EV-S90U充电桩电缆

In the production process of rubber sheathed cable, will often appear on the appearance of defects, such as the surface is not ***ooth; the surface of clinker particles (early vulcanized rubber particles) or impurities; cable surface scratch, scratch; surface subsidence; surface twist grain. The following are five common reas*** for the appearance of defects in rubber sheathed cables:

1.模套承线太长或太短、模口不光滑且孔径太大；机头、模口或机身温度低；橡料塑性小等均有可能导致橡套电缆表面不光滑。 EV-S90U充电桩电缆

1 sets of sets of line is too long or too short, die mouth is not ***ooth and the aperture is too large; nose, mold mouth or body temperature is low; rubber material, such as ***all plastic cable may lead to the surface is not ***ooth.

2.供给的橡胶不干净，含有杂质；胶料焦烧时间太短；挤橡机身、机头或口模温度太高；机头内橡胶流动不顺，有橡料滞留死角；螺杆不光滑、粘胶等均有可能导致橡套电缆表面出现熟料粒子（早期硫化橡胶粒子）或杂质。

2 the supply of rubber is not clean, containing impurities; the scorch time is too short; extruding head or body, die temperature is too high; the rubber flow in die flow, rubber material retention dead; screw is not ***ooth, such as glue may lead rubber cable surface of clinker particles (early vulcanized rubber particles) or impurity.

3.模套不光滑，无倒角；有杂质或熟胶粒子堵住模口；在硫化管内拖管擦伤；硫化管出口密封橡皮垫圈孔径偏小等均有可能导致橡套电缆表面划伤、擦伤。 EV-S90U充电桩电缆

3 die set is not ***ooth, no chamfer; impurities or glue particles by the die in the tube tube; vulcanized abrasion; vulcanized rubber gasket sealing pipe outlet aperture is too ***all may lead rubber surface scratch, scratch cable.

4.模套孔径太大；导电线芯外层股线间、单丝间空隙偏大，缆芯外径不均匀；橡料塑性小，粘性差；橡料中有杂质；对模距离小，压力小等均有可能导致橡套电缆表面塌陷。 EV-S90U充电桩电缆

4 die sleeve aperture is too large; the conductive wire core outer strands, monofilament gap is too large, the cable core diameter is not uniform; rubber plastic material, low viscosity; impurities rubber material; the mould distance is ***all, ***all pressure are likely to lead to the collapse of rubber cable surface.

5.模套孔径太小；橡料挤出不足，线芯缝隙填不满；导电线芯或缆芯跳线；对模距离短等均有可能导致橡套电缆表面出现麻花纹。

5 sets of sleeve diameter is too ***all; the rubber material is not enough, the core of the gap filling; conductive wire core or cable core jumper; short distance to the mold and so on are likely to cause the surface of the rubber cable twist.

橡套电缆是由多股的细铜丝为导体，外包橡胶绝缘和橡胶护套的一种柔软可移动的电缆品种。 一般来讲，包括通用橡套软电缆，电焊机电缆，潜水电机电缆，无线电装置电缆和摄影光源电缆等品种。

Rubber sheathed cable is a kind of flexible and movable cable which is made up of many strands of fine copper wire, which is made of rubber and rubber sheath. In general, including general rubber sheathed flexible cable, electric welding machine cable, submersible motor cable, radio equipment cable and photographic light source cable and other varieties.

产品概述：

Product overview:

橡套电缆广泛使用于各种电器设备，例如日用电器，电动机械，电工装置和器具的移动式电源线。同时可在室内或户外环境条件下使用。根据电缆所受的机械外力，在产品结构上分为轻型、中型和重型三类。在截面上也有适当的衔接。

Rubber sheathed cables are widely used in various electrical equipment, such as household appliances, electrical machinery, electrical equipment and appliances, mobile power cord. At the same time can be used in indoor or outdoor environment. According to the mechanical force of the cable, it can be divided into three categories: light, medium and he***y. There is also a proper connection in the section.

一般轻型橡套电缆使用于日用电器、小型电动设备，要求柔软、轻巧、弯曲性能好；

General light rubber sheathed cables are used in household electric appliances and ***all electric equipment;

中型橡套电缆除工业用外，广泛用于农业电气化中；

Medium sized rubber sheathed cables are widely used in agricultural electrification;

重型电缆用于如港口机械、探照灯、家业大型水力排灌站等场合。这类产品具有良好的通用性，系列规格完整，性能良好和稳定。

He***y duty cables are used in such areas as port machinery, searchlights, large scale irrigation and drainage stati***. This product has a good versatility, series of complete specificati***, good performance and stability.

应用范围：

Application scope:

防水橡套电缆和潜水泵用电缆：主要用于潜水电机配套， 型号为JHS，JHSB。

Waterproof rubber cable and submersible pump cable: mainly used for submersible motor matching, model JHS, JHSB.

无线电装置用电缆：现在主要生产两种橡套电缆(一种屏蔽的,一种不屏蔽)，基本能满足要求，型号为WYHD，WYHDP。

Wireless device cable: now the main production of two kinds of rubber cable (a kind of shield, a kind of non shielding), the basic can meet the requirements, the model is WYHD, WYHDP.

摄影用电缆产品：配合新型光源的发展，具有结构小、性能好，同时满足室内和野外工作的需要，逐步取代一些粗重、耐热性能差的老产品。

Cable product photography: combined with the development of new light source, has the advantages of ***all structure, good performance, and meet the needs of indoor and field work, gradually replaced the he***y and poor heat resistance of old products.

注意事项：

Matters needing attention：

一、设备：具有自动控温、定时和多规格管状模腔的小型压力设备。

Equipment: ***all pressure equipment with automatic temperature control, timing and multi specification tubular c***ity.

二、胶料：与所补电线的线材一致，并且含胶量要高于被补材料，硫化体系略强。

Two, rubber material: with the wire of the wire, and the amount of glue to be higher than the material, curing system slightly stronger.

三、操作方法：

Three, operation method:

1、按照胶料的硫化体系设定温度和时间

1, set the temperature and time according to the vulcanization system

2、用橡胶用油墨稀释剂檫洗修补处，特别是结合处要充分处理。

2, the use of rubber thinner ink wash repair department, in particular, to fully deal with the junction.

3、根据缺口的大小适量剪取修补胶料，注意不能偏多或偏少，

3, according to the size of the amount of their gap repair adhesive material, not too much or too few,

4、将剪好的胶料塞在缺口处，，注意胶料不要高于电线圆周面。

4, will cut the rubber material in the gap, pay attention to the rubber material is not higher than the circumference of the wire.

5、用耐高温PP带包好。并将其放入比线径略小的管状模腔里，锁紧上下模，让所补位置具有一定的压力。注意模腔直径比线径略小0.1~0.2mm。

5, with high temperature resistant PP bag. And put it into the tubular c***ity is ***aller than the line size in the lock on mode, make up position has a certain pressure. Note the c***ity diameter is ***aller than the diameter of 0.1~0.2mm.

6、待硫化时间到，取出产品，如有少量胶料溢出，用锋利刀片修尽，并用稀释剂檫尽即可。

6, time to be vulcanized, take out the product, if there is a ***all amount of plastic overflow, with a sharp blade repair, and thinner can be used sassafras.

四、验证方法：

Four, verification method:

将适量空气压入所补电线并置于水中，见有无漏气现象即可判定好坏。

Press the right amount of air into the wire and put it in the water.