Araldite® 2014-1

Araldite® 2014-1 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good
environmental and excellent chemical resistance.
Used for bonding of metals, electronic components, GRP structures and many other items where a higher than
normal temperature or more aggressive environment is to be encountered in service. The low out gassing makes this
product suitable for spe***t electronic telecommunication and aerospace applicati***.
Application of adhesive
The resin/hardener mix may be applied manually or robotically to the pretreated and dry joint surfaces. Hunt***an's
technical support group can assist the user in the selection of an suitable application method as well as suggest a
variety of reputable companies that manufacture and service adhesive dispensing equipment.
A layer of adhesive 0.05 to 0.10 mm thick will normally impart the greatest lap shear strength to the joint. Hunt***an
stresses that proper adhesive joint design is also critical for a durable bond. The joint components should be
assembled and secured in a fixed position as soon as the adhesive has been applied.
For more detailed explanati*** regarding surface preparation and pretreatment, adhesive joint design, and the dual
syringe dispensing system, visit .
Equipment maintenance
All tools should be cleaned with hot water and soap before adhesives residues h***e had time to cure. The removal of
cured residues is a difficult and time-c***uming operation.
If solvents such as acetone are used for cleaning, operatives should take the appropriate precauti*** and, in addition,
***oid skin and eye contact.
Times