PA6 CM1011G-15---PA6: fatigue strength, steel, heat resistance is lower than nylon 66, but it has good elasticity, good vibration elimination and noise reduction ability. white
Application: light load, medium temperature (80-100) no lubrication or less lubrication, low noise requirements under the conditi*** of wear-resistant stressed tran***ission parts.
Impact performance - unit system test method after drying and adjustment
Notched impact strength of simply supported beams ISO 179
-40°C 6.0 7.0 kJ/m² ISO 179
23°C 9.0 9.5 kJ/m² ISO 179
Notchless impact strength of simply supported beams ISO 179
-40°C 20 25 kJ/m² ISO 179
23°C 50 60 kJ/m² ISO 179
Unit system test methods for thermal performance, drying and conditioning
Hot deformation temperature (0.45 MPa, UN annealed) 210 - - C ISO 75-2 / b
Melting temperature: 225 - - C DSC
Linear coefficient of thermal expansion - flow 4.5e-5 -- cm / cm / ° C ISO 11359-2
Specific heat 1700 -- J / kg / ℃
The thermal conductivity is 0.31 -- w / M / K
Unit system test method for electrical performance after drying and adjustment
Volume resistivity: 1.0e + 15.1.0e + 12 ohms · cm IEC 60093
Dielectric strength: 20 -- kV / mm IEC 60243-1
Dielectric c***tant 4 IEC 60250
23°C, 50 Hz 4.50 -- IEC 60250
23°C, 1 kHz 4.30 -- IEC 60250
23°C, 1 MHz 3.70 -- IEC 60250
Dissipation factor 5 IEC 60250
23°C, 50 Hz 0.050 -- IEC 60250
23°C, 1 kHz 0.040 -- IEC 60250
23°C, 1 MHz 0.030 -- IEC 60250
Arc resistance 6 120 sec UL 746