| ENAC-AlSi10Mg(a) ( ENAC-43000 ) | |||||||||||
| Grade : | ENAC-AlSi10Mg(a) | ||||||||||
| Number: | ENAC-43000 | ||||||||||
| Classification: | Aluminium alloy for casting | ||||||||||
| Standard: | EN 1706: 2010 Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties | ||||||||||
| Chemical composition % of grade ENAC-AlSi10Mg(a) ( ENAC-43000 ) | |||||||||||
| Fe | Si | Mn | Ni | Ti | Cu | Pb | Mg | Zn | Sn | Others | - |
| max 0.55 | 9月11日 | max 0.45 | max 0.05 | max 0.15 | max 0.05 | max 0.05 | 0.2 - 0.45 | max 0.1 | max 0.05 | each 0.05; total 0.15 | Al - remainder |
| Mechanical properties of grade ENAC-AlSi10Mg(a) ( ENAC-43000 ) | |||||||||||
| Rm - Tensile strength (MPa) (F) (S) | 150 | ||||||||||
| Rm - Tensile strength (MPa) (T6) (S) | 220 | ||||||||||
| Rm - Tensile strength (MPa) (F) (K) | 180 | ||||||||||
| Rm - Tensile strength (MPa) (T6) (K) | 260 | ||||||||||
| Rm - Tensile strength (MPa) (T64) (K) | 240 | ||||||||||
| Rp0.2 0.2% proof strength (MPa) (F) (S) | 80 | ||||||||||
| Rp0.2 0.2% proof strength (MPa) (T6) (S) | 180 | ||||||||||
| Rp0.2 0.2% proof strength (MPa) (F) (K) | 90 | ||||||||||
| rp0.2 0.2% 证明强度 (mpa) (t6) (k) | 220 | ||||||||||
| rp0.2 0.2% 证明强度 (mpa) (t64) (k) | 200人 | ||||||||||
| a-***小伸长率 (%)(f) (s) | 2 | ||||||||||
| a-***小伸长率 (%)(t6)(s) | 1 | ||||||||||
| a-***小伸长率 (%)(f) (k) | 2。5 | ||||||||||
| a-***小伸长率 (%)(t6)(k) | 1 | ||||||||||
| a-***小伸长率 (%)(t64)(k) | 2 | ||||||||||
| 布氏硬度 (hbw): (f) (s) | 50 | ||||||||||
| 布氏硬度 (hbw): (t6) (s) | 75 | ||||||||||
| 布氏硬度 (hbw): (f) (k) | 55 | ||||||||||
| 布氏硬度 (hbw): (t6) (k) | 90 | ||||||||||
| 布氏硬度 (hbw): (t64) (k) | 80 |
东莞市协昌金属材料有限公司
普通会员第10年
|
公司主营：模具钢，铜合金，不锈钢，铝合金，镁合金，钛合金，钢板等。