进口水环式真空泵/Vacuum pump/德国品质
德国KAYSEN凯森进口水环式真空泵概述
水循环真空泵高温度≤100℃,特殊配置可达150℃,环境温度一般≤40℃***大工作压力(进口压力+泵送压力)：1.0MPa(Hsp≤75m)或1.6MPa (Hsp>75m)特殊配置可分别达1.6MPa或2.5Mpa允许输送介质。
一.水循环真空泵原理
水循环真空泵高温度≤100℃,特殊配置可达150℃,环境温度一般≤40℃***大工作压力(进口压力+泵送压力)：1.0MPa(Hsp≤75m)或1.6MPa (Hsp>75m)特殊配置可分别达1.6MPa或2.5Mpa允许输送介质：清水或物理化学性质类似清水的其他液体密封水管部件：进口压力≥0.03 Mpa 时不安装 结构设计：单级双吸轴向中开涡壳离心泵,卧式安装,驱动机(电动机或内燃机)可根据需要设置在泵的左侧或右侧(即面向出口,驱动机在左侧为逆时针旋转。
主要特点：
●节水效果明显。
由于采用水循环作业，加入水箱内的水可循环使用，克服了那种用直接冲放自来水方法获取真空时大量浪费水的现象。经实测，以一个工作日连续作业计算，在达到同样真空度的条件下，使用本产品可节水10吨以上，而且，一次加水，可长期使用，这在水源缺乏或水压不足的实验室尤其适用。
●多功能综合作用。
本机除可以提供真空条件外，还可同时进行外循环作业，为反应装置提供循环冷却水。本机与自来水源连接，通过适量补充注水源，可以在较长时间连续作业情况下，保持真空循环水温度和水质不变，既可确保真空度下降，又能实现循环冷却水的供应。
●造型新颖，使用方便。
本机安装了两个抽气嘴，可单独或同时抽气作业。每个抽气嘴各装一个真空表，可以方便地观察真空度，抽气管路上装有止回阀，可防止抽真空作业意外停机时，循环水回流到被抽真空的设备中去。耐腐蚀、无污染。本机水泵部件采用不锈钢，不受酸碱等腐蚀物的影响;同时不产生任何污染实验室的油污、杂质等。
主要优点：
●体积小
●重量轻
●移动方便
●高度较低
●操作方便
●耐腐蚀
Germany KAYSEN imported water ring vacuum pump overview
Water circulation vacuum pump high temperature ≤100 °C, special configuration up to 150 °C, ambient temperature generally ≤40 °C maximum working pressure (inlet pressure + pumping pressure): 1.0 MPa (Hsp ≤ 75 m) or 1.6 MPa (Hsp > 75 m) special configuration The medium can be transported up to 1.6 MPa or 2.5 MPa, respectively.
1. Principle of water circulation vacuum pump
Water circulation vacuum pump high temperature ≤100 °C, special configuration up to 150 °C, ambient temperature generally ≤40 °C maximum working pressure (inlet pressure + pumping pressure): 1.0 MPa (Hsp ≤ 75 m) or 1.6 MPa (Hsp > 75 m) special configuration It can be transported to 1.6MPa or 2.5Mpa respectively: other liquid sealed water pipe parts with clear water or physical and chemical properties similar to clean water: no installation structure design when inlet pressure ≥0.03 Mpa: single-stage double-suction axial open-core volute centrifugal pump, For horizontal installation, the drive unit (motor or internal combustion engine) can be placed on the left or right side of the pump as needed (ie facing the outlet, the drive is rotated counterclockwise on the left side).
main feature:
● The water s***ing effect is ***ious.
Due to the water circulation operation, the water added to the water tank can be recycled, which overcomes the phenomenon that a large amount of water is wasted when the vacuum is directly extracted by tapping the tap water. According to the actual measurement, the continuous operation of one working day can s***e more than 10 t*** of water under the condition of the same vacuum. Moreover, the water can be used for a long time in one time. This is in the laboratory with lack of water or insufficient water pressure. Especially suitable.
● Multi-functional comprehensive function.
In addition to providing vacuum conditi***, the machine can also perform external circulation operati*** at the same time to provide circulating cooling water to the reaction unit. The machine is connected with the tap water source. By properly replenishing the water source, the vacuum circulating water temperature and water quality can be kept c***tant under continuous operation for a long time, which can ensure the vacuum degree is reduced and the circulating cooling water can be supplied.
●The style is novel and easy to use.
This machine is equipped with two suction nozzles, which can be pumped separately or simultaneously. Each vacuum nozzle is equipped with a vacuum gauge, which can conveniently observe the vacuum degree. The suction pipeline is equipped with a check valve to prevent the circulating water from flowing back into the vacuumed equipment when the vacuuming operation is stopped unexpectedly. Corrosion-resistant, non-polluting. The pump parts of the machine are made of stainless steel, which is not affected by corrosive substances such as acid and alkali; at the same time, it does not produce any oil pollution and impurities that pollute the laboratory.
The main advantage:
● ***all size
●Light weight
● Easy to move
●Low height
● Easy to operate
● corrosion resistance
