圆锥滚子扬州INA轴承由内圈，滚子和笼子，可承受较大的径向和轴向负荷。今天，我们将介绍圆锥滚子轴承的安装条件。为了保证轴承的寿命和可靠性，有必要根据位置，选择适当的轴承转速、倾角、轴承的温度和速度。
Tapered roller Yangzhou INA bearings c***ist of inner rings, rollers and cages, which can withstand large radial and axial loads. Today, we will introduce the installation conditi*** of tapered roller bearings. In order to ensure the life and reliability of the bearing, it is necessary to select the appropriate bearing speed, inclination angle, bearing temperature and speed according to the position.
1，使用零件。扬州INA轴承是轴承。轴承是***轴承行业的***地位和维护。有超过两万标准产品提供轴承。
1, use parts. Yangzhou INA bearing is bearing. Bearing is the leading position and maintenance of the global bearing industry. There are more than twenty thousand standard products to provide bearings.
圆锥滚子扬州INA轴承适用于径向和轴向载荷。这两组轴承通常成对使用。这些轴承主要用于驱动汽车零件，如主动锥齿轮，差速器，前后轮毂（外形：圆柱形），减速器，等。
The tapered roller Yangzhou INA bearing is suitable for radial and axial loads. These two sets of bearings are usually used in pairs. These bearings are mainly used to drive automotive parts, such as active bevel gears, differential, front and rear hub (shape: cylindrical), reducer, etc.
2，倾斜是允许的。
2, tilt is allowed.
在一般情况下，圆锥滚子扬州INA轴承不允许轴相对外壳孔倾斜，如有倾斜，应小于2。
In general, tapered roller Yangzhou INA bearing does not allow the shaft to tilt relative to the housing hole, if there is a tilt, should be less than 2.
3，允许速度。
3, allow speed.
正确的安装和良好的润滑条件下，它可以0.3-0.5倍轴承的极限转速（一般分极限速度是***合适的）。丰富的扬州INA轴承领域的经验，我们的知识和***发展的需要，以及各种***的工程产品的开发应用。一个体重仅6克的微型轴承，大至34吨的大型轴承。
Under proper installation and good lubrication conditi***, it can be 0.3-0.5 times the limit speed of the bearing (the general sub-limit speed is the most appropriate). Rich Yangzhou INA bearing field experience, our knowledge and professional development needs, as well as the development and application of various advanced engineering products. A miniature bearing with a weight of only 6 grams and a large bearing of up to 34 t***.
4，允许温度。
4, permissible temperature.
通常，在30摄氏度的扬州INA轴承得到充分润滑和油（减少或避免摩擦和磨损）在正常负荷在150摄氏度。
Generally, Yangzhou INA bearings at 30 degrees Celsius are fully lubricated and oiled (reducing or ***oiding friction and wear) at normal loads at 150 degrees Celsius.
文章来自：扬州SKF轴承 www.wh-
文章来自：扬州INA轴承 a-
文章来自：扬州NSK轴承
***：524085168
电话：0510-81207777
手机：13311666672