进口泥浆泵/Mud pump/德国品质
德国KAYSEN凯森进口泥浆泵概述
泥浆泵也是一种宽泛的泵的一个通俗概念，不同的地域，习惯，***终涉及的泵型不会一样，本词条所阐述的泥浆泵是多数意义上的的一种泵型：石油钻井领域的所应用的泥浆泵。事实上，污水泵，渣浆泵等一些非清水泵和泥浆泵在叫法上也有通用的时候。本词条给读者阐述的是钻井领域的泥浆泵。
主要特点：
●可输送高浓度高粘度<10000PaS及含有颗粒的悬浮浆液。
●输送液流稳定、无过流、脉动及搅拌、剪切浆液现象。
●排出压力与转速无关 ，低流量也可保持高的排出压力。
●流量与转速成正比，通过变速机构或调速电机可实现流量调节。
●自吸能力强，不用装底阀可直接抽吸液体。
●泵可逆转，液体流向由泵的旋转方向来改变，适用于管道需反正向冲洗的场合。
●运转平稳、振动、噪声小。
●结构简单、拆装维修方便。
主要应用：
使用于矿山、造纸、印染、环保、石墨、云母、黄金、陶瓷、炼油、石油、化工、农场、盐场、碘场、染化、酿酒、食品、化肥、焦化选厂、建筑、大理石厂、金矿、泥浆、流沙、泥塘、污塘、污浊液送吸浓浆稠液、装料及悬浮物质的污水作业，也可作煤矿排水及含有泥块的流体。
注意事项：
泥浆泵开机前，请检查进水管、出水管是否有堵塞，向前后轴承是否加注黄油，检查盘根是否充满。泥浆泵工作时应配备高压清水泵，将大于泥浆泵压力的清水输向防漏填料，对填料进行防护，泥浆泵工作时不得关闭冲洗泵，否则，将使密封部分迅速磨损。叶轮与护板之间的间隙是否合理，对泥浆泵寿命影响很大。间隙不合理，则泵运转时产生振动与噪音，过流部件很快损坏，因此更换叶轮时，应注意使间隙满足图纸要求，间隙调整，可通过后轴承体上的调整螺钉来进行。泥浆泵的允许吸程是在输送清水时测定的，在抽吸泥浆时应考虑泥浆对吸上能力的影响。
Germany KAYSEN imported mud pump overview
Mud pump is also a common concept of a wide range of pumps. Different regi***, habits, and ultimately the pump type will not be the same. The mud pump described in this entry is a pump type in most sense: oil drilling The applied mud pump. In fact, some non-clean water pumps and mud pumps, such as sewage pumps and slurry pumps, are also commonly used when they are called. This entry is for the reader to explain the mud pump in the drilling field.
main feature:
● It can transport high concentration and high viscosity <10000PaS and suspended slurry containing particles.
●The conveying liquid flow is stable, no over-current, pulsation and stirring, shearing slurry phenomenon.
● The discharge pressure is independent of the speed, and the low flow rate can also maintain a high discharge pressure.
● The flow rate is proportional to the speed. The flow rate can be adjusted by the shifting mechani*** or the speed regulating motor.
●The self-priming ability is strong, and the liquid can be directly sucked without the bottom valve.
● The pump can be reversed, and the liquid flow direction is changed by the rotation direction of the pump. It is suitable for the occasion where the pipeline needs to be reversely flushed.
● ***ooth operation, vibration and low noise.
●Simple structure, convenient disassembly and assembly.
main application:
Used in mining, paper making, printing and dyeing, environmental protection, graphite, mica, gold, ceramics, oil refining, petroleum, chemical, farm, salt field, iodine field, dyeing, brewing, food, fertilizer, coking plant, c***truction, marble factory, gold Mines, mud, quicksand, mud ponds, sewage ponds, sewage liquids can be used to pump sewage thick liquid, charging materials and suspended materials. It can also be used for coal mine drainage and fluids containing mud.
Precauti***:
Before starting the mud pump, please check if the inlet pipe and outlet pipe are blocked. If the bearing is filled with butter before and after, check if the packing is full. The mud pump should be equipped with a high-pressure clean water pump to transport the clean water larger than the mud pump pressure to the leak-proof packing to protect the packing. The mud pump should not be closed when the mud pump is working. Otherwise, the sealing part will wear quickly. Whether the gap between the impeller and the guard plate is reasonable has a great influence on the life of the mud pump. If the gap is unreasonable, vibration and noise will occur when the pump is running, and the overcurrent components will be damaged quickly. Therefore, when replacing the impeller, care should be taken to ensure that the clearance meets the requirements of the drawings. The clearance adjustment can be performed by adjusting the screws on the rear bearing body. The allowable suction stroke of the mud pump is measured when the clean water is delivered. The effect of the mud on the suction capacity should be c***idered when pumping the mud.