进口液压隔膜计量泵/Metering pump/德国巴赫
进口液压隔膜计量泵,德国进口倡导品牌,德国进口***,德国进口匠心品牌,进口液压隔膜计量泵-哪个好-德国巴赫(BACH)
产品概述：
1、密封，液压驱动隔膜，免维护
2、高精度进出口单向阀
3、内置可调压力放气安全阀，限位自动补油阀，确保计量精度。
4、双隔膜/带***报警功能。
5、PTFE材质隔膜、寿命≥8000小时；金属隔膜>5000小时
6、手动/自动/数字变频调节流量。
7、泵在运行和停止状态均可调节流量，精度&plu***n;1％
8、***大吸程4.5m水柱
9、介质温度：PTFE隔膜≤100℃，金属隔膜≤200℃
10、多种泵头材质可选：PVC、PTFE、PVDF、304、316L及20#合金、哈B、哈C等。
产品特点：
1、无动密封，无泄漏，维修简单；
2、工作压力可达30MPa,计量精度可达&plu***n;1%；
3、计量精度优于机械隔膜泵，密封性能优于柱塞泵；
4、流量大小控制通过调节冲程长度和变频调速来实现，配冲程调节器可以实现远程自动控制；
5、介质的使用温度不宜超过100℃，不宜低于-30℃，否则影响隔膜寿命；
6、新型的三阀结构，限位补油机构的应用，既保证液压腔内的液压油充满度，又避免补油过量，防止液压冲击，从而使隔膜两侧受力平衡，提高隔膜的使用寿命，隔膜寿命可提高8000h以上；
1. No dynamic seal, no leakage, simple maintenance;
2. The working pressure can reach 30 MPa and the measuring accuracy can reach (+1%).
3. Measuring accuracy is better than mechanical diaphragm pump and sealing performance is better than plunger pump.
4. Flow control can be realized by adjusting stroke length and variable frequency speed regulation. Distribution of stroke regulator can realize remote automatic control.
5. The service temperature of the medium should not exceed 100 C, and should not be lower than - 30 C. Otherwise, the service life of the diaphragm will be affected.
6. The new three-valve structure and the application of the limited filling mechani*** can not only ensure the hydraulic oil filling degree in the hydraulic chamber, but also ***oid the excessive filling oil and prevent the hydraulic impact, so as to balance the forces on both sides of the diaphragm, improve the service life of the diaphragm, and increase the service life of the diaphragm by more than 8000 hours.
德国巴赫泵（BACH）泵业应用领域：
其业务广泛涉及水电、制浆造纸、金属行业、市政和工业领域的固/液分离以及动物饲料和生物质颗粒，并为上述各行业提供***的工厂、设备和服务。其它重要的业务领域还包括自动化和服务业务。
水和污水
- 灌溉和排水
- 饮用水和工业用水供应
- 废水处理
- 海水淡化工程
- 防洪（包括圩区排水）
火力发电
- 冷却水泵
- 脱硫
- 泵作水轮机发电
各种工业
- 制浆造纸
- 矿业
- 海上平台
- 制糖和生物乙醇
- 海水淡化
- 淀粉和食品行业
- 各种工业应用
德国巴赫泵（BACH）泵服务概览：
- ***人员的部署
- 安装和启动
- 检验
- 维修、检修、维护
- 由***进行的机器早期故障检测评估
- 咨询和更新改造
- 性能和振动测量
- 故障和损伤分析
- 可行性分析
- 泵和系统的能源分析
- 更新改造与修复
凭借多年的经验和***新的技术——为您找到***佳的解决方案
我们能通过以下方面让您的工厂达到***新的标准：
- 强大的研发专长，
- 创新方案和前瞻性产品，以及
- 世界各地训练有素的、高素质的、有经验的人员
享有声望的内部研发机构使我们总能在产品开发上***一步
- ***的和***的更新改造方案
- 完整的套餐-从工厂的计划到拆除
- 短暂的停机时间得益于协调良好的服务流程
- 减少维护和修理费用
The flow passage parts of the pump are made of stainless steel and engineering plastics, and the quotation of stainless steel magnetic pump is widely used in petroleum, chemical, pharmaceutical, electroplating, environmental protection, water treatment, national defense and other departments. It is an ideal equipment for transporting inflammable, explosive, toxic and precious liquids. It is a better choice for creating leak-free, pollution-free and civilized enterprises. Applicable temperature is - 30 - 130 degrees. 2. Functi*** of the Main Parts of Magnetic Pumps
1. Pump impeller: Hydraulic form conforms to API685 standard. It is the main characterization component of the hydraulic performance of the magnetic pump. Stainless steel magnetic pump, whose function is to force the liquid to rotate, so that the mechanical energy of the prime mover can be converted into liquid energy.
2. Pump shaft: It is an important part of bearing impeller and inner rotor and tran***itting torque.
3. Sliding bearings, sleeves and thrust discs: they are the supporting and positioning parts of the pump rotor system.
4. Internal and external rotors: The internal and external rotors are used together to form the magnetic tran***ission parts of the magnetic pump.
5. Isolation sleeve: Isolation sleeve is a component which can completely realize the advantage of no leakage of magnetic pump.