进口吸刮泥机泵/The mud scraper pump/德国巴赫
进口吸刮泥机泵,德国进口倡导品牌,德国进口***,德国进口匠心品牌,进口吸刮泥机泵
-哪个好-德国巴赫(BACH)
产品概述：
污泥处理不容忽视 ，行车式刮泥机解除清理池底之苦。
行车式刮吸泥机由行车、刮泥耙、撇渣板、驱动装置和自控柜等组成。行车式吸泥机按水流方向，可分为逆向刮泥逆向排渣和逆向刮泥同向排渣方式。刮泥机构在不刮泥回程时刮泥耙全部抬起。当回到刮泥的起始位置时，刮泥耙落下，从而形成行车式刮泥机的周而复始工作。
两槽同设一端：刮泥耙下降、撇渣板下降→刮泥机由池端(出水端)始点向泥、渣槽端行驶，将污泥、浮渣刮集输送直至终点(进水端)→刮泥耙上提、撇渣板上提→刮泥机终端向始端换向行驶→抵达始端后停机或进行行车式刮泥机的另一循环。
两槽分设两端：刮泥耙下降，撇渣板上提→刮泥机由出水端始点向泥槽端行驶.将污泥刮集输送直至终点→刮泥耙上提而撇渣板下降→刮泥机换向行驶将浮渣撇向浮渣槽→抵达始端后停机或进行行车式刮泥机的另一循环。
产品特点：
1，本机采用桁架结构，比传统结构重量大大减轻，选用热镀锌防腐工艺加工处理，可确保5年内不锈蚀，与水接触的部件使用304不锈钢制作，使用寿命大大加长。
2，维护量小，配用动力小运行费用低;选泵合理，运行平稳可靠。
3，新型的传动机构，避免两端行走误差。
4，行走轮为钢轮，保证了使用寿命
为便于吸泥机的正常运转，安装时必需使四个行走轮在矩形的两条平行边上。轨道钢必须在矩形的两条边上且在同一个水平面上。
为便于吸泥机的正常运转，安装时必需使四个行走轮在矩形的两条平行边上。轨道钢必须在矩形的两条边上且在同一个水平面上。
污泥和污水处理同等重要，如果污泥不妥善处置，就像污水不经处理直接排放一样。解决不好污泥的问题就不可能从根本上实现水环境的改善，污泥处理问题已经成为我们无法回避的城市环境问题。这款行车式刮吸泥机可用于污水处理厂、自来水厂平流沉淀将沉降在池底的污泥刮到泵吸泥口，通过泵吸行走边吸泥，然后将污泥排出池外，可以解除清理池底污泥之苦。
1. The machine adopts truss structure, which greatly reduces the weight of traditional structure. Hot-dip galvanizing and anti-corrosion technology is selected for processing, which can ensure stainless steel corrosion within 5 years. The parts in contact with water are made of 304 stainless steel, and the service life is greatly prolonged.
2. ***all maintenance, low running cost with power, reasonable pump selection, stable and reliable operation.
3. New type of tran***ission mechani*** to ***oid the errors of both ends.
4. Walking wheel is steel wheel, which ensures service life.
In order to facilitate the normal operation of the suction machine, it is necessary to install four tr***eling wheels on two parallel sides of the rectangle. Rail steel must be on both sides of the rectangle and on the same horizontal plane.
In order to facilitate the normal operation of the suction machine, it is necessary to install four tr***eling wheels on two parallel sides of the rectangle. Rail steel must be on both sides of the rectangle and on the same horizontal plane.
Sludge and sewage treatment are equally important. If sludge is not properly disposed of, it is just like sewage discharged directly without treatment. It is impossible to improve the water environment fundamentally if the sludge problem is not solved properly. The sludge treatment problem has become an un***oidable urban environmental problem. This tr***eling type scraper and suction machine can be used in sewage treatment plants and water works for horizontal sedimentation to scrape the sludge settled at the bottom of the pond to the suction port of the pump, suck the sludge while walking through the pump, and then discharge the sludge out of the pond, which can eliminate the suffering of cleaning the sludge at the bottom of the pond.
德国巴赫泵（BACH）泵业应用领域：
其业务广泛涉及水电、制浆造纸、金属行业、市政和工业领域的固/液分离以及动物饲料和生物质颗粒，并为上述各行业提供***的工厂、设备和服务。其它重要的业务领域还包括自动化和服务业务。
水和污水
- 灌溉和排水
- 饮用水和工业用水供应
- 废水处理
- 海水淡化工程
- 防洪（包括圩区排水）
火力发电
- 冷却水泵
- 脱硫
- 泵作水轮机发电
各种工业
- 制浆造纸
- 矿业
- 海上平台
- 制糖和生物乙醇
- 海水淡化
- 淀粉和食品行业
- 各种工业应用
德国巴赫泵（BACH）泵服务概览：
- ***人员的部署
- 安装和启动
- 检验
- 维修、检修、维护
- 由***进行的机器早期故障检测评估
- 咨询和更新改造
- 性能和振动测量
- 故障和损伤分析
- 可行性分析
- 泵和系统的能源分析
- 更新改造与修复
凭借多年的经验和***新的技术——为您找到***佳的解决方案
我们能通过以下方面让您的工厂达到***新的标准：
- 强大的研发专长，
- 创新方案和前瞻性产品，以及
- 世界各地训练有素的、高素质的、有经验的人员
享有声望的内部研发机构使我们总能在产品开发上***一步
- ***的和***的更新改造方案
- 完整的套餐-从工厂的计划到拆除
- 短暂的停机时间得益于协调良好的服务流程
- 减少维护和修理费用
The flow passage parts of the pump are made of stainless steel and engineering plastics, and the quotation of stainless steel magnetic pump is widely used in petroleum, chemical, pharmaceutical, electroplating, environmental protection, water treatment, national defense and other departments. It is an ideal equipment for transporting inflammable, explosive, toxic and precious liquids. It is a better choice for creating leak-free, pollution-free and civilized enterprises. Applicable temperature is - 30 - 130 degrees. 2. Functi*** of the Main Parts of Magnetic Pumps
1. Pump impeller: Hydraulic form conforms to API685 standard. It is the main characterization component of the hydraulic performance of the magnetic pump. Stainless steel magnetic pump, whose function is to force the liquid to rotate, so that the mechanical energy of the prime mover can be converted into liquid energy.
2. Pump shaft: It is an important part of bearing impeller and inner rotor and tran***itting torque.
3. Sliding bearings, sleeves and thrust discs: they are the supporting and positioning parts of the pump rotor system.
4. Internal and external rotors: The internal and external rotors are used together to form the magnetic tran***ission parts of the magnetic pump.
5. Isolation sleeve: Isolation sleeve is a component which can completely realize the advantage of no leakage of magnetic pump.