日本油墨PPS FZ1140---DIC.PPS It is a kind of composite material filled with fiber reinforced materials such as glass fiber and inorganic filler. It is a typical engineering plastic with excellent .stability, high mechanical properties and heat resistance.
DIC.PPS There are two main types. One is based on a cross-linked polymer, which maintains high rigidity even in the high temperature range and is a favorable type of creep resistance. Other types are based on linear polymers with elongation and toughness. In addition, due to the high purity of linear polymers, they absorb less water than cross-linked polymers at high temperature and high humidity.
DIC.PPS It can be said that it is an advanced engineering plastic which is easy for designers and molding personnel to use.
■ can be operated at 200 ° C or
Heat resistance for continuous use at higher temperatures
The resin has high rigidity and strength retention in a wide temperature range and UL V-0 flame retardancy
DIC.PPS There are two main types. One is based on a cross-linked polymer, which maintains high rigidity even in the high temperature range and is a favorable type of creep resistance. Other types are based on linear polymers with elongation and toughness. In addition, due to the high purity of linear polymers, they absorb less water than cross-linked polymers at high temperature and high humidity.
DIC.PPS It can be said that it is an advanced engineering plastic which is easy for designers and molding personnel to use.
■ can be operated at 200 ° C or
Heat resistance for continuous use at higher temperatures
The resin has high rigidity and strength retention in a wide temperature range and UL V-0 flame retardancy
Chemical resistance of fluororesin
| 日本油墨PPS FZ1140--物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 比重 | 1.66 | g/cm³ | ASTM D792 |
| 收缩率 | ASTM D955 | ||
| 流动 | 0.25 | % | ASTM D955 |
| 横向流动 | 1.1 | % | ASTM D955 |
| 吸水率 (23°C, 24 hr) | 0.020 | % | ASTM D570 |
| 硬度 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 洛氏硬度 | ASTM D785 | ||
| M 级 | 100 | ASTM D785 | |
| R 级 | 121 | ASTM D785 |
| 500 | J/m | ASTM D256 |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 载荷下热变形温度 (1.8 MPa, 未退火) | 265 | °C | ASTM D648 |
| 线形热膨胀系数 | ASTM D696 | ||
| 流动 : -30 到 90°C | 2.2E-5 | cm/cm/°C | ASTM D696 |
| 横向 : -30 到 90°C | 2.2E-5 | cm/cm/°C | ASTM D696 |