TESA Micro Hite 具有自成一体的设计理念, 非常适合于一维和两维的几何坐标测量 – 内外长度, 高度,深度,阶梯尺寸和距离.
自动搜索***高和***低点的功能及其对***大***小值及其差值的记忆能力使之成为圆形尺寸的测量有效工具.
外加TESA 1G-13(选加附件)则更能按照ISO1101标准测量垂直度, 直线度, 平行度和端跳.
此测高仪安装在镀镍的坚固底座上, 底座上配有三个精密抛光支承, 气浮可使测高仪在测量平台上轻松移动.
金属光栅尺带有零位参考点, 测量头安装在滚珠轴承上, 驱动系统可锁定并进行微调(需选加附件).
计算机误差补偿更提高了长度,直线度和垂直度的测量精度.
TESA Micro Hite is a self-contained design made to measure in 1 or 2 coordinate directi*** – For length measurements in the form of internal, external, height, depth, step and distance dimensi*** of geometric elements with flat, parallel or cylindrical surface.
Automatic capture of the culminating point on bores and shafts – Memory functi*** <max.>, <min.> and <max.-min.> in dynamic probing.
TESA 1G-13 digital probe, as an option, lets you also measure any deviation from perpendicularity, straightness and paralleli*** as well as runout errors with result output in conformance with ISO1101.
The instrument is mounted on a rugged nickel plated base with bottom face including three supporting points finely lapped. Air cushion usable for easy move of the height gauge accross the surface plate.
Incremental glass scale with reference point. Measuring head mounted on a ball-bearing. Drive system can be locked or tighten. Fine adjust can also be additionally mounted(***ailable as an option).
Extremely accurate measuring of deviati*** from length, straightness and perpendicularity due to the automatic correction of the bias errors through CAA(Computer Aided Accuracy).
1. 技术指标 Performance Specificati***
Model/ 型号规格
|
TESA MICRO-Hite
|
|||
350
|
600
|
900
|
||
测量范围/ Measuring span
|
mm
|
365
|
615
|
920
|
应用范围/ Application range
配标准附件/ With standard accessory
配订货号00760057的测头座/ With probe insert holder No. 00760057
配订货号S07001622的测头座/ With probe insert holder No. S07001622
|
mm
|
520
575
745
|
770
825
995
|
1075
1130
1300
|
***大允许误差(带标准附件)/ Max. permissible error, with standard accessory
|
(2+3L)μm,
(L单位为米/L in m)
|
|||
重复性(带标准附件)/ Repeatability, with standard accessory
|
&plu***n;2s≤2μm
|
|||
运动速度/Displacement speed
|
300 mm/s
|
|||
测量力/Measuring force
|
1.6N
|
|||
机械垂直度/ Mechanical Perpendicularity
|
μm
|
<7
|
<9
|
<11
|
主机重量/ Net weights, without panel and battery pack
|
kg
|
33
|
38
|
45
|
可充电电池使用时间/ Life time of the rechargeable battery
|
12小时/ 12 hours
|
2. 环境要求Required Specification
- 存储温度范围: -10℃ ~ 60℃
- 工作温度: 10℃ ~ 40℃
- 相对湿度: 80%
- 工作电压: 可充电电池6伏,3安培或110 ~ 240伏, 50 ~ 60赫兹交流电压输入
|
- Storage temperature range: -10℃ to 60℃
- Operating temperature range: 10℃ to 40℃
- Relative humidity: 80%, noncondensing
- Power supply: Rechargeable battery pack, 6V,3Ah or 110 to 240 Vac , 50 to 60 Hz
|
3. TESA《POWER PANEL》控制面板测量功能/ TESA Control Panel 《POWER PANEL》Function of Control Panel
1) 主要特点/ Key Features:
内置一维和两维几何测量程序, 可完成各种常用几何量测量, 也提供垂直度,直线度测量的可能性. 提供99个测量程序可完成64种几何特征的测量. 可存储2500个测量数据. 具有数据统计功能, 测量结果可通过内藏打印机或外接A4打印机输出, PCMCIA记忆卡可存储测量程序和数据以便重复使用. 操作者可对屏幕显示进行多种控制和选择.
With dedicated program for measuring in 1 and 2 coordinate direction with geometri combination of the measured values. Lets you also measure perpendicularity, straightness and squareness. Provides 99 workpiece oriented measurement cycle including 64 features with related limits of size, programmable. Memory capacity for 2500 measured values. Statistical value processing(SPC). Result output via the built-in matrix printer or in A4 format using an external unit. PCMCIA memory card reader enabling measurement cycles and result to be stored. Operator-controlled on-screen display.
2) 主要测量功能/ Main Measuring function
主要测量功能
Definition of display symbols
|
描述
Description
|
不考虑测头直径时的测量
Measurements without taking a gauge head c***tant into account
|
|
考虑测头直径时的测量
Measurement taking a gauge head c***tant into account
|
|
“连续性显示”测量模式
“Continuous Display” measuring mode
|
|
上两次测量的差值
Difference of the last two probing
|
|
上两次测量值的差值
Difference between the last two measured values
|
|
选择两次触测
Select double probing
|
|
选择单次触测
Select single probing
|
|
取消A和B基准
Cancellation of reference A and B
|
|
予置功能
“PRESET” function
|
|
将显示的数值传给内藏打印机或外设
Transfer the value on the main display to the internal printer or to a peripheral
|
|
在仪器存储器中存储数据
Confirm the data in the instrument memory
|
|
计量单位选择
Choice of unit selection and number of decimals after the decimal point
|
|
取消测量结果
Cancellation of the measuring results
|