美国FULLRIVER蓄电池DC35-12/12V35AH现货价格Fullriver DC35-12 Deep-Cycle AGM Battery
Fullriver DC Series Deep Cycle batteries are designed to be deeply discharged and recharged hundreds of times. They are designed and built differently than automotive starting batteries. They use more lead, he***ier plates and other proprietary materials that enable them to deliver more power and capacity over many life cycles.
美国FULLRIVER蓄电池DC35-12/12V35AH现货价格Deep Cycle batteries are used in many applicati*** including: Boats, RV's, Solar and Wind Power, Electric Vehicles, Electric Golf Cars, Floor Cleaning machines, Aerial Work Platforms and many more. Fullriver's DC Series batteries provide the performance and life of a true deep cycle battery with all the conveniences and benefits of being maintenance free & non-hazardous.
美国FULLRIVER蓄电池DC35-12/12V35AH现货价格Features and Benefits of Fullriver Battery
- Maintenance Free, Spill-proof, sealed c***truction provides an environmentally friendly non-hazardous battery that is DOT, IATA, ICAO and IMDG approved for transportation by land, sea and air.
- Environmentally c***cious, jar-formed, high-density plates undergo a 10-day curing process for superior bonding of the paste to the he***y duty lead, calcium and tin grids. This ensures fully formed, voltage matched plates for long life, true deep cycle functionality and recovery.
- Compression of highly micro-porous, glass mat separator provides superior contact between electrolyte and plates for maximizing capacity while providing extreme shock and vibration resistance.
- Our fire retardant ABS case, cover resins and epoxy seals combine to form a truly safe sealed battery that is non-hazardous, highly durable, and capable of being mounted in any direction except inverted.
-
电池的荷电状态可以通过 25℃下、电池静止 24h 后、测量其开路电压来判断。
不同荷电态下电池开路电压
储存期间电池的再充电:应以 2.35V/单体充电 8~12h;
对电流的限制是必要的,但代理适宜的是将充电
电流限制在 0.2C10(A)以内;
测量储存中电池的开路电压可以知道电池是否应该充电,如果电池单体电压降至 2.10V 以下就应该及时地补充电;
如果不能对上述条件进行有效地控制就会导致电池寿命降低或性能变差。
几种不正常的使用
美国FULLRIVER蓄电池DC35-12/12V35AH现货价格偶尔的深放电:
电池不应该使用小于系统要求的小电流长时间的放电,否则会导致电池过早的容量***;
电池被完全放电:电解液中的***已经全部利用,几乎只有水;在这种条件下再充电会产生铅枝晶,铅枝晶会穿透隔板,造成短路;
板的***化程度是代理高、电池内阻也是代理大。
安装、调试与维护
安装
电池随使用设备安装时要满足设备安装要求;单独安装在电池架/柜时要使用地脚螺栓固定。承载地面要有足够的承载能力。
电池和电池柜/架的安装应该符合设计要求或设计文件。美国FULLRIVER蓄电池DC35-12/12V35AH现货价格 连接
连接之前,***检查所有电池、连接件,是否有硬性损坏或加工缺陷,确保极性正确。充电设备处在“断开”状态、不连接负载,将电
池(组)按正确的极性与充电器连接。
安装、搬运电池时应使用绝缘工具、戴绝缘手套、围裙和防护眼镜;搬运过程中,防止碰撞冲击,不得扭动端子和安全阀。 严禁将工具、杂物或其它导电物品放在电池上。 脏污的接线端子或不牢固的连接均可能引起电池打火,所以要保持接线端子在连接处的清洁,并拧紧专用连接电缆,使扭矩达到要求值, 并不对端子产生扭曲应力。
调试
保证电池要在洁净的环境下运行:
在使用之前,电池要根据环境温度调整恒定的浮充电压充电,例如在 25℃用 2.23~2.27V/单体充电 16~24h,或者,在 25℃用 2.33~2.40V/
美国FULLRIVER蓄电池DC35-12/12V35AH现货价格单体的电压可以使时间减少至 8h~12h。如果电池储存状况比较恶劣,调整充电电压是必要的。