进口管道排污泵/Sewage pump/德国巴赫
进口管道排污泵（欢迎选购）产品概述：
管道排污泵是依据管道增压泵的外形特点，泵体及叶轮结构完全和潜水排污泵设计原理性能参数一模一样,该管道排污泵产品是采用国内外***技术开发成功的一种***节能的排污泵产品，广泛应用于高层建筑、长距离管道增压送水或其他介质之用也属于管道增压泵，又可以输送含有颗粒纤维污水，管道泵还适用做疏水泵，过滤冲洗冷凝循环泵等用途。
Pipeline sewage pump is based on the shape characteristics of pipeline booster pump. The structure of pump body and impeller is exactly the same as the performance parameters of submersible sewage pump design principle. The product of pipeline sewage pump is a high-efficiency and energy-s***ing sewage pump developed successfully with advanced technology at home and abroad. It is widely used in high-rise buildings and long-distance pipeline boosting. The use of water supply or other media also belongs to the pipeline booster pump, and can transport sewage containing granular fibers. The pipeline pump is also suitable for the use of drainage pumps, filtration, flushing and condensation circulating pumps
进口管道排污泵（欢迎选购）主要用途:
1、用于企业单位废水排放。
2、城市污水处理厂排放系统。
3、住宅区的污水排水站。
4、地铁、地下室、人防系统排水站。
5、***、宾馆、高层建筑污水排放 。
6、市政工程、建筑工地中稀泥浆的排放。
1. Wastewater discharge from enterprises.
2. Discharge system of municipal sewage treatment plant.
3. Sewage drainage stati*** in residential areas.
4. Subway, basement and drainage station of civil air defense system.
5. Sewage discharge from hospitals, hotels and high-rise buildings.
6. Discharge of slurry from municipal works and c***truction sites.
进口管道排污泵（欢迎选购）
产品特点：
1、排污能力强，无堵塞。
2、设计合理，配套 电机功率小，节能效果显著。
3、采用耐磨的机械密封。
4、结构紧凑，移动方便，安装简单，无需建造泵房，减少工程造价。
5、能够在全扬程范围内运行，而保证电机不会超载。
6、进水口与出水口中心线在一直线上，可直接安装在管道的任何地方。
1. Strong drainage capacity, no blockage.
2. Reasonable design, ***all matching motor power and remarkable energy s***ing effect.
3. Use wear-resistant mechanical seals.
4. Compact structure, convenient movement, simple installation, no need to build pumping house, reduce project cost.
5. It can operate within the full lift range, and ensure that the motor will not overload.
6. The intake and outlet centerlines are in a straight line and can be installed directly anywhere in the pipeline.
产品使用条件：
1、输送的介质温度不超过80摄氏度。
2、输送的介质重度为1～1.3Kg/dm3。
3、该泵的材料主要为铸铁，不能用于输送高度腐蚀液体。
4、水泵工作时，泵的周围应通风良好。
5、1Cr18Ni9Ti不锈钢材质可用于输送各种腐蚀液体。