台湾全冠***C迷你型尼龙电缆接头

台湾全冠（***C）迷你型尼龙电缆接头

代理商：上海颐品自动化科技有限公司

Mini Cable Glands (B-Type)

Thread Type: Metric and PG.
?螺牙規格：公制牙 ( Metric / EN50262 ) 及 PG 牙。
?產品材質：A.C.F 部份以 UL 認可之尼龍 PA66 ***成 ( 防火等級 UL 94V-2 )，
B 及 D 部份採用標準 EPDM 戶外耐候橡膠，客戶亦可指定選擇 NBR ***械耐油橡膠。( 其他用途橡膠可接受****** )
?產品特性：本款***為精緻美觀的迷你型***纜固定***，其特殊B型設計的夾緊圈與夾緊爪，配合迫緊螺帽***構，其******固定抗拉力強，***密性***，並可持續性沉水。本產品全數通過 1000 小時抗 UV 耐候實驗且防水與抗拉功能不***。產品有耐酸鹼、耐化***物質與一般溶劑等抗腐蝕特性。本產品可針對微形儀器或空間小的***器、自動控制、******、供***、網路、連接器、***信或通訊、照明、***視器、音響視***、數位顯示、交通***誌、偵測與測量儀器等各式設備的出***，提供密封防水與固定抗拉的***佳技術與良器。
?工作溫度：-40℃ 至 100℃。 ( 產品規格與安規承認書、RoHS 聲明書均可於購買產品後要求索取 )
＊不附螺帽型：請於產品編***後加 -XA，***低******數量與價格另議。
　例：MGB12S-06B-ST-XA 為 MGB12S-06B-ST 之產品但不附螺帽（A部）。
Material Data: Halogen-free Nylon PA 66 (Flammability UL 94V-2 ) for A.C.F parts. (Contact EPIN for Flammability V0 material).
Weather-resistant EPDM rubbers for B.D parts. (NBR rubber is optional for oil-resistance applicati***).
***C black cable glands are suitable for outdoor use h***e been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.

IP Protection: IP68 - 5 bar.
Working Temp.: - 40°C to 105°C. Short-Term to 160°C.

Application: The ***allest & reined mini cable glands are made for tiny devices & equipment where the spaces are limited and the demands IP68 & strain relief are required for mounting ***all cable diameters. Due to their special designs, cable with a diameter from 1 mm to 6 mm can be mounted with only two mini cable gland sizes. ***C polyamide mini-type cable glands h***e the ***allest bodies with the best approved weather resistant, waterproof and strain relief abilities in outdoor / indoor cable entry applicati***, which are the best cord grip systems used for electrical and electronics technologies, solar PV modules, LED lights, trafic signals, surveillance cameras, measuring and sensor equipment.

* Contact EPIN for designing & ordering different sealing hole patterns. ( Sealing Inserts are not sold separately)
* ***C sealing inserts are ***ailable in split versi*** for mounting wires with pre-assembled terminals or connectors. ( Minimum order quantity is required)
* The Washer (Gasket) and Lock Nut are all included in each cable gland, this s***es additional ordering work and storage locati***.

上海颐品自动化科技有限公司-上海颐品自动化科技有限公司-上海颐品自动化科技有限公司 Seal Holes Thread . Cable Range mmØ Thread O.D. C1 mm Panel Mounting Hole mm Thread Length C2 mm Spanner Size A/F mm Body Min. I.D. mm Std. Pkg. pcs Sizes Black RAL 9005 Light Grey RAL 7035 Silver Grey RAL 7001 B Type M8x1.25 MGB8-02-ST B G SG 2.5 - 1 8 8 - 8.3 7.5 13/12 4.5 50 MGB8-04-ST B G SG 4.5-2.5 8 8 - 8.3 7.5 13/12 4.5 50 M10x1.5 MGB10-03-ST B G SG 3.1 - 1.5 10 10 - 10.3 8 15/13 6 50 MGB10-06-ST B G SG 6-3 10 10 - 10.3 8 15/13 6 50 M12x1.5 MGB12S-03-ST B G SG 3.1 - 1.5 12 12 - 12.3 8 18/13 6 50 MGB12S-06-ST B G SG 6-3 12 12 - 12.3 8 18/13 6 50   PG7 PGB7S-03 B G SG 3.1 - 1.5 12.5 12.5 - 12.8 8 17/ 13 6 50 PGB7S-06 B G SG 6-3 12.5 12.5 - 12.8 8 17/13 6 50