Synchroflex synchronous belt using raw materials:

Synchroflex synchronous belt using raw materials:
The use of imported high-quality synthetic chloroprene rubber as the main raw material, mixed with a variety of different uses of materials; reinforcing materials for imported high quality glass fiber cord; with tooth surface protection with high elastic nylon cloth 66. The utility model has the advantages of good dynamic bending property, good anti cracking performance, good ozone performance, aging resistance, heat resistance, oil resistance, wear resistance, etc..
Synchroflex synchronous belt characteristics:
Synchroflex synchronous belt is a new type of tran***ission mode, which uses the meshing of teeth and gear teeth to transfer power. Accurate synchronous tran***ission function, no lubrication, no slip, no pollution, low noise; tran***ission efficiency of 0.98, the ratio range of up to 1:10, allowing the line speed up to 50m/s, the tran***ission rate from several hundred watts to hundreds of kilowatts, suitable for multi axis drive.
The neoprene synchronous belt is widely used in textile, automobile, chemical fiber, cigarette, paper making, printing and chemical industries. In recent years, the demand for mining, metallurgy, iron and steel machinery and medical equipment has been increasing.
The pitch and tooth profile of the double side toothed synchronous belt are the same as that of the single tooth synchronous belt. Such as by the arrangement of teeth and can be divided
Type DA (with teeth arranged symmetrically) as shown in figure a; type DB (with staggered teeth arrangement, see Figure b)
The T synchronous belt, under the same driving system, improves the engine efficiency and allows the engine to run ***oothly and quietly;
Synchroflex synchronous belt specificationtype size table type pitch (mm) (mm) with high tooth thickness (mm) angle check? MXL2.0320.511.1440 specificati*** for the XL5.0801.272.3050 specificati*** for the L9.5251.913.6040 specificati*** for the H12.702.294.3040 specificati*** for the XH22.2256.3511.2040 specificati*** with XXH31.7509.5315.7040 specificati*** for the T2.52.50.71.3040 specificati*** for the T551.202.2040 specificati*** for the T10102.504.5040 specificati*** for the T20205.008.0040 specificati*** for the AT551.202.7050 specificati*** for the AT10102.505.0050 specificati*** for the AT20205.008.0050 specificati*** for synchronous belt specificati*** and the size of XL (=5.080mm) gauge? Lattice pitch length (mm) die width (mm) tooth number 44XL111.761002256XL142.241602860XL152.402003070XL177.802003576XL193.041003880XL203.202004082XL208.282004184XL213.362004288XL223.522004490XL228.602004592XL233.681004694XL238.762004796XL243.842004 898XL248.9220049100XL254.0045050102XL259.0845051104XL264.1645052106XL269.2445053108XL274.3520054110XL279.4045055112XL284.4845056114XL289.5620057116XL294.6445058118XL299.7245059120XL304.8045060122XL309.8845061124XL314.9645062126XL320.0445063128XL325.124506 4130XL330.2020065132XL335.2820066134XL340.3645067136XL345.4420068140XL355.6045070142XL360.6845071144XL365.7645072146XL370.8445073148XL375.9245074150XL381.0045075152XL386.0845076154XL391.1645077156XL396.2445078160XL406.4045080162XL411.4845081164XL416.56450 82166XL421.6420083168XL426.7245084170XL431.8045085172XL436.8845086176XL447.0445088178XL452.1245089180XL457.2045090182XL462.2845091184XL467.3645092188XL477.5245094190XL482.6045095194XL492.7645097196XL497.8445098198XL502.9245099200XL508.0020 0100202XL513.08450101206XL523.24450103208XL528.32450104210XL533.40450105212XL538.48450106214XL543.56450107218XL553.72450109220XL558.80450110226XL574.04450113228XL579.13450114230XL584.20450115234XL594.36450117236XL599.44450118240XL609.60450120248XL629.9216 0124250XL635.00450125256XL650.24450128260XL660.40450130270XL685.80450135274XL695.96450137276XL701.04200138280XL711.20450140282XL716.28200141286XL726.44450143290XL736.60200145300XL762.00200150304XL772.16450152310XL787.40450155316XL802.64450158320XL812.8045 0160326XL828.04450163330XL838.20450165336XL853.44450168340XL863.60450170344XL873.76450172348XL883.92200174352XL894.08450176360XL914.40450180362XL919.48450181364XL924.56200182372XL944.88450186376XL955.40