原装进口呼吸空气充填泵

LSPE200-TE-H STANDARD

High Pressure Industrial Compressor Unit

呼吸空气充填泵

流量200 L/min

排气压力330 bar 可调

风冷，无需安装基础, 标准型设计.

Application:

用途

LSPE200-TE-H是专为持续运行而设计的高质量呼吸空气充填泵. LSPE200-TE-H性能可靠, 操作简单, 维护方便, 广泛应用于消防,救生, 潜水呼吸, 可常年提供满足国际呼吸空气标准“EN 12021“的高品质呼吸空气.

THE LSPE200-TE-H COMPACT  IS DESIGNED FOR CONTINUOUS DUTY.  YOU WILL FIND THE LSPE200-TE-H  IS A HIGH QUALITY, RELIABLE, ECONOMICAL TO USE, EASY TO MAINTANCE , DEPENDABLE COMPRESSOR THAT IS IDEAL FOR  SCUBA &SCBA . AND GIVE YEARS OF HIGH QUALITY BREATHING AIR MEET GRADE “EN12021“.

优点

Advantages

W型，3缸3级单动作活塞式压缩，***高排气压力为330Bar。***活塞平衡，单件连杆设计。大排量，低转速，风冷无基础设计，多重V带驱动，飞溅润滑。装备齐全，为工业用户之理想选择。

" LSCOMP " LSCOMPRESSOR, LSPE200-TE-H MOD., reciprocating, stationary, in "W" frame arrangement, balanced, single-acting, THREE STAGE compressor for Air up to330 bar., Large capacity, slow running, air - cooled, WITH CYLINDERS LUBRICATION, stationary unit, fully equipped. Ideal for Industrial applicati***.

压缩机为整体撬装式结构，此种结构来源于油田应用，经不断改良而适合于呼吸空气充填泵的要求。压缩机采用风冷气缸，高压缩比，***率。压缩机经平衡设计，振动小，不需要特别的基础，在某些场合，甚至可以在高密度橡胶衬垫上运行。

The compressor is a trunk piston style compressor. It is derived from a proven oil field compressor frame that has been modified for the demands of high-pressure compression. The frame is then equipped with air-cooled cylinders, permitting higher compression ratios and better efficiency. The compressor is balanced so that, in most cases, the compressor can be run on a high-density rubber pad, and does not require a special foundation.

机组配有多重保护功能，包含排气温度高停机，低油压停机，末级排气压力高停机。

Critical shutdowns include a high discharge gas temperature switch,  low oil pressure switch,  and a high discharge gas pressure switch (final stage).

压缩机每级出口配有风冷冷却器（另有水冷冷却器作为选购件可供选择），安全阀，气水分离器，自动排污阀。所有内部管路和连接均出厂前安装完毕，方便现场安装。

Additional equipment include an air cooled heat exchanger after each stage of compression (water cooled heat exchangers ***ailable as an option), pressure safety valves after each stage of compression, all internal skid piping, personnel gua*** over rotating components, a separator after each stage of compression, and an automatic  condensate drain system.

可靠的性能:由于采用了可靠的设计和耐腐蚀的过滤器和冷却器, 适用于连续运行的场合

Dependable Performance: suited for continuous operation, due to their rugged design and corrosion resistant intermediate filter and cooler assemblies.

***的设计: 驱动部分的运动部件和连杆均经过***平衡, 因此机组的震动***, 连杆的负荷平衡. 级间冷却器, 翅片式后冷却器, 翅片式气缸,翅片式铝制缸头, 带有风扇的飞轮,均保证极低的运行和排气温度.
State-of-the-Art Design: balanced moving parts in the drive gear and connecting rods allows for low vibration and balanced rod loads. Interstage coolers, finned after cooler, finned cylinders, finned aluminum heads, and fan-bladed flywheel produce cooler operating and discLSErge temperatures.

***的材质: 铸铁的气缸确保长寿命, 采用具有延展性铁制材料制成的平衡曲轴,带有大直径平衡块确保低轴承负荷,高强度并增加了机组寿命.铝制缸头提供***的散热.7075-T6铝合金连杆提供高强度. 铝制曲轴箱消除了不必要的重量.

Top Graded Materials: cast iron cylinders for long life; ductile iron counterbalanced cranksLSEft with large diameter throw for low bearing loads, high strength and increased life; aluminum cylinder heads for superior heat dissipation; 7075-T6 aluminum connecting rods for high strength; and aluminum crankcase for elimination unnecessary weight.

高质量部件:低摩擦轴承提供平滑的运行并降低功耗. 前后轴承提供***的曲轴对中,延长曲轴寿命. 全封闭风扇防护罩. 飞轮经过***平衡并带有风扇叶片,提供***的冷却能力. 重载型曲轴驱动齿轮式油泵为磨损区域提供充足的润滑.不锈钢阀片耐磨损, 散热性好. 阀座采用镀镍处理,耐腐蚀.

High Quality Components: anti-friction bearings for ***ooth operation with lower horsepower; front and rear bearings for precise cranksLSEft alignment and long sLSEft life; fully enclosed, all metal fan-blade guard; fly wheel precision-balanced and fan-bladed for excellent cooling capacity; he***y duty, sLSEft-driven, gear-type oil pump for generous lubrication to critical wear areas for longer pump life; stainless steel, disc-in-plate valves for long wear and excellent heat resistance and dissipation; valve housings nickel-plated for corrosion resistance.

机组供货范围 Scope of supply

风冷，单动作，三级压缩三缸压缩机主体。

Three-CYLINDER COMPRESSOR, air cooled, single effect, three-stage compression.

可拆卸式进气消声过滤器，10微米精度 

Intake removable filter, with silencer.

常规惯性飞轮，V带驱动

Normal inertia flywheel, for V belts tran***ission.

V型皮带及皮带防护罩

V belt and belt enclosure

专用冷却风扇

Cooling fan

飞溅润滑系统

flash lubritation system

轻合金活塞

Light alloy pist***

铝制汽缸头，***阀座

Aluminium cylinder heads, with individual valve pockets.

全自动环形阀和活塞环，大流量，多动作，***率

Automatic valves, big flow area, operating much below their nominal cLSracteristics.

风冷不锈钢中间冷却器

AIR-COOLED stainless steel intercoolers between stages

风冷后冷却器带安全阀

AIR-COOLED stainless steel aftercooler, furnished with safety valve.

二,三级水气分离器

air/coolant separators after the second stage cooler and after cooler

3KW 380V/3/50, IP54电机

3KW, 380V/3/50 IP54 motor

钢制机组标准型防护罩

Steel cabinet enclosure

防震脚垫

Vibration isolation

机组润滑合成油

Lubrication oil

技术参数 Performance

<