贺德克液压油滤芯
液压油滤芯具有过滤精度高、纳污量大、使用更换方便等特点。使用贺德克滤芯可使系统快速达到并维持期望的油液清洁水平，并且可延长油液的使用寿命和减少轴承磨损。贺德克滤芯是本公司生产与技术研发部经过对国外进口贺德克滤芯的长期研究而精心设计的替代产品，完全符合***倡导的进口设备及零部件国产化的实施标准。滤芯完全使用进口滤材制成，贺德克替代滤芯的性能参数达到国外同类滤芯的水平，完全可以替代贺德克HYDAC滤芯使用。贺德克液压滤芯的产品应用：
电子及制药：贺德克替代滤芯广泛应用与反渗透水、去离子水的预处理过滤，洗净液及葡萄糖的前处理过滤。
冶金：贺德克替代滤芯广泛应用与轧钢机、连铸机液压系统的过滤及各种润滑设备的过滤
机械加工设备：贺德克替代滤芯广泛应用与造纸机械、矿业机械、注塑机及大型精密机械的润滑系统和压缩空气的净化，***加工设备及喷涂设备的粉尘回收过滤
石化：贺德克滤芯广泛应用与炼油、化工生产过程中的产品的分离及回收，液体净化、磁带、光盘及摄影胶片在制造过程中的净化，油田注井水及***除尘颗粒过滤。贺德克油过滤芯技术条件：
1)滤芯耐压：21MPa
2)2)工作温度：－10～ 100℃
3)过滤精度：20μm
4.)工作介质：一般液压油、***液压油、乳化液、水-乙二
HYDAC贺德克滤芯产品滤芯型号
D系列：
0030D系列 0060D系列 0110D系列 0140D系列 0160D系列
0240D系列 0280D系列 0330D系列 0500D系列 0660D系列
0990D系列 1320D系列
R系列：
0030R系列 0060R系列 0110R系列 0160R系列 0240R系列
0330R系列 0500R系列 0660R系列 0850R系列 0950R系列
1300R系列 1700R系列 2600R系列
DN系列：
0040DN系列 0063DN系列 0100DN系列 0160DN系列
0250DN系列 0400DN系列 0630DN系列 1000DN系列
RN系列：
0040RN系列 0063RN系列 0100RN系列 0160RN系列
0250RN系列 0400RN系列 0630RN系列 Fluid Management
Package concept for all aspects of fluid and components.
By entering into a full-service or maintenance contract, you will receive a coordinated package of services – from the supply of media and components, through engineering to hydraulics and facility services that are geared towa*** the following objectives: s***ings in maintenance costs, s***ings in investments and labour cost optimization. Fluid engineering means an increase in process reliability, taking proven technologies into account.
Technical services
With regard to specificati***, spare parts, repair, maintenance and optimisation of oils, water, lubrication, cooling lubricants and air. We analyze your production and servicing workflow from the technical and commercial point of view of fluid power technology and make a critical analysis of existing concepts and cost accounting. In this way, we move from the individual examination of the medium or component to a holistic approach.
From the idea to the implementation. An idea alone is not a guarantee for success. The HYDAC Service Centre ‘accompanies’ you in every step of the implementation. Fluid engineering is a dynamic process that must be continuously monitored for its suitability. Here, you can rely on the HYDAC Service Centre with a team made up of fluid managers, team leaders and service staff.
Optimisation and Planning
Increasing operational ***ailability and productivity.
Technical progress waits for no-one. In many applicati***, machines purchased today can no longer produce the quality required tomorrow. Instead of buying new, an excellent alternative, both technically and in terms of cost, is often to convert and modernize the components and systems used.
By examining the hydraulic system in partnership, we can find potential for optimisation together. In other wo***, we can generate a reduction in costs and an increase in productivity and operational ***ailability, with results to match.
Condition Monitoring
CM-Expert is a high-performance monitoring / archival and control system for Condition Monitoring which can be installed on any standard PC.
Its decentralized configuration makes the system extremely reliable and flexible for use in production systems. As rega*** connecting sensors, operating and signal components, control tasks and data exchange with other
systems, by using the data acquisition unit (MDE), no limits are placed on the system. All common physical parameters can be recorded by the MDE and processed by the CM-Expert: temperature, pressure, differential pressure, viscosity, water content, particles, flow rate, etc.
Areas of application:
Steel works
Wind turbines
Plastics machinery
Paper machines
Machine tools
Hydraulic presses
Test stands and all other production processes requiring monitoring
Online Monitoring of production systems. Directly on-site or via remote access! Our ‘remote’ version of the CM-Expert is perfectly applicable to wind energy, offshore applicati*** and mobile hydraulics. It informs the operator in real time about the condition of their system and initiates service exactly when it is needed. Unnecessary (and thus expensive) maintenance has now become obsolete!
Your advantages:
Continual monitoring and logging of the ambient conditi*** and the automated messages from the production media when defined service limits are reached (e.g. filter change)
Immediate warning when defined limits are exceeded
***oids unnecessary maintenance on systems where access is difficult
Prevention of major breakdowns by means of early detection
Optimisation of the maintenance intervals
Reduction of the maintenance and repair costs
Prevention of downtime
Prevention of c***equential damage.
Calibration
Optimise the quality of your test equipment by using the calibration service at HYDAC Service Centre.
In order to guarantee that all the test equipment measure accurately under controlled parameters, they must be calibrated regularly with the calibration process traceable to national measurement standa***, and the results documented and certified.
We calibrate the following equipment: CS and FCU (1000 and 2000 series).
Fluid Analytics
The condition of the fluid is crucial for optimum machine performance today. This means that the fluids must be monitored and tested.
Tests required:
Oil analysis
Cleanliness determination and analysis, internal company standa*** for the automotive and supplier industryParticle distribution measurement acc. ISO 4406 and SAE AS: 4056
Determination of water content according to the Karl Fischer method
Microscopic analysis
Gr***imetric analysis
Granulometric analysis
Density
Viscosity
TAN (Total Acid Number)
Coolant / lubricant analysis and water analysis (pH-value, conductivity, bacteria, chlorite, nitrate, nitrite, ° dH)
REM/EDX analyses
Process chain analysis
Process Optimisation
HYDAC can bring its many years of experience in the fluid industry to your production, performing on-site process chain analyses.
Process chain analyses define the state of technical cleanliness in the production process. We locate your potential for optimisation and develop measures to further improve component cleanliness values.
Technical Cleanliness
From a clean component to a technically clean system.
Technical cleanliness is becoming increasingly important in many sectors of industry, the automotive industry, mobile hydraulics and production systems. Phrases such as ‘reduction and ***oidance of start-up breakdowns’ and the difficulty of ever-increasing warranty periods are driving the demands for component cleanliness.
Suppliers and producers of complete systems are required to meet more demanding technical cleanliness standa*** for their products and systems.
We perform lab analyses as well as internal company standa***, and perform site process chain analyses.
Rental Service
Hire the equipment as you need it. Instead of tying up capital unnecessarily.
When equipment is only required for short periods, there is understandable opposition to making any costly investment.
Hiring the equipment is an economical and flexible alternative.
Whenever you need a piece of equipment, a measuring unit or a mobile filtration system – it’s there ready for you! All units are maintained and checked regularly and are therefore always ready for operation.
Our spe***ts will be pleased to advise you in advance on selecting the best unit for your application. We will ensure that the hire equipment will be ***ailable on schedule, and therefore that your project runs ***oothly.
Dewatering systems
Flushing units
Filtration units
Nitrogen service units
FPU Assembly units
Bending machines
Flanging machines
Measurement devices