Peppers接管式防爆格兰（A*RCC系列）
Peppers接管式防爆格兰（A*RCC系列）
上海颐品自动化科技有限公司
Peppers防爆格兰，Peppers防爆变径，Peppers防爆堵头，Peppers防爆呼吸阀等
Peppers Cable Gland Type A*RCC
(Single Compression Gland featuring a Freely Rotating Flexible Metallic Conduit Connector)
“A*RCC” type glands are certified Flameproof Ex d, Increased Safety Ex e, Restricted Breathing Ex nR and Dust Protected Ex ta. They are suitable for use in Zone 1 and 2 for Gas Groups IIA, IIB and IIC and additionally for use in Zones 20, 21 and 22 for Dust Groups IIIA, IIIB and IIIC. Commonly referred to as “stuffing glands”, they provide a controlled pull resistant environmental displacement seal on the cable outer sheath, minimising damage to cables that exhibit “cold flow” characteristics. The gland maintains IP66 & IP68 to 50 metres. It is supplied with an IP O-ring seal as standard on metric entry threads. The gland features a freely rotating flexible conduit connection.
Example Part Numbering (See below for details)： A2RCCBF/NP/20-1/M20
Materials: Aluminium, Brass or Stainless Steel 316L Electroless Nickel
• Gland size does not necessarily equate to the entry thread size.
• The IP O-ring seal is only ***ailable on metric entry threads. IP washers can be supplied for tapered entry threads.
• Dimensi*** (A) & (B) may differ for glands with non metric entry threads. Please refer to our “Thread Reference Tables” for specific dimensi***.
• Assembly instructi*** must be read prior to installation and adhered to in full.
• Peppers supplies cable glands with parallel entry threads that conform to the flameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standa***. They usually incorporate a thread run out according to the ***ailable machining techniques and will not h***e a full form thread for the entire length. Peppers Cable Glands Limited will not be held resp***ible for clients’ installati*** where this has not been taken into account.
• When selecting IP Washer material for gland kits, please be aware of the accessories temperature range to ensure they are suitable for the intended installation.
• Where approval in addition to ATEX and IECEx is required, this must be clearly requested at time of enquiry / order.
• It is the installer’s resp***ibility to ensure that the flexible conduit is secured correctly.
• If fit testing is required for specific conduit please contact Peppers.