| Specification |
| Model | PAU unit | |
| Type | PAU-300S | |
| Performance | Temperature setting range(篊) | 20 to 30(When compressor is off: 20 to 40) |
| Temperature control accuracy(g) | ?.5 | |
| Humidity setting range | - | |
| Humidity setting accuracy | - | |
| Cooling capacity(W) | 230/280 | |
| Humidification capacity | - | |
| Allowable ambient temperature(篊) | 20 to 35 | |
| Allowable ambient humidity(RH%) | 10 to 85(No condensation) | |
| Appearance | Weight(kg) | 29 |
| Outside dimensi***(mm) | H350譝350譊400 | |
| Blower duct joint diameter(mm) | ?5 | |
| Coating color | Unit: Ivory(JPMA: Y22-85B semi-gloss) Controller: Dark gray(JPMA: Y55-40B semi-gloss) |
|
| Electrical characteristics |
Power supply | 1 phase 100V 50/60Hz |
| Operating current | 8.2/8.0 | |
| Power c***umption | 820/850 | |
| Components | Compressor | Rolling piston rotating type |
| Coolant, Coolant volume(g) | HFC-134a 120 | |
| Condenser, Cooler | Fin and tube | |
| Heater | Sheathed heater with fin(600W) | |
| Humidifier | - | |
| Blower air discharge rate | 0.8/1.0 (*at connection duct 0.4/0.7 or higher) |
|
| 2.4/2.7? | ||
| Coolant controller | Capillary tube | |
| Temperature sensor | Thermocouple(Type K) | |
| Humidity sensor | - | |
| Temperature controller | Electronic digital setting indicating PID control | |
| Humidity controller | - | |
| Note: Temperature setting range: These values are obtained at the air discharge port of the PAU unit in a surrounding environment of 25篊/40% RH. The PAU unit may not offer the rated temperature control accuracy depending on the ambient temperature/humidity. Blower air discharge rate: Make sure that you do not excessively reduce the volume of the evolving airflow to prevent freezing. (For more information, please contact our sales representative.) Cooling capacity: These values are obtained in a surrounding environment of 25篊/40% RH. Allowable ambient temperature: Performance does not cover all temperature control ranges. |