企业资质

意蝶阀门(上海)有限公司

普通会员8
|
企业等级:普通会员
经营模式:
所在地区:上海 上海
联系卖家:
手机号码:
公司官网:www.ydfm.net
企业地址:
企业概况

意蝶阀门(上海)有限公司是一家具有二十多年历史的大型阀门生产企业,是全国最主要和最大的闸阀、截止阀、球阀、蝶阀、水力控制阀等通用阀门供应商之一。在石油、化工、冶金、电力、建筑、热力、供水等行业具有很高的知名度及影响力。产品一直供不应求,畅销国内外市场。意蝶阀门(上海)有限公司创建于1989年2月,现......

进口气动隔膜泵‖GERMANY BACH/上海代理

产品编号:7744896                    更新时间:2018-04-12
价格: ¥888.00

意蝶阀门(上海)有限公司

  • 主营业务:进口阀门、进口水泵、进口环保设备
  • 公司官网:www.ydfm.net
  • 公司地址:

联系人名片:

联系时务必告知是在"产品网"看到的

产品详情

进口气动隔膜泵‖GERMANY BACH/上海代理

 

一、产品概述:

气动隔膜泵是一种新型输送机械,采用压缩空气为动力源,对于各种腐蚀性液体,带颗粒的液体,高粘度、易挥发、***、***的液体,均能予以抽光吸尽。

气动隔膜泵这种泵的主要分类:气动隔膜泵,不锈钢气动隔膜泵

气动隔膜泵其有四种材质:工程塑料、铝合金、铸铁、不锈钢。气动隔膜泵根据不同液体介质分别采用***橡胶、氯丁橡胶、氟橡胶、聚四氟乙烯、聚四六乙烯等,以满足不同用户的需要。安置在各种特殊场合,用来抽送各种常规泵不能抽吸的介质,均取得了满意的效果。

 

二、产品使用特点:

●由于用气体作动力,所以流量随背压(出口阻力)的变化而主动调节,适合用于中高粘度的流体。而离心泵的工作点因以水为基准设定好的,如果用于粘度稍高的流体,则必需配套减速机或变频调速器,成本就大大的提高了,对于齿轮泵也是如此。

●在******的环境中用气动泵可靠且成本低,如燃料、***、***的输送,因为:

●接地后不可能产生火花;

●工作中无热量产生,机器不会过热;

●流体不会过热,因为气动隔膜泵对流体的搅动***小。

●在工地恶劣的***,如修建工地、工矿的废水排放、由于污水中的杂质多且成分复杂,管路易于梗塞,这样对电动泵就形成负荷过高的环境,电机发热易损。气动隔膜泵可通过颗粒且流量可调,管道梗塞时主动停止。

●另外气动隔膜泵体积小易于挪动,不需要地基,占地面积小,安置简便经济。可作为挪动式物料输送泵。

●在有危害性、腐化性的物料处理中,隔膜泵可将物料与外界完全隔离。

●或是一些实验中保证没有杂质污染原料。

●可用于输送化学性质比较不稳定的流体,如:感光材料、絮凝液等。这是因为隔膜泵的剪切力低,对材料的物理影响小。

 

三、技术参数:

流量:0-30m3/h;

扬程:0-50m;

口径:10-100mm;

温度:-15-+150℃;

压力:0.1-0.7MPa;

自吸高度:5-7m

 

First, product overview:
Pneumatic diaphragm pump is a new type of conveying machinery, using compressed air as a power source, for all kinds of corrosive liquid, with granular liquid, high viscosity, volatile, flammable, toxic liquid, all can be pumped out.
The main categories of pneumatic diaphragm pumps are pneumatic diaphragm pumps, stainless steel pneumatic diaphragm pumps.
The pneumatic diaphragm pump has four kinds of materials: engineering plastics, aluminum alloy, cast iron and stainless steel. The pneumatic diaphragm pump adopts NBR, chloroprene rubber, fluororubber, polytetrafluoroethylene, 46 ethylene, etc. to meet the needs of different users. Placed in a variety of special occasi***, for pumping various conventional pumps can not pump the medium, both with satisfactory results.

Two. The characteristics of the use of the product:
Because because of the power of gas, the flow rate is adjusted with the change of back pressure (outlet resistance), so it is suitable for medium and high viscosity fluids. And the working point of the centrifugal pump is set because of water as the benchmark. If it is used for a fluid with a slightly higher viscosity, the gear reducer or variable frequency governor must be matched, and the cost is greatly improved, so is the gear pump.
In the flammable and explosive environment, pneumatic pumps are reliable and low cost, such as fuel, propellant and explosive transportation.
It is impossible to produce sparks after grounding.
• no heat is generated in the work, and the machine will not overheat.
• fluid will not overheat, because pneumatic membrane pump is the least stirring.
In the bad center of the c***truction site, such as the c***truction site, the waste water discharge of the industrial and mining, the complex of the impurity and the composition in the sewage, the pipeline is easy to infarct, so the load of the electric pump is too high and the motor is hot and easy to lose. Pneumatic diaphragm pump can be adjusted by particle and flow rate, and the pipeline will stop actively when it stops.
Besides, the pneumatic diaphragm pump is ***all and easy to move. It doesn't need foundation. It has ***all footprint and easy and economical placement. It can be used as a moving material delivery pump.
In the process of hazardous and putrefaction of materials, the diaphragm pump can completely isolate the material from the outside world.
And some experiments ensure that no impurities pollute the raw materials.
It can be used to transport unstable chemical fluid, such as photosensitive material, flocculating liquid and so on. This is because the shear force of the diaphragm pump is low, and the physical influence on the material is ***all.

Three. Technical parameters:
Flow: 0-30m3/h;
Lift: 0-50m;
Caliber: 10-100mm;
Temperature: -15-+150 C;
Pressure: 0.1-0.7MPa;
Self priming height: 5-7m

 

品牌介绍:
BACH集团是***的离心泵及电动潜水泵生产商,为综合水处理提供新颖***的解决方案。集团于1945年由 Huang su 创立,集团自创立以来规模不断壮大,业务内容不断多样化,为满足水处理领域日益变化及特殊的需要,与广大客户建立更紧密更具体的合作关系,集团不断推出新产品新服务。集团拥有***、多样化的***技术,可为各类供水需求提供***好和***有效的解决方案,如:深井泵、污水提升泵、民用、工业用、农用水供给以及一般水处理设备。
 
本公司***为钢铁、有色金属、电力、石化、***、汽车、机械设备、电气仪表、食品饮料、橡胶制品、医药、纺织、造纸、印刷、水泥、玻璃、环境设备等生产制造型企业提供欧洲高品质工业产品、成套设备和技术应用服务。

详细请咨询:Su wen bin  (苏文宾)
Please do not hesitate to contact me if you need any further clarificati***
***;   3202186864
Mobile Phone :1 3 9 1 7 3 8 3 9 7 7  (微信同号)
Company Phone :0 2 1 - 5 1 6 1 9 3 9 8
Add :  上海徐汇区龙漕路145弄
网址 :h t t p : / / w w w . y d f m . n e t

意蝶阀门(上海)有限公司电话:传真:联系人:

地址:主营产品:进口阀门、进口水泵、进口环保设备

Copyright © 2025 版权所有: 产品网店铺主体:意蝶阀门(上海)有限公司

免责声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责。产品网对此不承担任何保证责任。