PA6 K225-KS荷兰D***---K225-ks is a polyamide 6 (nylon 6) material,. The product is available in North America, Europe or Asia Pacific,.
The main characteristics of akulon? K225-ks are as follows:
Flame retardant / rated flame
Flame Retardant
heat stabilizer
Halogen-free
Unit system test method for physical properties after drying and adjustment
Density: 1.18 -- g / cm? ISO 1183
Shrinkage: ISO 294-4
Vertical flow direction 0.91 --% ISO 294-4
Flow direction 1.1 --% ISO 294-4
Water absorption ISO 62
Saturated, 23 ° C 9.0 --% ISO 62
Balanced, 23 ° C, 50% RH 2.5 --% ISO 62
Mechanical properties - unit system test method after drying and adjustment
Tensile modulus 3800 1400 MPa ISO 527-2
Tensile stress (yield) 80.0-40.0 MPa ISO 527-2
Tensile strain (yield) 3.5 22% ISO 527-2
Nominal tensile breaking strain 8.0 > 50% ISO 527-2
Impact performance - unit system test method after drying and adjustment
Notched impact strength of simply supported beams ISO 179 / 1ea
-30°C 5.0 5.0 kJ/m² ISO 179/1eA
23°C 6.0 10 kJ/m² ISO 179/1eA
Notchless impact strength of simply supported beams ISO 179 / 1eu
-30°C 55 -- kJ/m² ISO 179/1eU
23°C 60 -- kJ/m² ISO 179/1eU
Unit system test methods for thermal performance, drying and conditioning
Hot deformation temperature
0.45 MPa, UN annealed 180 - - C ISO 75-2 / b
1.8 MPa, UN annealed at 75.0-- ° C ISO 75-2 / A
Melting temperature: 1 220 - - C ISO 11357-3
Linear coefficient of thermal expansion ISO 11359-2
Flow 9.0e-5 -- cm / cm / ° C ISO 11359-2
Transverse 9.0e-5 -- cm / cm / ° C ISO 11359-2
Unit system test method for electrical performance after drying and adjustment
Surface resistivity - 1.0e + 14 ohms IEC 60093
Volume resistivity > 1.0e + 15.1.0e + 13 ohms · cm IEC 60093
Dielectric strength: 30.25 kV / mm IEC 60243-1
Relative permittivity IEC 60250
100 Hz 3.30 8.00 IEC 60250
1 MHz 3.20 3.60 IEC 60250
Dissipation factor IEC 60250
100 Hz 9.0E-3 0.13 IEC 60250
1 MHz 0.020 0.080 IEC 60250
Leakage tracking index 600 600 600 V IEC 60112
Unit system test method for flammability, drying and adjustment
Flammability class - IEC 60695-11-10, - 20
0.380 mm V-0 -- IEC 60695-11-10, -20
1.50 mm V-0 -- IEC 60695-11-10, -20
Flammability index of glow wire IEC 60695-2-12
0.380 mm 960 -- °C IEC 60695-2-12
1.50 mm 960 -- °C IEC 60695-2-12
Hot filament ignition temperature IEC 60695-2-13
0.380 mm 960 -- °C IEC 60695-2-13
1.50 mm 960 -- °C IEC 60695-2-13