Metric Cable Glands (A-Type / Short Connection Thread)
上海颐品代理台湾全冠尼龙电缆接头（A型/短螺纹系列）
上海颐品自动化科技有限公司
‧螺牙規格：公制牙 ( Metric / EN50262 )，符合歐盟規範。
短螺紋適合接合於薄型***板的出***孔或是對應於附有內(攻)牙出***孔的設備，長螺紋適合接合於厚型***板的出***孔。
‧產品材質：A.C.E.F 部份以 UL 認可之尼龍 PA66 ***成 ( 防火等級 UL 94V-2 )，
B 及 D 部份採用標準 EPDM 戶外耐候橡膠，客戶亦可指定選擇 NBR ***械耐油橡膠。( 其他用途橡膠可接受****** )
‧產品特性：精密美觀的外型設計，以及特殊A型設計的夾緊圈與夾緊爪，配合能維持高扭力的防鬆迫緊螺帽***構，其******固定抗拉力特強，***密性***，並可持續性沉水 50 公尺。本產品全數通過 1000 小時抗 UV 耐候實驗且防水與抗拉功能不***。產品有耐酸鹼、耐化***物質與一般溶劑等抗腐蝕特性。***的產品尺寸能廣泛地應用於***器、自動控制、******、供***、網路、連接器、***信或通訊、照明、***視器、音響視***、數位顯示、交通***誌、偵測與測量儀器等各式設備的出***，提供密封防水與固定抗拉的***佳技術與良器。
‧工作溫度：-40℃ 至 100℃。 ( 產品規格與安規承認書、RoHS 聲明書均可於購買產品後要求索取 )
＊不附螺帽型：請於產品編***後加 -XA，***低******數量與價格另議。
例：MG20A-14B-XA 為 MG20A-14B 之產品但不附螺帽（A部）。
Thread Type: Metric, according to EN 60423.
Material Data: Halogen-free Nylon PA 66 (Flammability UL 94V-2) for A.C.E.F parts. (Contact us for Flammability V0 material).
Standard in weather-resistant EPDM rubbers for B.D parts. (NBR rubber is optional for oil-resistance applicati***).
***C black cable glands are suitable for outdoor use h***e been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.
IP Protection: IP68 - 5 bar.
Working Temp.: - 40°C to 105°C. Short-Term to 160°C.
Application: The reined polyamide cable gland with ***C’s special A-type clamping design provides strong strain relief & watertight performance over the entire cable range from their widest variety of sizes. Besides, ***C UL-certiied cable glands h***e the outstanding weather resistance and durability in outdoor / indoor cable entry applicati*** suitably used for electrical/electronics technologies and any kind of equipment.
* Contact EPIN for designing & ordering different sealing hole patterns with varying diameters. (Sealing Inserts are not sold separately)
* ***C sealing inserts are ***ailable in split versi*** for mounting wires with pre-assembled terminals or connectors. (Minimum order quantity is required)
* The Washer (Gasket) and Lock Nut are all included in each cable gland, this s***es additional ordering work and storage locati***.
| Seal Holes |
Thread | . | Cable Range mmØ |
Thread O.D. C1 mm |
Panel Mounting Hole mm |
Thread Length C2 mm |
Spanner Size A/F mm |
Std. Pkg. pcs |
|||
| Sizes | Black RAL 9005 |
Light Grey RAL 7035 |
Silver Grey RAL 7001 |
||||||||
A Type |
Short Connection Thread | ||||||||||
| M16x1.5 | MG16AS-05 | B | G | SG | 5.3-3 | 16 | 16-16.3 | 10 | 22/19 | 50 | |
| MG16AS-08 | B | G | SG | 7.8-4.5 | 16 | 16-16.3 | 10 | 22/19 | 50 | ||
| MG16A-10-ST | B | G | SG | 10-6 | 16 | 16-16.3 | 10 | 22/22 | 50 | ||
| MG16AL-11-ST | B | G | SG | 11-7 | 16 | 16-16.3 | 10 | 22/27 | 50 | ||
| M20x1.5 | MG20AS-06 | B | G | SG | 7-4 | 20 | 20-20.3 | 10 | 24/22 | 50 | |
| MG20AS-10 | B | G | SG | 10-6 | 20 | 20-20.3 | 10 | 24/22 | 50 | ||
| MG20A-10-ST | B | G | SG | 11-7 | 20 | 20-20.3 | 10 | 27/27 | 50 | ||
| MG20A-14-ST | B | G | SG | 14-9 | 20 | 20-20.3 | 10 | 27/27 | 50 | ||
| MG20AL-15-ST | B | G | SG | 14.7-11 | 20 | 20-20.3 | 10 | 27/33 | 50 | ||
| M25x1.5 | MG25AS-10 | B | G | SG | 11-7 | 25 | 25-25.4 | 12 | 33/27 | 50 | |
| MG25AS-14 | B | G | SG | 14-9 | 25 | 25-25.4 | 12 | 33/27 | 50 | ||
| MG25A-16-ST | B | G | SG | 16-12 | 25 | 25-25.4 | 10 | 33/33 | 50 | ||
| MG25A-18-ST | B | G | SG | 18-14 | 25 | 25-25.4 | 10 | 33/33 | 50 | ||
| MG25AL-19-ST | B | G | SG | 19-14.5 | 25 | 25-25.4 | 10 | 33/39 | 50 | ||
| M32x1.5 | MG32AS-16 | B | G | SG | 16-12 | 32 | 32-32.4 | 12 | 41/33 | 10 | |
| MG32AS-18 | B | G | SG | 18-14 | 32 | 32-32.4 | 12 | 41/33 | 10 | ||
| MG32A-22-ST | B | G | SG | 22-16 | 32 | 32-32.4 | 11 | 41/42 | 10 | ||
| MG32A-25-ST | B | G | SG | 25-18 | 32 | 32-32.4 | 11 | 41/42 | 10 | ||
| MG32AL-26-ST | B | G | SG | 26.3-21.5 | 32 | 32-32.4 | 10 | 41/45 | 10 | ||
| M40x1.5 | MG40A-25-ST | B | G | SG | 25-21 | 40 | 40-40.4 | 12 | 50/52 | 10 | |
| MG40A-30-ST | B | G | SG | 30-24 | 40 | 40-40.4 | 12 | 50/52 | 10 | ||
| M50x1.5 | MG50A-32-ST | B | G | SG | 32-26 | 50 | 50-50.4 | 15 | 62/62 | 10 | |
| MG50A-39-ST | B | G | SG | 41-31 | 50 | 50-50.4 | 15 | 62/62 | 10 | ||
| M63x1.5 | MG63A-46-ST | B | G | SG | 46-40 | 63 | 63-63.4 | 15 | 75/78 | 10 | |
| MG63A-49-ST | B | G | SG | 51-44 | 63 | 63-63.4 | 15 | 75/78 | 10 | ||
| Long Connection Thread | |||||||||||
| M12x1.5 | MG12A-05 | B | G | SG | 5.3-3 | 12 | 12-12.3 | 9 | 18/19 | 50 | |
| MG12A-08 | B | G | SG | 7.8-4.5 | 12 | 12-12.3 | 9 | 18/19 | 50 | ||
| M16x1.5 | MG16A-06 | B | G | SG | 7-4 | 16 | 16-16.3 | 15 | 22/22 | 50 | |
| MG16A-10 | B | G | SG | 10-6 | 16 | 16-16.3 | 15 | 22/22 | 50 | ||
| MG16AL-11 | B | G | SG | 11-7 | 16 | 16-16.3 | 15 | 22/27 | 50 | ||
| M20x1.5 | MG20AM-08 | B | G | SG | 8.8-5 | 20 | 20-20.3 | 15 | 24/24 | 50 | |
| MG20A-10 | B | G | SG | 11-7 | 20 | 20-20.3 | 15 | 27/27 | 50 | ||
| MG20AM-11 | B | G | SG | 12-7 | 20 | 20-20.3 | 15 | 24/24 | 50 | ||
| MG20A-14 | B | G | SG | 14-9 | 20 | 20-20.3 | 15 | 27/27 | 50 | ||
| MG20AL-15 | B | G | SG | 14.7-11 | 20 | 20-20.3 | 15 | 27/33 | 50 | ||
| M25x1.5 | MG25A-16 | B | G | SG | 16-12 | 25 | 25-25.4 | 15 | 33/33 | 50 | |
| MG25A-18 | B | G | SG | 18-14 | 25 | 25-25.4 | 15 | 33/33 | 50 | ||
| MG25AL-19 | B | G | SG | 19-14.5 | 25 | 25-25.4 | 15 | 33/39 | 50 | ||
| M32x1.5 | MG32A-22 | B | G | SG | 22-16 | 32 | 32-32.4 | 15 | 41/42 | 10 | |
| MG32A-25 | B | G | SG | 25-18 | 32 | 32-32.4 | 15 | 41/42 | 10 | ||
| MG32AL-26 | B | G | SG | 26.3-21.5 | 32 | 32-32.4 | 15 | 41/45 | 10 | ||
| M40x1.5 | MG40A-25 | B | G | SG | 25-21 | 40 | 40-40.4 | 20 | 50/52 | 10 | |
| MG40A-30 | B | G | SG | 30-24 | 40 | 40-40.4 | 20 | 50/52 | 10 | ||
| M50x1.5 | MG50A-32 | B | G | SG | 32-26 | 50 | 50-50.4 | 22 | 62/62 | 10 | |
| MG50A-39 | B | G | SG | 41-31 | 50 | 50-50.4 | 22 | 62/62 | 10 | ||
| M63x1.5 | MG63A-46 | B | G | SG | 46-40 | 63 | 63-63.4 | 25 | 75/78 | 10 | |
| MG63A-49 | B | G | SG | 51-44 | 63 | 63-63.4 | 25 | 75/78 | 10 | ||
| M75x2 | MG75A-56 | B | G | SG | 56-50 | 75 | 75-75.6 | 25 | 92/92 | 2 | |
| MG75A-66 | B | G | SG | 66-56 | 75 | 75-75.6 | 25 | 92/92 | 2 | ||
| ***0x2 | MG90A-68 | B | G | SG | 68-58 | 90 | 90-91 | 25 | 110/110 | 2 | |
| MG90A-77 | B | G | SG | 77-66 | 90 | 90-91 | 25 | 110/110 | 2 | ||
Metric Cable Glands (B-Type)
上海颐品代理台湾全冠尼龙电缆接头（B型系列）
上海颐品自动化科技有限公司
‧螺牙規格：公制牙 ( Metric / EN50262 )，符合歐盟規範。
短螺紋適合接合於薄型***板的出***孔或是對應於附有內(攻)牙出***孔的設備，長螺紋適合接合於厚型***板的出***孔。
‧產品材質：A.C.F 部份以 UL 認可之尼龍 PA66 ***成 ( 防火等級 UL 94V-2 )，
B 及 D 部份採用標準 EPDM 戶外耐候橡膠，客戶亦可指定選擇 NBR ***械耐油橡膠。( 其他用途橡膠可接受****** )
‧產品特性：精密美觀的外型設計，以及特殊B型設計的夾緊圈與夾緊爪，配合能維持高扭力的防鬆迫緊螺帽***構，其******固定抗拉 力特強，***密性***，並可持續性沉水 50 公尺。本產品全數通過 1000 小時抗 UV 耐候實驗且防水與抗拉功能不***。產品有耐酸鹼、耐化***物質與一般溶劑等抗腐蝕特性。***的產品尺寸能廣泛地應用於***器、自動控制、******、供***、網路、連接器、***信或通訊、照明、***視器、音響視***、數位顯示、交通***誌、偵測與測量儀器等各式設備的出***，提供密封防水與固定抗拉的***佳技術與良器。
‧工作溫度：-40℃ 至 100℃。 ( 產品規格與安規承認書、RoHS 聲明書均可於購買產品後要求索取 )
＊不附螺帽型：請於產品編***後加 -XA，***低******數量與價格另議。
例：MGB20-14B-XA 為 MGB20-14B 之產品但不附螺帽（A部）。
Thread Type: Metric, according to EN 60423.
Material Data: Halogen-free Nylon PA 66 (Flammability UL 94V-2) for A.C.F parts. (Contact us for Flammability V0 material).
Weather-resistant EPDM rubbers for B.D parts. (NBR rubber is optional for oil-resistance applicati***).
Our black cable glands are suitable for outdoor use h***e been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.
IP Protection: IP68 - 5 bar.
Working Temp.: - 40°C to 105°C. Short-Term to 160°C.
Application: The reined polyamide cable gland with ***C's special B-type clamping & sealing design has been proven its worth over the years providing strong strain relief & watertight performance over an entire cable range from their widest variety of body sizes & sealing inserts. Besides, ***C UL-certiied cable glands h***e outstanding weather resistance and durability in outdoor / indoor cable entry applicati*** which are suitably used for electrical and electronics technologies, machines, telecommunicati***, wireless networking ODUs, power supplies, switches, junction boxes, solar PV modules, inverters, lightings, displays, trafics, signals, surveillance cameras, measurings, sensors, plant engineerings, installati*** and any kind of equipment.
* Contact EPIN for designing & ordering different sealing hole patterns with varying diameters. (Sealing Inserts are not sold separately)
* ***C sealing inserts are ***ailable in split versi*** for mounting wires with pre-assembled terminals or connectors. (Minimum order quantity is required)
* The Washer (Gasket) and Lock Nut are all included in each cable gland, this s***es additional ordering work and storage locati***.
| Seal Holes |
Thread | . | Cable Range mmØ |
Thread O.D. C1 mm |
Panel Mounting Hole mm |
Thread Length C2 mm |
Spanner Size A/F mm |
Std. Pkg. pcs |
|||
| Sizes | Black RAL 9005 |
Light Grey RAL 7035 |
Silver Grey RAL 7001 |
||||||||
| B Type |
Short Connection Thread | ||||||||||
| M12x1.5 | MGB12-05-ST | B | G | SG | 5.5-3 | 12 | 12-12.3 | 8.5 | 18/15 | 50 | |
| MGB12-07-ST | B | G | SG | 6.8-4 | 12 | 12-12.3 | 8.5 | 18/15 | 50 | ||
| M16x1.5 | MGB16-07-ST | B | G | SG | 7-4 | 16 | 16-16.3 | 10 | 22/22 | 50 | |
| MGB16-10-ST | B | G | SG | 10.4-6.4 | 16 | 16-16.3 | 10 | 22/22 | 50 | ||
| M20x1.5 | MGB20M-08-ST | B | G | SG | 9-5 | 20 | 20-20.3 | 9.5 | 24/24 | 50 | |
| MGB20-10-ST | B | G | SG | 11-7 | 20 | 20-20.3 | 10 | 27/27 | 50 | ||
| MGB20M-12-ST | B | G | SG | 12.5-7 | 20 | 20-20.3 | 9.5 | 24/24 | 50 | ||
| MGB20-14-ST | B | G | SG | 14-8.5 | 20 | 20-20.3 | 10 | 27/27 | 50 | ||
| M25x1.5 | MGB25-16-ST | B | G | SG | 16-12 | 25 | 25-25.4 | 10 | 33/33 | 50 | |
| MGB25-18-ST | B | G | SG | 18-14 | 25 | 25-25.4 | 10 | 33/33 | 50 | ||
| M32x1.5 | MGB32-22-ST | B | G | SG | 22-16 | 32 | 32-32.4 | 10 | 41/42 | 10 | |
| MGB32-25-ST | B | G | SG | 25-18 | 32 | 32-32.4 | 10 | 41/42 | 10 | ||
| Long Connection Thread | |||||||||||
| M12x1.5 | MGB12L-05 | B | G | SG | 5.5-3 | 12 | 12-12.3 | 15 | 18/19 | 50 | |
| MGB12L-08 | B | G | SG | 8-4.5 | 12 | 12-12.3 | 15 | 18/19 | 50 | ||
| M16x1.5 | MGB16-07 | B | G | SG | 7-4 | 16 | 16-16.3 | 15 | 22/22 | 50 | |
| MGB16-10 | B | G | SG | 10.4-6.4 | 16 | 16-16.3 | 15 | 22/22 | 50 | ||
| M20x1.5 | MGB20M-08 | B | G | SG | 9-5 | 20 | 20-20.3 | 15 | 24/24 | 50 | |
| MGB20-10 | B | G | SG | 11-7 | 20 | 20-20.3 | 15 | 27/27 | 50 | ||
| MGB20M-12 | B | G | SG | 12.5-7 | 20 | 20-20.3 | 15 | 24/24 | 50 | ||
| MGB20M-13 | B | G | SG | 13-7 | 20 | 20-20.3 | 15 | 24/24 | 50 | ||
| MGB20-14 | B | G | SG | 14-8.5 | 20 | 20-20.3 | 15 | 27/27 | 50 | ||
| M25x1.5 | MGB25-16 | B | G | SG | 16-12 | 25 | 25-25.4 | 15 | 33/33 | 50 | |
| MGB25-18 | B | G | SG | 18-14 | 25 | 25-25.4 | 15 | 33/33 | 50 | ||
| M32x1.5 | MGB32-22 | B | G | SG | 22-16 | 32 | 32-32.4 | 15 | 41/42 | 10 | |
| MGB32-25 | B | G | SG | 25-18 | 32 | 32-32.4 | 15 | 41/42 | 10 | ||
| M40x1.5 | MGB40-25 | B | G | SG | 26.5-21 | 40 | 40-40.4 | 15 | 50/52 | 10 | |
| MGB40-30 | B | G | SG | 32-24 | 40 | 40-40.4 | 15 | 50/52 | 10 | ||
| M50x1.5 | MG***-32 | B | G | SG | 32-26 | 50 | 50-50.4 | 20 | 62/62 | 10 | |
| MG***-39 | B | G | SG | 41-31 | 50 | 50-50.4 | 20 | 62/62 | 10 | ||
| M63x1.5 | MGB63-46 | B | G | SG | 46-38 | 63 | 63-63.4 | 20 | 75/76 | 10 | |
| MGB63-49 | B | G | SG | 51-44 | 63 | 63-63.4 | 20 | 75/76 | 10 | ||