Digital Input/Counter | ||
Input Channels | 4 | |
Type | Wet Contact (Sink) | |
On Voltage Level | +3.5 VDC ~ 50 VDC | |
Off Voltage Level | +1 V max. | |
Input Impedance | 10 KΩ, 0.66 W | |
Counters | Channels | 4 |
Max. Counts | 65535 (16-bit) | |
Max. Input Frequency | 100 Hz | |
Min. Pulse Width | 5 ms | |
Overvoltage Protection | 70 VDC | |
Digital Output | ||
Output Channels | 4 | |
Type | Isolated Open Collector (Source) | |
Max. Load Current | 650 mA/channel | |
Load Voltage | +10 VDC ~ +40 VDC | |
Overvoltage Protection | 47 VDC | |
Overload Protection | Yes | |
Short-circuit Protection | Yes | |
Power On Value | Yes, Programmable | |
Safe Value | Yes, Programmable |
Communication | ||
Interface | RS-485 | |
Format | (N, 8, 1), (N, 8, 2), (O, 8, 1), (E, 8, 1) | |
Baud Rate | 1200 ~ 115200 bps | |
Protocol | DCON, Modbus/RTU, Modbus/ASCII | |
Dual Watchdog | Yes, Module (2.3 seconds), Communication (Programmable) | |
LED Indicators | ||
Power | 1 LED as Power Indicator | |
Isolation | ||
Intra-module Isolation,Field-to-Logic | 3750 VDC | |
EMS Protection | ||
ESD (IEC 61000-4-2) | &plu***n;4 kV Contact for Each Terminal | |
&plu***n;8 kV Air for Random Point | ||
EFT (IEC 61000-4-4) | &plu***n;4 kV for Power | |
Power Requirements | ||
Reverse Polarity Protection | Yes | |
Powered from Terminal Block | Yes, 10 ~ 30 VDC | |
C***umption | 0.5 W Max. | |
Mechanical | ||
Dimensi*** (W x L x H) | 52 mm x 98 mm x 27 mm | |
Installation | DIN-Rail Mounting | |
Environment | ||
Operating Temperature | -25 °C ~ +75 °C | |
Storage Temperature | -30 °C ~ +75 °C | |
Humidity | 10 ~ 95% RH, Non-condensing |