幅度精度 |
ATT set to 0 dB , input signal -5 to -30 dBm, Detector set to Positive ,Sensitivity set to Low, RBW auto-coupled, all other settings auto-coupled, 23&plu***n;5℃ . Half hour warm-up required. ATT设置为0 dB，输入信号- 5 - 30 dBm，探测器设置为正，灵敏度设置为Low，RBW自动耦合，所有其他的设置自动连接，23&plu***n;5℃. 半小时预热。 |
|||
|
&plu***n;1.5dB |
||||
|
RBW Swiching uncertainty RBW切换误差 |
&plu***n;0.3dB |
|||
|
Input Attenuator uncertainty输入衰减误差 |
&plu***n;0.6dB |
|||
|
Reference Level Accuracy 参考电平精度 |
RL≥-60dBm，&plu***n;0.8dB |
|||
|
Display ***erage Noise Level(DANL) 显示平均噪声电平(DANL) |
Input terminated, Detector set to Positive, Trace ***erage set to 1000, Span set to 50kHz,Reference level of -100 dBm, , all other settings auto-coupled, 23&plu***n;5℃, normalized to 1 Hz RBW 输入终止，探测器设置为正，微量平均设置为1000，间距设置为50kHz，参考电平设置为100 dBm时，所有其他的设置自动连接，23&plu***n;5℃，标准的 1 Hz RBW |
|||
|
Sensitivity灵敏度 ：LOW低 1GHz，-131dBm/Hz（typical -133dBm/Hz） Sensitivity灵敏度：Medium中 1GHz，-151dBm/Hz（typical -153dBm/Hz） Sensitivity灵敏度：High高 1GHz，-168dBm/Hz（typical -169dBm/Hz） |
||||
|
Residual Resp***es |
-75dBm |
|||
|
Input Related Resp***es |
10M~1.285G, 3.22G ~3.7G <-70dBc 1.625G~1.775G <-55dBc 1.285G~1.625G, 1.775G~2.35G, 2.71G~3.22G <-42dBc 3.7G~4.2G <-35dBc 2.35G~2.71G <-25dBc |
|||
|
Second harmonic distortion 二次谐波失真度 |
1.6GHz -70dBc |
|||
|
Third-Order Intercept (TOI) |
(–10dBm tones ,1MHz apart, Sensitivity LOW,Reference Level –10 dBm |
|||
|
+15dBm |
||||
|
P1dB |
+5dBm Norminal |
|||
|
Phase Noise相位噪声 |
1GHz |
-96dBc/Hz,@10kHz(typical -98dBc/Hz) -118dBc/Hz,@1MHz(typical -120dBc/Hz) |
||
|
General |
||||
|
System Setting系统设置 |
Preset,S***eRecall,ScreenCopy,Print,Language,Service,About |
|||
|
Connectors连接器 |
RF In:N type,female,50 Ω USB:USB type C Power interface: Slim Tip,DC20V RF输入:N（F）,50 Ω USB:USB type C 电源接口 Slim Tip,DC20V |
|||
|
Display显示 |
5.5 inch, 1280*720p 5.5英寸，1280 * 720P |
|||
|
OS操作系统 |
Android 安卓 |
|||
|
Battery电池 |
Type:Li-on Operation time:option1：6 hours norminal option2：3.5 hours norminal Charging time: option1：2.5 hours norminal option2：2 hours norminal Charging: 0°C to +35°C Must be in power off state 类型：锂电池 工作时间: 选项1：6 hours 标称 选项2：3.5 hours 标称 充电时间: 选项1：2.5 hours 标称 选项2：2 hours 标称 充电：0°C至35°C必须处于断电状态 |
|||
|
Environmental环境要求 |
Operating Temperature操作温度: 0°C to 50°C Storage Temperature存储温度: -20°C to 70°C |
|||
|
Size尺寸 |
200mm*99mm*67mm（7.8 in*3.9 in* 2.6in） |
|||
|
Weight重量 |
1.25kg（2.8 lb） with battery option1 1.05kg （2.3lb） with battery option2 |
|||
Specificati*** 规格
Specificati*** include guardbands to account for the expected statistical performance distribution, measurement uncertainties, and changes in performance due to environmental conditi***. Specificati*** are warranted clude：
• After 30 minutes of warm-up time, where the instrument is left in the ON state.
• When using the internal reference signal.
If there are other special introduti***,test temperature is on 23&plu***n;5℃.
Typical
Describes additional product performance information not covered by the product warranty. It is performance beyond specificati*** that 80% of the units exhibit with a 95% confidence level over the temperature range 23 &plu***n; 5 ºC, unless otherwise noted. Typical performance does not include measurement uncertainty. SignalHawk SH-42S must be within its calibration cycle. Nominal
A general, descriptive term or design parameter. It is not tested, and not covered by the product warranty. SignalHawk SH-42S must be within its calibration cycle.
SignalHawk SH-42S c***ists of 标准附件
|
Standard标准 |
|
|
1 |
Model SignalHawk SH-42S Spectrum Analyzer 频谱分析仪 |
|
2 |
Hard Carring Case硬质携带箱 |
|
3 |
Soft Carring Case软携带箱 |
|
4 |
Power Adapter(Including Power cable,20V/4.5A output) 电源适配器（包括电源线，20V／输出4.5A） |
|
5 |
USB cable (type C) USB 数据线 (type C) |
|
6 |
USB OTG cable(type C) USB OTG数据线(type C) |
|
7 |
Touch Pen 触摸笔 |
|
8 |
USB drive u盘 |
|
9 |
Introduction Manul(stored on USB drive and Menu selctable from SH-42S) 操作手册（存储在USB驱动器和sh-42s菜单中） |