进口卫生级离心泵/Centrifugal pump/德国品质
德国KAYSEN凯森进口卫生级离心泵概述
凯森卫生级离心式泵是一种***简单的设备件。其目的是为能量转换成速度或动能和压力被泵送的流体，然后进入一个电动马达或引擎。的能量发生变化的泵，叶轮和蜗壳分为两个主要部分。该叶轮的旋转驱动能量转换成动能的一部分。蜗壳是静止部分的动能转换成压力。凯森卫生级离心泵应用现代新技术和新概念不断革离心泵的生产工艺。新一代卫生级离心泵是德国KAYSEN凯森的骄傲。因为它除了符合GMP要求，传统的质量外。为用户提供的泵性能更好，效率更高，使用寿命更长，用户受益更大。
主要特点：
卫生级离心泵属于涡轮导流离心泵，可以在负压0.09Mpa压力下，抽取真空罐里的液体。在处理过程中满足卫生要求，柔和不损伤物料，并具抗化学物性能强光泵业所有与物料接触的部分均使用SUS304,SUS316L的材质。其标准配置包括外壳和泵脚。卫生级自吸泵是在标准离心泵基础上设计的高压泵，适用于高进口压力场合，可承受高达40bar 的进口压力。本泵是设计开式叶轮,内部镜面抛光、无死角、清洗后无滞留物、噪音低。
规 格：3T－180T, 0.75KW-75KW
材 质：SUS304 SUS316L (在材料的选用上泵体、泵盖、叶轮等凡与物料接触之零件由SUS316L或SUSI304不锈钢制造)
标 准：DIN、 ***S
叶 轮：分开式叶轮和半闭式叶轮。
表面处理：接液部分抛光，其余亚光或喷砂处理。
工作条件：卫生离心泵属高低液位几水平输送，有一定吸力。
***大进口压力：0.5MPa
温度范围：-10°C至+140°C(EPDM)
可冲洗机械密封：
水压：***高0.1MPa
水量：0.25-0.5L/min
主要优点：
●震动小
●噪音低
●性能好
●效率高
●寿命长
主要应用：
●化妆品：染料、酒精、香精油。
●***：输液、蒸馏水、高纯水、含颗粒（3-6毫米）的中药液体、浸出液。
●其他：糖果业、焙烤业、化工领域
●饮料：酒精、白酒、啤酒、麦芽汁、发酵液、果汁饮料、带颗粒饮料。
●乳品：乳清、奶油、牛奶、糖液等
Germany KAYSEN imported sanitary grade centrifugal pump overview
The Kayssen sanitary grade centrifugal pump is one of the simplest pieces of equipment. The purpose is to convert the energy into energy that is pumped by speed or kinetic energy and pressure, and then into an electric motor or engine. The pump, impeller and volute of the energy change are divided into two main parts. The rotational drive energy of the impeller is converted into a portion of kinetic energy. The volute of the volute is converted into pressure by the kinetic energy. Kaiser sanitary grade centrifugal pumps use modern new technologies and new concepts to continuously produce centrifugal pumps. The new generation of sanitary centrifugal pumps is the pride of Germany's KAYSEN. Because it is in addition to GMP requirements, the traditional quality. The pump performance for the user is better, the efficiency is higher, the service life is longer, and the user benefits more.
main feature:
The sanitary centrifugal pump belongs to the turbine diversion centrifugal pump, which can extract the liquid in the vacuum tank under the pressure of 0.09Mpa under negative pressure. It meets the hygienic requirements during the treatment process, softly does not damage the materials, and has chemical resistance. All the parts of the optical pump industry that are in contact with the materials are made of SUS304 and SUS316L. Its standard configuration includes the housing and pump feet. The sanitary self-priming pump is a high-pressure pump designed on the basis of a standard centrifugal pump. It is suitable for high inlet pressure applicati*** and can withstand inlet pressures up to 40 bar. The pump is designed as an open impeller with internal mirror polishing, no dead angle, no retentate after cleaning, and low noise.
Specificati***: 3T-180T, 0.75KW-75KW
Material: SUS304 SUS316L (In the material selection, the pump body, pump cover, impeller, etc. are made of SUS316L or SUSI304 stainless steel.)
Standard: DIN, ***S
Leaf wheel: split impeller and semi-closed impeller.
Surface treatment: the wetted part is polished, and the rest is matt or sandblasted.
Working conditi***: The sanitary centrifugal pump is delivered at a high level and a low level, and has a certain suction force.
Maximum inlet pressure: 0.5MPa
Temperature range: -10 ° C to +140 ° C (EPDM)
Flushable mechanical seal:
Water pressure: up to 0.1MPa
Water quantity: 0.25-0.5L/min
The main advantage:
●***all vibration
● low noise
●Good performance
●High efficiency
●Long life
main application:
● Co***etics: dyes, alcohol, essential oils.
● Drugs: infusion, distilled water, high-purity water, Chinese medicine liquid containing particles (3-6 mm), leachate.
●Others: Confectionery, Baking, Chemical Industry
● Beverages: alcohol, white spirits, beer, wort, fermentation broth, juice drinks, and granulated drinks.
● Dairy: whey, cream, milk, sugar, etc.