进口单级单吸管道离心泵/centrifugal pump/德国巴赫
进口单级单吸管道离心泵（BACH）产品概述：
离心泵之性能参数，在一般立式泵的基础上进行巧妙组合设计而成。同时根据使用温度、介质等不同在立式管道离心泵基础上派出适用热水、高温、腐蚀性化工泵、油泵。该系列产品具有***节能、噪音低、性能可靠等优点。
The performance parameters of centrifugal pumps are ingeniously combined and designed on the basis of general vertical pumps. At the same time, according to the use of temperature, media and other differences in the vertical pipeline centrifugal pump on the basis of dispatching suitable hot water, high temperature, corrosive chemical pumps, oil pumps. This series of products h***e the advantages of high efficiency, energy s***ing, low noise and reliable performance.
进口单级单吸管道离心泵（BACH）工作条件:
吸入压力≤1.0MPa，或泵系统***高工作压力≤1.6MPa，即泵吸入口压力+泵扬程≤1.6MPa，泵静压试验压力为2.5MPa，订货时请注明系统工作压力。泵系统工作压力大于1.6MPa时应在订货时另行提出，以便在制造时管道离心泵的过流部分和联接部分采用铸钢材料。
环境温度<40℃，相对湿度<95％。
所输送介质中固体颗粒体积含量不超过单位体积的0.1％，粒度<0.2mm。
注：如使用介质为带有细小颗粒，请在订货时说明，以便厂家采用耐磨式机械密封。单级单吸管道离心泵，供输送清水及物理化学性质类似于清水的其他液体之用，适用于工业和城市给排水、高层建筑增压送水、园林喷灌、消防增压、远距离输送、暖通制冷循环、浴室等冷暖水循环增压及设备配套，使用温度T<80℃。
Inhalation pressure is less than 1.0 MPa, or the maximum working pressure of the pump system is less than 1.6 MPa, that is, the suction inlet pressure + pump head is less than 1.6 MPa, and the static pressure test pressure of the pump is 2.5 MPa. Please indicate the working pressure of the system when ordering. When the working pressure of the pump system is greater than 1.6 MPa, it should be put forward separately at the time of ordering, so that cast steel can be used in the flow passage and connection parts of the pipeline centrifugal pump during manufacture.
The ambient temperature was less than 40 C and the relative humidity was less than 95%.
The volume content of solid particles in the conveying medium is not more than 0.1% of the unit volume and the particle size is less than 0.2 mm.
Note: If the medium used is with fine particles, please specify when ordering, so that manufacturers can adopt wear-resistant mechanical seals. Single-stage single-suction pipeline centrifugal pump for transporting fresh water and other liquids similar in physical and chemical properties. It is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire fighting pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water cycle pressurization and equipment matching, using temperature T< 80 C.
进口单级单吸管道离心泵（BACH）产品优势：
单级单吸管道离心泵为立式结构，进出口口径相同，且位于同一中心线上，可象阀门一样安装于管路之中，外形紧凑美观，占地面积小，建筑投入低，如加上防护罩则可置于户外使用。
叶轮直接安装在电机的加长轴上，轴向尺寸短，结构紧凑，泵与电机轴承配置合理，能有效地平衡泵运转产生的径向和轴向负荷，从而保证了管道离心泵的运行平稳，振动小、噪音低。
轴封采用机械密封或机械密封组合，采用进口钛合金密封环、中型耐高温机械密封和采用硬质合金材质，耐磨密封，能有效地延长机械密封的使用寿命。
安装检修方便，无需拆动管道路系统，只要卸下泵联体座螺母即可抽出全部转子部件。
可根据使用要求即流量和扬程的需要采用泵的串、并联运行方式。
可根据管路布置的要求采用泵的竖式和横式安装。