ZestETM1低成本高性能千兆以太网TOE模块,板子支持 IPv4, UDP and TCP
ZestETM1 Gigabit Ethernet Module
The ZestETM1 is a low cost, compact module enabling high speed Gigabit Ethernet network connectivity in embedded devices. It acts as a bridge between a standard network port and familiar parallel and serial interfaces, offloading all networking tasks and allowing devices to communicate with the outside world without the need for spe***t knowledge of complex protocols.
Orange Tree's proprietary GigExpedite chip ("GigEx") is a TCP/IP Offload Engine (TOE) that handles all the Ethernet communicati*** protocols. This le***es the user device completely free for the user's application, and means the user doesn't h***e to know anything about Ethernet protocols. With the main processing engine implemented in TOE ha***are, sustained data rates over 100MBytes/sec are achieved.
The module ***all form factor (30mm x 25mm), low power c***umption (less than 1.5W), and straightforward interfaces simplify integration into end user systems, while its high performance removes bottlenecks in transferring data to and from remote devices. Supporting sustained transfer rates of 100MBytes/second, it can be used both for high data rate applicati***, or simply as a convenient way to add connectivity to lower bandwidth systems.
Support for real-time applicati*** includes Precision Time Protocol (IEEE1588 PTP) and Synchronous Ethernet (SyncE). PTP synchronises networked devices together providing a high resolution 'time of day' counter on each device. SyncE generates a synchronized 125MHz clock on all compatible devices.
The array of interfaces provided by ZestETM1 includes parallel registers, FIFO interfaces, SPI master and sl***e and UART ports, which simplifies connection to existing devices. A single power supply and low external component count minimise carrier board cost and area.
A breakout board is ***ailable to simplify evaluation of the module. The breakout board has an RJ45 connector and connects the user interface of the module to standard 0.1 inch connectors for easy connection to external devices.
Benefits
-
Low cost and easy to use with no detailed Ethernet networking knowledge required
-
Offers simple access to very fast data rates over Gigabit Ethernet without h***ing to integrate complex networking ha***are and software
-
Devices can communicate via Ethernet without using a processor or incurring processor overheads
-
Synchronisation across networked devices for real-time control and data acquisition without any extra ha***are or interconnect
-
Devices can build spe***ed application protocols on top of the base TCP and UDP support
-
Multiple standard interfaces reduce interfacing restricti*** and provide glueless connection to a wide variety of devices
Features
-
10/100/1000BASE-T Ethernet sustaining 100MBytes/second data transfer rates
-
Full offload of TCP and UDP data transfers
-
Flexible high speed data interface
-
Glueless direct connection
-
16 bit register-based CPU interface
-
8 bit register-based CPU interface
-
8 bit FIFO interface
-
-
SPI master interface to boot external processors
-
SPI sl***e interface for control by external processors
-
UART interface up to 921kbps
-
Support for ARP, IPv4, TCP, UDP, ICMP, IGMP, PTPv2 and HTTP protocols
-
Up to 16 simultaneous high speed Ethernet connecti***
-
Embedded web server with 256 KBytes of Flash for user web pages
-
IEEE1588 PTP version 2 synchronisation with trigger and 1 pulse-per-second outputs and event capture input
-
Synchronous Ethernet (SyncE) clock recovery
-
Single 3.3V supply voltage
-
User Interface voltage from 1.8V to 3.3V
-
Power c***umption less than 1.5W
-
Compact 25x30mm form factor
-
Industrial temperature range
-
Windows and Linux software support
-
Reference designs for when attached to an FPGA (including C, VHDL and Verilog source)