电磁铁 ZB-O1096A-12L 矿用电磁先导阀
尺寸：96*18.4
电压：DC12V
电阻：145欧姆
耐压：2000V/1min
材质说明： 1、衔铁：太钢DT4C电工纯铁
2、居里温度曲线退磁处理，无剩磁
3、铜基座H62铜，表面钝化处理防氧化
4、绝艳材料：特氟龙胶带，绝缘性能良好，符合环保要求
5、卡口采用进口不锈钢材质。
欢迎矿业电液支架生产客户咨询订购！
6、衔铁电镀采用化学镀镍，盐雾测试过72小时
7、漆包线采用德国进口***矿用优质漆包线，耐温等级210度以上，耐压4000V以上
工艺流程说明：
1、衔铁采用德国进口走心机一次成型，慢进刀无第二次矫顽力产生
2、初次粗加工预留3个丝退磁后精加工，精加工精度控制在0.5丝以内
3、所有产品在包好绝缘层之后进行耐压测试，合格后进行绕线
4、绕线机为进口扫描跟踪伺服电机控制，绕线层紧密平直，磁力线稳定
5、外包绝缘层采用环保黑色胶带缠绕，之后全检耐压
6、电阻、外形尺寸测量检测
Of electromagnet the SDL-K40039 Mine solenoid pilot valve
Size: 96 * 18.4
Voltage: DC12V
Resistance: 145 Ohm
Withstand voltage: 2000V/1min
Material Description: 1, the armature: TISCO DT4C, electrical iron
2, the Curie temperature curve demagnetization process, no remanence
3, copper dock H62 copper surface passivation oxidation
4, Jueyan materials: Teflon tape, good insulation properties, environmental compliance
5, bayonet imported stainless steel material.
Mining electro-hydraulic stent manufacturing customers are welcome to c***ult and order!
6, the armature plating electroless nickel, salt spray test 72 hours
Enameled wire with German imports of professional mine-quality enameled wire temperature rating of 210 degrees or more, the withstand voltage of 4000V
Process flow:
1, the armature imported from Germany, take the effort to a shape, the slow feed without second coercivity
Initial rough set aside three wire demagnetization after finishing, the finishing precision control 0.5 wire
3, all wrapped insulation layer pressure test, after passing the winding
4, winding machine imported scan tracking servo motor control, close flat winding layer, the stability of the magnetic field lines
5, outsourcing insulating layer is made of environmentally friendly black tape around after a full inspection withstand
6, resistance, overall dimensi*** detection
