孔铜测厚仪 面铜测厚仪 孔内铜厚测量仪 表面铜厚测量仪 表面铜测厚仪 孔壁测厚仪;俄罗斯intron生产的PTH-1/ITM-52 孔内镀铜测试仪
线路板PTH孔壁銅厚及敷銅板铜箔厚度測試儀
手提式PTH-1
生产过程中能及時***現瑕疵是很重要的,所以我們研制了PTH-1這台手提式測厚儀,用于测量线路板孔內鍍銅 (PTH) 厚度,同时也能測量敷銅板的铜箔厚度。我們的手提式PTH-1能够快速,方便地给你答案!
PTH-1規格
原理技術:
渦流式
***大可測量板:
不限
***薄可測量板:
1.0mm (40 mil)
***厚可測量板:
2.4mm (96 mil)
探針插入方法:
手動 (或用探針座)
自動板厚度和孔径辨別:
不需要
***小能測量孔:
Æ 0.4mm (16 mil) *
***大能測量孔:
Æ 1.5mm (60 mil) *
孔壁Cu厚度測量範圍:
2.5 - 100um (0.1 - 4 mil)
适合測量的孔徑範圍:
EP-30探針
0.8 - 2.0mm (32 - 80 mil)
EP-25探針
0.6 - 0.8mm (24 - 32 mil)
EP-20探針 **
0.45 - 0.6 mm (18 - 24 mil)
敷銅板铜箔厚度測量範圍:
SP-100探*** **
15 - 100um (0.6 - 4.0 mil)
* 量度少於30mils或大於60mils時,需要使用特別之校正方法。
** 此為選件,須另外購買
一種快捷和容易的測試方法
- ***論已刻蝕和未刻蝕之板材均可很快地測量出孔內鍍銅厚度。
- ***能测量更细的孔(0.45-0.6mm)。
- 可測量敷銅板铜箔厚度,一***兩用。
- 高解度之LCD顯示,坚固耐用之鍵盤。
- 可充******池及交流連接器 (200V) 。
- 表面鍍鈦的探針可進行濕板测量,不會腐蝕探針。
- ******利以渦流式設計,相比其他測厚儀能更少地受銅表面或蝕刻墊的影響。
- 內建功能包括:標準統計功能,長方條表示的統計圖和索引功能。
- 可儲存高至15,000个測量數據,及通过RS-232C下載(需配合软件)。
*PTH-1基本型,包括以下配件
主***、EP-30探針、EP-25探針、相***配件
*PTH-1D豪華型,包括以下配件
主***、EP-30探針、EP-25探針、EP-20探針、SP-100探***、相***配件
EP-20 PTH孔壁厚度測量探針
SP-100敷銅板測量探***
PCB Through Hole Copper Thickness Gauge INTROMET ITM-52
The hand-held gauge ITM-52 is the enhanced successor to the INTROMET ITM-11, ITM-12 and ITM-51. The model ITM-51 is well-known gage worldwide under trade mark C***iderm CDE-5100 being sold in quantity in 1990-th.
INTROMET ITM-52 is designed for fast, precise, non-destructive measurement of copper thickness in plated through-holes (TH) of printed-circuit boa*** (PCB) and measurement of copper laminate of un-etched PCB.
This gauge is used for in-process control to maintain high-quality PCB production.
Principle of operation
The gauge utilizes eddy-current principle when measuring copper thickness in plated TH and four-point electrical resistance principle to measure copper laminate thickness on PCB surface.
-
Features
-
-
measures ***aller through-holes than any other competing instrument measures not only in holes, but also on the surface applicable for single, double and multilayer PCB measures copper thickness even under SnPb alloy coating measures wet boa*** only one-side access to the board is necessary calibrated with NIST traceable standa*** customer master calibration is ***ailable automatic zeroing instant precise readings
The INTROMET ITM-52 c***ists of a basic unit offering a variety of probe sizes.
The ITM-52 basic unit is adjustable for thickness of PCB, electrical conductivity, measuring units (metric or imperial), high and low limits, local time and alarm. It stores up to 15,000 readings and has IR-port downloading capabilities. Built-in functi*** include number of readings taken, min/max readings, mean value, standard deviation, range, Cp, Cpk, histogram. It is battery powered and equipped with an internal charger.
-
Delivery set includes the following items:
-
-
ITM-52 basic unit EP-20 probe Cartridge holder EP-25 cartridge EP-30 cartridge Reference standard RS-52-1 for the EP-30 Reference standard RS-52-2 for the EP-25 Calibration unit for EP-25/EP-30 Reference standard/calibration unit RS-52-3 for the EP-20 Hand-held probe guide SP-100 probe SP-100 calibration foils AC adapter IR-port adapter Operating Manual Plastic storage case
Probes EP-25S and EP-30S may be delivered optionally.
Features of measured PCB
PCB thickness range 0,5 - 6 mm (0,02 - 0,24 in ) Hole diameter range 0,45 - 2 mm (0,02 - 0,08 in) Measuring range in the hole 5 - 60 µm (0,2 - 2,4 mils) Measuring range on copper laminate 15 - 80 µm (0,6 - 3,2 mils) Largest measured board Unlimited Access to PCB One side
Probes and cartridges
Eddy-current probes for through holes are detachable, c***isting of a probe holder with replaceable EP-25 and EP-30 plug-in cartridges. The EP-20 probe is not detachable. Probe sensing tips (US Pat. 5,600,240) are inserted into through-holes to take readings. Due to special c***truction of probe tips, cracks in the copper may be detected. Probe tips are protected with special material to provide measurements in wet holes. Measurements are possible on etched or un-etched PCBs.
The SP-100 probe is intended for measuring thickness of copper laminate and uses a four-point electrical resistance measuring principle.
Eddy-current detachable probe and replaceable cartridges.
Eddy-current probes EP-25S and EP-30S h***e shortened dimension in order to increase fastness to shear load on the tip during measurement.
Surface probe SP-100 is designed for measuring copper laminate thickness on PCB surface. This probe realizes four-point electrical resistance principle of operation.
Probe SpecificationType of probe / cartridge Diameters of TH, mm (in) Size, mm (in) EP-20 probe 0,45 - 0,55 (0,017 - 0,022) Ø14 x 100 (Ø0,55 x 4) EP-25 probe as an assembly
(cartridge EP-25 plugged-in to cartridge holder) 0,6 - 0,8 (0,024 - 0,031) Ø10 x 125 (Ø0,4 x 4) EP-30 probe as an assembly
(cartridge EP-30 plugged-in to cartridge holder) 0,8 - 2,4 (0,031 - 0,09) Ø10 x 125 (Ø0,4 x 4) EP-25S (shortened probe) 0,6 - 0,8 (0,024 - 0,031) Ø10 x 90 (Ø0,4 x 3,5) EP-30S (shortened probe) 0,8 - 2,4 (0,031 - 0,09) Ø10 x 90 (Ø0,4 x 3,5) Cartridge EP-25 0,6 - 0,8 (0,024 - 0,031) Ø10 x 60 (Ø0,4 x 2,4) Cartridge EP-30 0,8 - 2,4 (0,031 - 0,09) Ø10 x 60 (Ø0,4 x 2,4) SP-100 --- 37 x 19 x 80 (1,5 x 0,7 x 3)