Main features:
主要特点
A vertical vacuum quenching furnace with a sealed liquid storage tank
是一款立式真空淬火炉，配有一个密封的储液罐;
Samples can be quenched in vacuum or atmosphere, from the highest temperature of 1400 degrees into ice water or oil, to a large extent reduce the oxidation and deformation of the sample, suitable for various metal samples quenching
可在真空或气氛环境下对各种样件进行淬火，从***高温度1400度快速落入冰水或油中，很大程
度上减少了样件的氧化和形变，适用于各种金属样件的淬火
Technical Parameters
技术参数
|
Power 输入电源 |
Power rated: 8KW 额定功率：8KW |
|
Voltage 电压 |
Voltage rated: AC220V 50/60HZ 额定电压： AC220V 50/60HZ |
|
Working Temperature 工作温度 |
Max. Temperature: 1400℃( 1 hr) ***高温度：1400℃ (1小时) Continuous working temperature: ≤1300℃ 持续工作温度：≤1300℃ Recommended heating Rate: ≤10℃/min 推荐升温速率：≤10℃/分 |
|
Temperature Controller 控温方式 |
PID automatic control and auto-tune function. 模糊PID控制和自整定调节 30 programmable segments for precise thermal processing. 智能化30段可编程控制 Built-in protection for the over-heated and broken thermocouple. 超温和断偶报警功能 HMI plus PLC Control 10 inch LCD screen Control 人机界面加PLC控制，10寸液晶屏控制 |
|
Length of heating zone 加热区长度 |
320mm |
|
Heating Elements 加热元件 |
Silicon carbon rod 硅碳棒 |
|
Temperature Accuracy 控温精度 |
+/- 1℃ |
|
Processing tube 炉管 |
Tube size：Φ80*1200mm(optional） 炉管尺寸：Φ80*1200mm Two ceramic tube blocks are included for blocking heat radiation generated from tube center, must be fully inserted into the furnace chamber before heating 两个氧化铝管堵阻挡管中心产生的热辐射，必须在加热前塞进炉膛的正确位置 |
|
Liquid storage tank 储液罐 |
Size: Height 350mm, diameter ≥150mm 尺寸：高度350mm，直径≥150mm Material:stainless steel 304 材质：304不锈钢材质 The bottom end uses the spring as the buffer when the sample falls 底端采用弹簧作为样品下落时的缓冲。 Passable atmosphere protection be protected (according to the customer's own process requirements) and the liquid is not filled so that the sample will fall and then gradually out there will h***e a space buffer to prevent it from spilling into the corundum pipe. 使用过程中可通气氛保护(根据客户自身工艺要求）且液体不盛满这样样品落下来反渐出去有一个空间缓冲，防止其溅到刚玉管内。
|
|
Dimensi*** 尺寸 |
Furnace size: 850*600*1960mm(L*W*H ) 炉子尺寸： 850*600*1960mm(长*宽*高 ) |
|
Net Weight 净重 |
150kg |
|
Vacuum Flange 真空法兰 |
With water-cooled flange, the upper flange can manually control clamping the sample and releasing the sample (only reserve the interface of connecting the sample to the wire, do not provide the wire,） can realize the sample le***ing the thermal field quickly; The lower flange realizes the connection between the vacuum chamber and the storage tank through the electric plate valve. 采用水冷法兰，上端法兰可手动控制夹住样品和放开样品（只预留接样品挂丝的接口，不提供丝），可实现样品快速离开热场；下端法兰通过电动插板阀实现真空腔体与储液罐之前的连接。 |
|
Sample clamping and release implementation details 样品夹持以及放开实现细节 |
The upper end flange end cover is inserted into a ***all iron core by opening a ***all hole, the iron core and the flange end cover are extruded and sealed by sealing ring, and the upper end is fixed with the iron core through the split excitation electromagnet (the electric time division excitation electromagnet absorbs the iron core to ensure that it does not fall; The electromagnet withdraws the absorbing force and the sample falls under the action of gr***ity. 上端法兰端盖开一个小孔插入一根小铁芯，铁芯跟法兰端盖间通过密封圈挤压密封，上端通过分励电磁铁固定住铁芯（通电时分励电磁铁吸合铁芯保证不下落；断电时分励电磁铁撤出吸合力，样品在重力作用下下落） |
|
Vacuum Pressure 真空压力 |
133torr can be achieved by mechanical pump 机械泵可达133torr（1pa） 10^-6 torr can be reached by molecular pump 分子泵可达10^-6torr（10^-3pa） Please click the picture below to order vacuum pump 点击下列图片订购真空部件 |
|
Warranty 质保 |
One year limited warranty with lifetime support (Such c***umable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年质保终身支持（消耗品如炉管，石英管堵，O型圈等不在质保范围内） |
|
Warning 注意事项 |
***all cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。 |
|
Compliance 认证 |
CE Certified CE认证 The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost. 可付费进行TUV(UL61010)或CSA认证 |
|
Operation instructi*** 操作指导 |
Click to download the operating manual 点击***说明书 |