进口不锈钢磁力驱动离心泵/centrifugal pump/德国巴赫
产品概述：
通常由电动机，磁力偶合器和耐腐蚀离心泵组成。其主要特点是利用磁力偶合器传递动力，完全无泄漏，当电动机带动磁力偶合器的外磁钢旋转时，磁力线穿过间隙和隔离套，作用于内磁钢上，使泵转子与电动机同步旋转，无机械接触地传递扭矩。在泵轴的动力输入端，由于液体被封闭在静止的隔离套内，没有动密封因而完全无泄漏。泵的过流部件根据需要可分别采用3O4、3O4L、3O2、321、316、316L、UB6、CD4MCu、钛合金、镍基合金等耐腐蚀材料
Usually it c***ists of motor, magnetic coupling and corrosion resistant centrifugal pump. Its main feature is that the magnetic coupling is used to transfer power, without leakage. When the motor drives the outer magnetic steel of the magnetic coupling to rotate, the magnetic wire passes through the gap and isolation sleeve and acts on the inner magnetic steel, so that the pump rotor rotates synchronously with the motor and transfers the torque without mechanical contact. At the power input end of the pump shaft, there is no leakage because the liquid is enclosed in a static isolation sleeve without dynamic seal. The flow passage parts of the pump can be made of corrosion resistant materials such as 3O4, 3O4L, 3O 2, 321, 316, 316L, UB6, CD4MCu, titanium alloy and nickel-based alloy, respectively, as required.
用途：
磁力泵适用于石油、化工、制药、台炼、电镀、环保、食品、影视洗印、水处理、国防等行业，输送稀有贵重液和各种腐蚀性液体的理想设备。适用于输送***大系统工作压力1.6MPa，温度不超过1OO℃，密度不大于184Okg/m3，粘度不大于3Ocm2/S的不含硬颗粒和纤维的液体。系统工作压力若大于1.6MPa，则可进行特殊设计，***高系统工作压力可达15MPa。
The magnetic pump is suitable for petroleum, chemical industry, pharmacy, Taiwan refinery, electroplating, environmental protection, food, film and television printing, water treatment, national defense and other industries. It is an ideal equipment for transporting rare and precious liquids and various corrosive liquids. It is suitable for conveying liquids without hard particles and fibers with maximum system working pressure of 1.6 MPa, temperature not exceeding 1 OO C, density not exceeding 184 Okg/m3 and viscosity not exceeding 3 Ocm2/S. If the system working pressure is greater than 1.6 MPa, special design can be carried out. The maximum system working pressure can reach 15 MPa.