进口不锈钢潜水排污泵/Sewage pump/德国巴赫
进口不锈钢潜水排污泵（BACH）产品概述：
1不锈钢潜水排污泵采用大流道抗堵塞水力部件设计，大大提高污物通过能力，能有效地通过泵口径的5倍纤维物质和直径为泵口径约50%的固体颗粒。
2.设计合理，配套电机合理，效率高，节能效果显著。
3.机械密封采用双道串联密封，材质为硬质耐磨碳化钨，具有耐用、耐磨等特点。
4.泵结构紧凑，体积小，移动方便，安装简便，无需建泵房，潜入水中即可工作，大大减小工程造价。
5.泵油室内设有油水探头，当水泵侧机械密封损坏后，水进入油室，探头发生信号，对泵实施保护。
6.可根据用户需要配备全自动安全保护控制柜，对泵的漏水，漏电，过载及超温等进行监控，保证泵运行可靠安全。
7.双导轨自动耦合安装系统，给泵的安装的安装，维修带来了极大的方便，人可不必为此而进出污水坑。
8.浮球开关可根据所需的水位变化。自动控制泵的停启，无需专人看管。
1. The stainless steel submersible sewage pump is designed with large runner anti-clogging hydraulic components, which greatly improves the trafficability of sewage. It can effectively pass through five times the diameter of the pump and solid particles about 50% of the diameter of the pump.
2. The design is reasonable, the matching motor is reasonable, the efficiency is high and the energy-s***ing effect is remarkable.
3. Mechanical seals are made of hard wear-resistant tungsten carbide, and h***e the characteristics of durability and wear resistance.
4. The pump has compact structure, ***all volume, convenient movement, easy installation, no need to build a pump house, and can work under water, which greatly reduces the cost of the project.
5. The oil-water probe is installed in the oil chamber of the pump. When the mechanical seal of the pump side is damaged, the water enters the oil chamber and the probe generates signals to protect the pump.
6. Full-automatic safety protection control cabinet can be equipped according to the user's needs to monitor the leakage, leakage, overload and overtemperature of the pump, so as to ensure the reliable and safe operation of the pump.
7. The automatic coupling installation system of double guideways brings great convenience to the installation and maintenance of pumps. It is unnecessary for people to enter and le***e the sewage pit for this purpose.
8. The float switch can vary according to the required water level. The stop and start of the automatic control pump need not be supervised by a special person.
进口不锈钢潜水排污泵（BACH）结构特点：
不锈钢潜水排污泵由电机与泵两部分组成，二者通过油隔离室及机械密封组件隔开，属机电一体化产品，电机与泵合用同一轴(转子)整个水泵长度短，结构紧凑。配备多种保护装置，使得泵运行可靠，其主部件作用如下：
信号线：配备全保水泵控制柜，对泵实行***保护，包括漏水，断相、短路、过热、电机过载等项目.
电机定子：采用B级或F级绝缘。
漏水探头：该元件装在油室内，当机械密封损坏后，水进入油室，探头可发出信号由控制系统对泵实施保护。
机械密封：采用双道串联密封，选用新型硬质耐腐碳化钨材质，具有密封可靠、耐磨、寿命长等特点。
叶轮：叶轮采用单流道或双道结构，具有很强的通过能力，能够通过大的物料及纤维垃圾，减少堵塞、缠绕的故障。
泵体：与叶轮配用，使得泵具有高的效率。
密封环：装在泵体口环处，当叶轮因运行而使口环处磨损，可更换密封环，以保证泵以***佳效率运行。
Stainless steel submersible sewage pump is composed of motor and pump, which are separated by oil isolation chamber and mechanical seal assembly. It belongs to Mechatronics product. The whole pump with motor and pump is short in length and compact in structure. Equipped with a variety of protective devices, the pump runs reliably. Its main components function as follows:
Signal line: equipped with full water-retaining pump control cabinet, to implement all-round protection of the pump, including leakage, phase break, short circuit, overheating, motor overload and other items.
Motor stator: B or F insulation.
Leakage probe: The element is installed in the oil chamber. When the mechanical seal is damaged, water enters the oil chamber. The probe can send out signals to protect the pump by the control system.
Mechanical Seals: Double-way series seals and new type of hard corrosion-resistant tungsten carbide material are adopted, which h***e the characteristics of reliable seals, wear resistance and long service life.
Impeller: The impeller adopts single-channel or double-channel structure, which has strong passing capacity and can reduce blockage and winding failure through large materials and fibre garbage.
Pump body: with impeller, so that the pump has a high efficiency.
Sealing ring: Installed at the pump body orifice ring, when the impeller wears away at the orifice ring due to operation, the sealing ring can be replaced to ensure that the pump operates with the best efficiency.