|
HabaFLOW Product Data Sheet F-5EIWT |
|
Product Designation
 |
|
| Product Group: | TPU food conveyor and processing belts |
| Product Sub-Group: | Food conveyor belts |
| Main Industry Segments: | Bakery (biscuit/cookie); Chemical industry; Chocolate/confectionery; Dough production; Food conveying/processing in general; Food unwrapped/open |
| Belt Applications: | Discharging belt; General conveying belt; Packaging belt; Transfer belt |
| Special Features: | Easy release property; Longitudinal flexibility and transversal stability; No stick-slip effect |
| Mode of Use/Conveyance: | Horizontal |
Product Design (enlarged)
Product Construction/Design
|
|
|
|
|
|
Conveying Side (Material): |
Polyester (PET) fabric |
|
|
Conveying Side (Surface): |
Impregnated fabric |
|
|
Conveying Side (Property): |
Non-adhesive |
|
|
Conveying Side (Color): |
White |
|
|
Traction Layer (Material): |
Polyester (PET) fabric |
|
|
Number of Fabrics: |
2 |
|
|
Running Side/Pulley Side (Material): |
Polyester (PET) fabric |
|
|
Running Side/Pulley Side (Surface): |
Impregnated fabric |
|
|
Running Side/Pulley Side (Color): |
White |
Product Characteristics
|
|
|
| Slider bed suitable: |
Yes |
| Carrying rollers suitable: |
Yes |
| Troughed installation suitable: |
No |
| Power turns, curved installations: |
No |
| Nosebar suitable: |
Yes |
| Low noise applications: |
No |
| Antistatically equipped: |
Yes |
| Metal detector suitable: |
Yes |
| Flammability: |
No specific flammability prevention property |
| Food suitability FDA: |
Yes - acc. to 21CFR parts 170 - 199. Contact your Habasit representative for detailed information. |
| Food suitability USDA: |
No use intended |
| Food suitability EU: |
Yes - acc. to Regulation (EC) No. 1935/2004 and Directive 2002/72/EC as amended. Contact your Habasit representative for detailed information. |
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Technical Data
|
|
|
|
|
|
| Thickness: |
1.1 |
mm |
0.04 |
in. |
| Mass of belt (belt weight): |
1.0 |
kg/m2 |
0.2 |
lbs./sq.ft |
| Nosebar Radius (minimum): |
2 |
mm |
0.08 |
in. |
| Pulley diameter (minimum): |
15 |
mm |
0.6 |
in. |
| Pulley diameter minimum with counter flection: |
20 |
mm |
0.8 |
in. |
| Tensile force for 1% elongation (k1% static) per unit of width (Habasit standard SOP3-064): |
8.5 |
N/mm |
49 |
lbs./in. |
| Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181): |
6 |
N/mm |
34 |
lbs./in. |
| Admissible tensile force per unit of width: |
12 |
N/mm |
69 |
lbs./in. |
| Operating temperature admissible (continuous): |
Min -10 Max 70 |
°C °C |
Min 14 Max 158 |
°F °F |
| Coefficient of friction of driving pulley of steel: |
0.15 |
[-] |
0.15 |
[-] |
| Coefficient of friction of driving pulley with friction cover: |
0.4 |
[-] |
0.4 |
[-] |
| Coefficient of friction on slider bed of pickled steel sheet: |
0.20 |
[-] |
0.2 |
[-] |
| Coefficient of friction on slider bed of stainless steel sheet: |
0.15 |
[-] |
0.15 |
[-] |
| Seamless manufacturing width: |
4000 |
mm |
157 |
in. |
| On request other seamless manufacturing width: |
NA |
mm |
NA |
in. |
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Chemical Resistance
|
|
|
| Chemical Resistance Class: | 6 (for details, see separate overview) |
| Remark: |
These indications are not guarantees of properties. |
| Resistant to: |
All solids; Dirt; Dryness; Humidity; Putrefaction |
| Limited resistance to: |
None |
| Not resistant to: |
Caustic Soda > 10%; Hydrochloric acid > 20%; Sodium hypochlorite/javelle water; Sulphuric acid > 50% |
Calculations
|
|
|
For most applications calculation is not required. Should you still need a calculation: please ask Habasit. |
Installation and Handling Instructions
|
|
|
Do not go below initial elongation (epsilon) ~ 0.3%; Install the slack belt and tension until running perfectly under the full belt load. |
Storage
|
|
|
For details consult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. |
Joining System
|
|
|
| Master Joining Method: |
Flexproof 20 x 80 |
| Remarks: |
Master joining method for standard applications |
| Link to Joining Data Sheet |
|
|
|
| Alternative Joining Method: |
Flexproof 10 x 80 |
| Remarks: |
Master joining method for nosebar / high stress applications |
| Link to Joining Data Sheet |
|
|
|
| Alternative Joining Method: |
Thermofix |
| Remarks: |
Optional joining method |
|
|
|
| Alternative Joining Method: |
Clipper UCM-36 XSP |
| Remarks: |
Optional joining method |
Limitations
|
|
|
Not suitable for wet operations combined with increased temperatures; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s analysis in the respective environment. |
Legend
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
|
|
|
| * |
No calculation Value |
| 2) |
Product containing different coating materials such as elastomer‚ natural fibers‚ silicones‚ etc.‚ are not subject to the directive 2002/72/EC |
| 3) |
CLA: Coordination of the centre line-average value Ra (in the US also Arithmetical Average (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal. |
| 8) |
Due to high coefficient of friction of running/pulley side‚ the suitability for use on slider beds is limited |
| BfR |
German federal institute for risk assessment (Bundesinstitut fuer Risikobewertung) |
| EEC |
European Economic Community |
| EU |
European Union (Directive 2002/72/EC) |
| FDA |
Food and Drug Administration |
| NA |
Not available |
| NAP |
Not applicable |
|
USDA
瑞士Habasit总公司成立于1946年，为专业化学合成传动带及输送带制造商。Habasit的技术研发小组，除了在公司既 有的产品在线持续研究之外,更以不断创新的概念在市场上推陈出新。Habasit的专业形象及服务质量，长久以来 受到广大客户的认同，并在业界取得全球领先的地位。 瑞士Habasit集团目前于全球共有19个分支机构，与一百多个销售据点，以持续提供客户最高质量的产品、最专业的技术、与最好的服务。
瑞士Habasit 的生产中心分布于瑞士总部、意大利、美国、及印度．提供的产品有传动皮带、输送皮带、圆带、模块式网带、加工工具、锭带、无接缝皮带、不织布输送带、耐高温带、印花导带、PU齿形带、及各式特殊带。 提供客户全方位的专业服务是Habasit 长久以来坚持的理念，因此，我们发展了一套应用行业发展策略(SBU-strategic business unit)，针对各个行业领域，提供Habasit 的专业建议，以期与客户共同成长。
瑞士habasit提供的服务项目：
大陆地区
技术选型电话：13391350298 销 售 热 线：13774455550 程先生 上海科动传动系统有限公司 电 话： 86-021-60481210 传 真： 86-021-59774515 联系人：程亮（技术部）13774455550 E- mail: habasit@ http:/// http:// http://www.habasit./ 地址：上海市青浦区新凤中路1743号
|
United States Department of Agriculture (Food Safety and Inspection Service‚ Washington D.C.)
|
