***供应USB-ML-MON08 仿真器

USB-ML-MON08
P&E USB MON08 Multilink Cable for the 68HC08 MON08

P&E USB Multilink MON08交互式转换接口(USB)

支持Freescale 68HC08

计算机USB接口( Windows 98SE/2000/XP/2003 )

计算机USB供电

通过MON08向目标板提供2V，3V和5V 125mA电源

目标板频率1MHz-8MHz

对一些HC08 设备自动判断频率+全兼容能力

自动判断HC08设备的频率

随机软件：PKG08SZ

P&E’s USB MON08 MULTILINK (Part# USB-ML-MON08) is a debug interface which allows a PC access to the monitor mode on Freescale HC08 microcontrollers. It connects between a USB port on a Windows machine and the standard 16-pin “Berg” debug connector on the target.

By using the USB MON08 MULTILINK, the user can take advantage of the monitor mode to halt normal processor execution and use a PC to control the processor. The user can then directly control the target’s execution, read/write registers and memory values, debug code on the processor, and program internal or external FLASH memory devices.

The USB MON08 MULTILINK works with P&E Microcomputer System's in-circuit debugger and flash programmer to allow debug and flash programming of the target processor. P&E has a set of interface libraries allowing the user to write their own Windows based application which interacts with P&E's debug interface.

NOTE: The Multilink cable is only recommended for development. For production usage, see the Cyclone Pro stand alone programmer and debug interface.

FEATURES:

• USB interface from PC to Multilink allows for fast, easy programming and debugging -- with the ease and compatibility of the USB interface.
• Compatible with HC08 family of microcontrollers.
• Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).
• Target Voltage: 2,3,5V driven to target, up to 125mA.
• Target Frequency: 1MHz-8MHz
• Can optionally drive a clock to the target
• Auto-frequency detection + trimming capabilities for some HC08 devices.
• Auto-frequency detection for HC08 devices.
• P&E's PKG08SZ GUI proramming and debugging software can be downloaded at No Charge
• For scripted programming, CPROG08SZ command-line programming software is ***ailable for purchase.
• Includes USB cable, Type A Male to Type B Male, 6-ft.

深圳军盛微芯电子科技有限公司