台湾全冠AVC尼龙电缆接头（A型/B型）
上海颐品自动化科技有限公司
PG Cable Glands (A & B-Type)
‧螺牙規格：PG 牙，符合歐盟規範。
‧產品材質：A.C.E.F 部份以 UL 認可之尼龍 PA66 製成 ( 防火等級 UL 94V-2 )，
B 及 D 部份採用標準 EPDM 戶外耐候橡膠，客戶亦可指定選擇 NBR 機械耐油橡膠。( 其他用途橡膠可接受訂製 )
‧產品特性：精密美觀的外型設計，以及特殊A型與B型設計的夾緊圈與夾緊爪，配合能維持高扭力的防鬆迫緊螺帽機構，其電線固定抗拉力特強，氣密性完美，並可持續性沉水 50 公尺。本產品全數通過 1000 小時抗 UV 耐候實驗且防水與抗拉功能不變。產品有耐酸鹼、耐化學物質與一般溶劑等抗腐蝕特性。全方位的產品尺寸能廣泛地應用於機器、自動控制、電氣、供電、網路、連接器、電信或通訊、照明、監視器、音響視聽、數位顯示、交通號誌、偵測與測量儀器等各式設備的出線，提供密封防水與固定抗拉的最佳技術與良器。
‧工作溫度：-40℃ 至 100℃。 ( 產品規格與安規承認書、RoHS 聲明書均可於購買產品後要求索取 )
＊不附螺帽型：請於產品編號後加 -XA，最低訂製數量與價格另議。
例：PGA16-14B-XA 為 PGA16-14B 之產品但不附螺帽（A部）。
Thread Type: PG, according to DIN 40430.
Material Data: Halogen-free Nylon PA 66 (Flammability UL 94V-2) for A.C.F parts. (Contact us for Flammability V0 material).
Weather-resistant EPDM rubbers for B.D parts. (NBR rubber is optional for oil-resistance applications).
AVC black cable glands are suitable for outdoor use have been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.
IP Protection: IP68 - 5 bar.
Working Temp.: - 40°C to 105°C. Short-Term to 160°C.
Application: The reined polyamide cable gland with AVC's special B-type clamping & sealing design has been proven its worth over the years providing strong strain relief & watertight performance over an entire cable range from their widest variety of body sizes & sealing inserts. Besides, AVC
UL-certiied cable glands have outstanding weather resistance and durability in outdoor / indoor cable entry applications which are suitably used for electrical and electronics technologies, machines, telecommunications, wireless networking ODUs, power supplies, switches, junction boxes, solar PV modules, inverters, lightings, displays, trafics, signals, surveillance cameras, measurings, sensors and any kind of equipment.
* Contact EPIN for designing & ordering different sealing hole patterns with varying diameters. (Sealing Inserts are not sold separately)
* AVC sealing inserts are available in split versions for mounting wires with pre-assembled terminals or connectors. (Minimum order quantity is required)
* The Washer (Gasket) and Lock Nut are all included in each cable gland, this saves additional ordering work and storage locations.
| Seal Holes |
Thread | . | Cable Range mmØ |
Thread O.D. C1 mm |
Panel Mounting Hole mm |
Thread Length C2 mm |
Spanner Size A/F mm |
Std. Pkg. pcs |
|||
| Sizes | Black RAL 9005 |
Light Grey RAL 7035 |
Silver Grey RAL 7001 |
||||||||
A Type |
PG 7 | PGA7-05 | B | G | SG | 5.3-3 | 12.5 | 12.5-12.8 | 8.5 | 17/19 | 50 |
| PGA7-08 | B | G | SG | 7.8-4.5 | 12.5 | 12.5-12.8 | 8.5 | 17/19 | 50 | ||
| PG 9 | PGA9-05 | B | G | SG | 5.3-3 | 15.2 | 15.2-15.5 | 9 | 22/19 | 50 | |
| PGA9-08 | B | G | SG | 7.8-4.5 | 15.2 | 15.2-15.5 | 9 | 22/19 | 50 | ||
| PGA9L-10 | B | G | SG | 10.2-6 | 15.2 | 15.2-15.5 | 10 | 22/22 | 50 | ||
| PG 11 | PGA11-06 | B | G | SG | 7-4 | 18.6 | 18.6-18.9 | 10 | 24/22 | 50 | |
| PGA11-10 | B | G | SG | 10-6 | 18.6 | 18.6-18.9 | 10 | 24/22 | 50 | ||
| PGA11L-14 | B | G | SG | 14-9 | 18.6 | 18.6-18.9 | 10 | 24/27 | 50 | ||
| PG 13.5 | PGA13.5-08 | B | G | SG | 8.8-5 | 20.4 | 20.4-20.7 | 10 | 27/24 | 50 | |
| PGA13.5-11 | B | G | SG | 12-7 | 20.4 | 20.4-20.7 | 10 | 27/24 | 50 | ||
| PGA13.5L-14 | B | G | SG | 14-9 | 20.4 | 20.4-20.7 | 10 | 27/27 | 50 | ||
| PG 16 | PGA16-10 | B | G | SG | 11-7 | 22.5 | 22.5-22.8 | 11 | 30/27 | 50 | |
| PGA16-14 | B | G | SG | 14-9 | 22.5 | 22.5-22.8 | 11 | 30/27 | 50 | ||
| PGA16L-16 | B | G | SG | 16-12 | 22.5 | 22.5-22.8 | 10 | 30/33 | 50 | ||
| PG 21 | PGA21-16 | B | G | SG | 16-12 | 28.3 | 28.3-28.7 | 12.5 | 36/33 | 50 | |
| PGA21-18 | B | G | SG | 18-14 | 28.3 | 28.3-28.7 | 12.5 | 36/33 | 50 | ||
| PGA21L-19 | B | G | SG | 19.5-14.5 | 28.3 | 28.3-28.7 | 12 | 36/39 | 50 | ||
| PG 29 | PGA29-22 | B | G | SG | 22-16 | 37 | 37-37.4 | 12 | 46/42 | 10 | |
| PGA29-25 | B | G | SG | 25-18 | 37 | 37-37.4 | 12 | 46/42 | 10 | ||
| PGA29L-27 | B | G | SG | 27-22 | 37 | 37-37.4 | 12 | 46/45 | 10 | ||
| PG 36 | PGA36-25 | B | G | SG | 25-21 | 47 | 47-47.4 | 15 | 57/52 | 10 | |
| PGA36-30 | B | G | SG | 30-24 | 47 | 47-47.4 | 15 | 57/52 | 10 | ||
| PG 48 | PGA48-46 | B | G | SG | 46-40 | 59.3 | 59.3-59.7 | 16 | 70/78 | 10 | |
| PGA48-49 | B | G | SG | 51-44 | 59.3 | 59.3-59.7 | 16 | 70/78 | 10 | ||
| B Type |
PG 7 | PGB7-05 | B | G | SG | 5.5-3 | 12.5 | 12.5-12.8 | 8 | 17/15 | 50 |
| PGB7-07 | B | G | SG | 6.8-4 | 12.5 | 12.5-12.8 | 8 | 17/15 | 50 | ||
| PG 9 | PGB9-05 | B | G | SG | 5.5-3 | 15.2 | 15.2-15.5 | 8.5 | 22/19 | 50 | |
| PGB9-09 | B | G | SG | 8-4.5 | 15.2 | 15.2-15.5 | 8.5 | 22/19 | 50 | ||
| PG 11 | PGB11-07 | B | G | SG | 7-4 | 18.6 | 18.6-18.9 | 9 | 24/22 | 50 | |
| PGB11-10 | B | G | SG | 10.4-6.4 | 18.6 | 18.6-18.9 | 9 | 24/22 | 50 | ||
| PG 13.5 | PGB13.5-08 | B | G | SG | 9-5 | 20.4 | 20.4-20.7 | 10 | 27/24 | 50 | |
| PGB13.5-12 | B | G | SG | 12.5-7 | 20.4 | 20.4-20.7 | 10 | 27/24 | 50 | ||
| PG 16 | PGB16-10 | B | G | SG | 11-7 | 22.5 | 22.5-22.8 | 10 | 30/27 | 50 | |
| PGB16-14 | B | G | SG | 14-8.5 | 22.5 | 22.5-22.8 | 10 | 30/27 | 50 | ||
| PG 21 | PGB21-16 | B | G | SG | 16-12 | 28.3 | 28.3-28.7 | 12 | 36/33 | 50 | |
| PGB21-18 | B | G | SG | 18-14 | 28.3 | 28.3-28.7 | 12 | 36/33 | 50 | ||
| PG 29 | PGB29-22 | B | G | SG | 22-16 | 37 | 37-37.4 | 15 | 46/42 | 10 | |
| PGB29-25 | B | G | SG | 25-18 | 37 | 37-37.4 | 15 | 46/42 | 10 | ||
| PG 36 | PGB36-25 | B | G | SG | 26.5-21 | 47 | 47-47.4 | 15 | 57/52 | 10 | |
| PGB36-30 | B | G | SG | 32-24 | 47 | 47-47.4 | 15 | 57/52 | 10 | ||
| PG 42 | PGB42-32 | B | G | SG | 32-26 | 54 | 54-54.4 | 15.5 | 64/62 | 10 | |
| PGB42-39 | B | G | SG | 41-31 | 54 | 54-54.4 | 15.5 | 64/62 | 10 | ||
| PG 48 | PGB48-38 | B | G | SG | 38-30 | 59.3 | 59.3-59.7 | 15.5 | 70/65 | 10 | |
| PGB48-45 | B | G | SG | 45-35 | 59.3 | 59.3-59.7 | 15.5 | 70/65 | 10 | ||
G(PF) Cable Glands (A & B-Type)
‧螺牙規格：G ( PF ) 牙 ，符合 ISO 與 JIS 平行螺紋管牙規範。( Parallel Threads for Pipes - ISO 228-1 )
‧產品材質：A.C.E.F 部份以 UL 認可之尼龍 PA66 製成 ( 防火等級 UL 94V-2 )，
B 及 D 部份採用標準 EPDM 戶外耐候橡膠，客戶亦可指定選擇 NBR 機械耐油橡膠。( 其他用途橡膠可接受訂製 )
‧產品特性：精密美觀的外型設計，以及特殊A型與B型設計的夾緊圈與夾緊爪，配合能維持高扭力的防鬆迫緊螺帽機構，其電線固定抗拉力特強，氣密性完美，並可持續性沉水 50 公尺。本產品全數通過 1000 小時抗 UV 耐候實驗且防水與抗拉功能不變。產品有耐酸鹼、耐化學物質與一般溶劑等抗腐蝕特性。全方位的產品尺寸能廣泛地應用於機器、自動控制、電氣、供電、網路、連接器、電信或通訊、照明、監視器、音響視聽、數位顯示、交通號誌、偵測與測量儀器等各式設備的出線，提供密封防水與固定抗拉的最佳技術與良器。
‧工作溫度：-40℃ 至 100℃。 ( 產品規格與安規承認書、RoHS 聲明書均可於購買產品後要求索取 )
＊不附螺帽型：請於產品編號後加 -XA，最低訂製數量與價格另議。
例：FGA21L-14B-XA 為 FGA21L-14B 之產品但不附螺帽（A部）。
Thread Type: G(PF), according to JIS B 0202.
Material Data: Halogen-free Nylon PA 66 (Flammability UL 94V-2) for A.C.E.F parts. (Contact us for Flammability V0 material).
Weather-resistant EPDM rubbers for B.D parts. (NBR rubber is optional for oil-resistance applications).
Our black cable glands are suitable for outdoor use have been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.
IP Protection: IP68 - 5 bar.
Working Temp.: - 40°C to 105°C. Short-Term to 160°C.
Application: The reined polyamide cable gland with AVC's special A-type clamping & sealing design has been proven its worth over the years providing strong strain relief & watertight performance over an entire cable range (2 mm - 77 mm) from their widest variety of body sizes & sealing inserts. Besides, AVC UL-certiied cable glands have outstanding weather resistance and durability in outdoor / indoor cable entry applications which are suitably used for electrical and electronics technologies, machines, wireless networking ODUs, solar PV modules and any kind of equipment.
* Contact EPIN for designing & ordering different sealing hole patterns with varying diameters. (Sealing Inserts are not sold separately)
* AVC sealing inserts are available in split versions for mounting wires with pre-assembled terminals or connectors. (Minimum order quantity is required)
* The Washer (Gasket) and Lock Nut are all included in each cable gland, this saves additional ordering work and storage locations.
| Seal Holes |
Thread | . | Cable Range mmØ |
Thread O.D. C1 mm |
Panel Mounting Hole mm |
Thread Length C2 mm |
Spanner Size A/F mm |
Std. Pkg. pcs |
||||
| Sizes | Black RAL 9005 |
Light Grey RAL 7035 |
Silver Grey RAL 7001 |
|||||||||
| A Type |
G(PF) | 1/4 | FGA13-05 | B | G | SG | 5.3-3 | 13.157 | 13.2-13.4 | 9 | 19/19 | 50 |
| FGA13-08 | B | G | SG | 7.8-4.5 | 13.157 | 13.2-13.4 | 9 | 19/19 | 50 | |||
| 3/8 | FGA17-06 | B | G | SG | 7-4 | 16.662 | 16.7-16.9 | 10 | 22/22 | 50 | ||
| FGA17-10 | B | G | SG | 10-6 | 16.662 | 16.7-16.9 | 10 | 22/22 | 50 | |||
| 1/2 | FGA21S-06 | B | G | SG | 7-4 | 20.955 | 21-21.2 | 10 | 27/22 | 50 | ||
| FGA21M-08 | B | G | SG | 8.8-5 | 20.955 | 21-21.2 | 10 | 27/24 | 50 | |||
| FGA21S-10 | B | G | SG | 10-6 | 20.955 | 21-21.2 | 10 | 27/22 | 50 | |||
| FGA21L-10 | B | G | SG | 11-7 | 20.955 | 21-21.2 | 10 | 27/27 | 50 | |||
| FGA21M-11 | B | G | SG | 12-7 | 20.955 | 21-21.2 | 10 | 27/24 | 50 | |||
| FGA21L-14 | B | G | SG | 14-9 | 20.955 | 21-21.2 | 10 | 27/27 | 50 | |||
| FGA21LL-15 | B | G | SG | 15-11 | 20.955 | 21-21.2 | 10 | 30/33 | 50 | |||
| 3/4 | FGA26S-10 | B | G | SG | 11-7 | 26.441 | 26.5-26.8 | 12 | 33/27 | 50 | ||
| FGA26S-14 | B | G | SG | 14-9 | 26.441 | 26.5-26.8 | 12 | 33/27 | 50 | |||
| FGA26-16 | B | G | SG | 16-12 | 26.441 | 26.5-26.8 | 12.5 | 33/33 | 50 | |||
| FGA26-18 | B | G | SG | 18-14 | 26.441 | 26.5-26.8 | 12.5 | 33/33 | 50 | |||
| FGA26L-19 | B | G | SG | 19.5-14.5 | 26.441 | 26.5-26.8 | 15 | 33/39 | 50 | |||
| 1 | FGA33S-16 | B | G | SG | 16-12 | 33.249 | 33.3-33.6 | 12 | 42/33 | 10 | ||
| FGA33S-18 | B | G | SG | 18-14 | 33.249 | 33.3-33.6 | 12 | 42/33 | 10 | |||
| FGA33-22 | B | G | SG | 22-16 | 33.249 | 33.3-33.6 | 15 | 42/42 | 10 | |||
| FGA33-25 | B | G | SG | 25-18 | 33.249 | 33.3-33.6 | 15 | 42/42 | 10 | |||
| FGA33L-27 | B | G | SG | 27-22 | 33.249 | 33.3-33.6 | 15 | 42/45 | 10 | |||
| 1 1/4 | FGA42-25 | B | G | SG | 25-21 | 41.91 | 42-42.3 | 15 | 53/52 | 10 | ||
| FGA42-30 | B | G | SG | 30-24 | 41.91 | 42-42.3 | 15 | 53/52 | 10 | |||
| 1 1/2 | FGA48-32 | B | G | SG | 32-26 | 47.803 | 48-48.4 | 20 | 57/62 | 10 | ||
| FGA48-39 | B | G | SG | 41-31 | 47.803 | 48-48.4 | 20 | 57/62 | 10 | |||
| 2 | FGA60-46 | B | G | SG | 46-40 | 59.614 | 60-60.4 | 20 | 70/76 | 10 | ||
| FGA60-49 | B | G | SG | 51-44 | 59.614 | 60-60.4 | 20 | 70/76 | 10 | |||
| 3 | FGA88-68 | B | G | SG | 68-58 | 87.884 | 88-89 | 25 | 110/110 | 2 | ||
| FGA88-77 | B | G | SG | 77-66 | 87.884 | 88-89 | 25 | 110/110 | 2 | |||
| B Type |
G(PF) | 1/4 | FGB13-05 | B | G | SG | 5.5-3 | 13.157 | 13.2-13.4 | 8 | 19/15 | 50 |
| FGB13-07 | B | G | SG | 6.8-4 | 13.157 | 13.2-13.4 | 8 | 19/15 | 50 | |||
| 3/8 | FGB17-07 | B | G | SG | 7-4 | 16.662 | 16.7-16.9 | 10 | 22/22 | 50 | ||
| FGB17-10 | B | G | SG | 10.4-6.4 | 16.662 | 16.7-16.9 | 10 | 22/22 | 50 | |||
| 1/2 | FGB21S-07 | B | G | SG | 7-4 | 20.955 | 21-21.2 | 10 | 27/22 | 50 | ||
| FGB21M-08 | B | G | SG | 9-5 | 20.955 | 21-21.2 | 10 | 27/24 | 50 | |||
| FGB21S-10 | B | G | SG | 10.4-6.4 | 20.955 | 21-21.2 | 10 | 27/22 | 50 | |||
| FGB21L-10 | B | G | SG | 11-7 | 20.955 | 21-21.2 | 12 | 27/27 | 50 | |||
| FGB21M-12 | B | G | SG | 12.5-7 | 20.955 | 21-21.2 | 10 | 27/24 | 50 | |||
| FGB21L-14 | B | G | SG | 14-8.5 | 20.955 | 21-21.2 | 12 | 27/27 | 50 | |||
| 3/4 | FGB26-16 | B | G | SG | 16-12 | 26.441 | 26.5-26.8 | 12 | 33/33 | 50 | ||
| FGB26-18 | B | G | SG | 18-14 | 26.441 | 26.5-26.8 | 12 | 33/33 | 50 | |||
| 1 | FGB33-22 | B | G | SG | 22-16 | 33.249 | 33.3-33.6 | 13.5 | 42/42 | 10 | ||
| FGB33-25 | B | G | SG | 25-18 | 33.249 | 33.3-33.6 | 13.5 | 42/42 | 10 | |||
| 1 1/4 | FGB42-25 | B | G | SG | 26.5-21 | 41.91 | 42-42.3 | 15 | 53/52 | 10 | ||
| FGB42-30 | B | G | SG | 32-24 | 41.91 | 42-42.3 | 15 | 53/52 | 10 | |||
NPT Cable Glands (A & B-Type)
‧螺牙規格：NPT 牙 ，符合美國標準錐形螺紋管牙規範。 ( National Pipe Thread Taper - ANSI B2.1 )
‧產品材質：C.E.F 部份以 UL 認可之尼龍 PA66 製成 ( 防火等級 UL 94V-2 )，
B 及 D 部份採用標準 EPDM 戶外耐候橡膠，客戶亦可指定選擇 NBR 機械耐油橡膠。( 其他用途橡膠可接受訂製 )
‧產品特性：精密美觀的外型設計，以及特殊A型與B型設計的夾緊圈與夾緊爪，配合能維持高扭力的防鬆迫緊螺帽機構，其電線固定抗拉力特強，氣密性完美，並可持續性沉水 50 公尺。本產品全數通過 1000 小時抗 UV 耐候實驗且防水與抗拉功能不變。產品有耐酸鹼、耐化學物質與一般溶劑等抗腐蝕特性。全方位的產品尺寸能廣泛地應用於機器、自動控制、電氣、供電、網路、連接器、電信或通訊、照明、監視器、音響視聽、數位顯示、交通號誌、偵測與測量儀器等各式設備的出線，提供密封防水與固定抗拉的最佳技術與良器。
‧工作溫度：-40℃ 至 100℃。 ( 產品規格與安規承認書、RoHS 聲明書均可於購買產品後要求索取 )
＊NPT牙產品不附螺帽，如需螺帽者可另外購買 P-LG-PF 螺帽系列搭配 ( 請參考本目錄第 230-3010 類 )。
Thread Type: NPT, according to ANSI B2.1.
Material Data: Halogen-free Nylon PA 66 (Flammability UL 94V-2) for A.C.E.F parts. (Contact us for Flammability V0 material).
Weather-resistant EPDM rubbers for B.D parts. (NBR rubber is optional for oil-resistance applications).
Our black cable glands are suitable for outdoor use have been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.
IP Protection: IP68 - 5 bar.
Working Temp.: - 40°C to 105°C. Short-Term to 160°C.
Application: The reined polyamide cable gland with AVC’s special A or B-type clamping & sealing design has been proven its worth over the years providing strong strain relief & watertight performance over an entire cable range from their wide variety of body sizes & sealing inserts. Besides, AVC UL-certiied cable glands have outstanding weather resistance and durability in outdoor / indoor cable entry applications which are suitably used for electrical and electronics technologies, machines, telecommunications, wireless networking ODUs, power supplies, switches, junction boxes, solar PV modules, inverters, lightings, displays, trafics, signals, surveillance cameras, measurings, sensors, plant engineerings, installations and any kind of equipment.
* Contact EPIN for designing & ordering different sealing hole patterns with varying diameters. (Sealing Inserts are not sold separately)
* AVC sealing inserts are available in split versions for mounting wires with pre-assembled terminals or connectors. (Minimum order quantity is required)
* The Washer (Gasket) and Lock Nut are all included in each cable gland, this saves additional ordering work and storage locations.
| Seal Holes |
Thread | . | Cable Range mmØ |
Thread O.D. C1 mm |
Thread Length C2 mm |
Spanner Size A/F mm |
Std. Pkg. pcs |
|||
| Sizes | Black RAL 9005 |
Light Grey RAL 7035 |
Silver Grey RAL 7001 |
|||||||
| A Type |
NPT 3/8 | NPA17-06 | B | G | SG | 7-4 | 17.055 | 13 | 22 | 50 |
| NPA17-10 | B | G | SG | 10-6 | 17.055 | 13 | 22 | 50 | ||
| NPT 1/2 | NPA21-10 | B | G | SG | 11-7 | 21.223 | 13 | 27 | 50 | |
| NPA21-14 | B | G | SG | 14-9 | 21.223 | 13 | 27 | 50 | ||
| NPT 3/4 | NPA26-16 | B | G | SG | 16-12 | 26.568 | 15 | 33 | 50 | |
| NPA26-18 | B | G | SG | 18-14 | 26.568 | 15 | 33 | 50 | ||
| NPT 1 | NPA33-22 | B | G | SG | 22-16 | 33.227 | 17 | 42 | 10 | |
| NPA33-25 | B | G | SG | 25-18 | 33.227 | 17 | 42 | 10 | ||
| B Type |
NPT 3/8 | NPB17-07 | B | G | SG | 7-4 | 17.055 | 15 | 22 | 50 |
| NPB17-10 | B | G | SG | 10.4-6.4 | 17.055 | 15 | 22 | 50 | ||
| NPT 1/2 | NPB21-10 | B | G | SG | 11-7 | 21.223 | 15 | 27 | 50 | |
| NPB21-14 | B | G | SG | 14-8.5 | 21.223 | 15 | 27 | 50 | ||
| NPT 3/4 | NPB26-16 | B | G | SG | 16-12 | 26.568 | 15 | 33 | 50 | |
| NPB26-18 | B | G | SG | 18-14 | 26.568 | 15 | 33 | 50 | ||
| NPT 1 | NPB33-22 | B | G | SG | 22-16 | 33.227 | 17 | 42 | 10 | |
| NPB33-25 | B | G | SG | 25-18 | 33.227 | 17 | 42 | 10 | ||
| NPT 1 1/4 | NPB42-25 | B | G | SG | 26.5-21 | 41.984 | 17 | 52 | 10 | |
| NPB42-30 | B | G | SG | 32-24 | 41.984 | 17 | 52 | 10 | ||
代理商：上海颐品自动化科技有限公司