CY8CKIT-030 PSoC3 Development Kit

The CY8CKIT-030 PSoC® 3 Development Kit enables you to evaluate, develop and prototype high precision analog, low-power and low-voltage applicati*** powered by Cypress’s CY8C38 high precision analog device family.

Additionally, this kit supports the PSOC Expansion Board Kit ecosystem as a compatible host platform. This kit is for PSoC 3 development specifically, and the PSoC 5 version of the same kit can be purchased from /go/cy8ckit-050.

This kit is specifically designed for analog performance. The noise floor on these kits is very low. Care has been taken to separate the analog and the digital domain, separate regulators are also ***ailable. Separate ground planes are provided. We h***e achieved ENOB very close to 20 bits on this kit. Provision has been provided to add an external precision voltage reference if needed.

Besides the analog, this kit is also meant to dem***trate the low power operation of PSoC3/PSoC5. PSoC3 chip is soldered to the board, this way the leakage currents are reduced significantly compared to the CY8CKIT-001. Special terminals are provided to enable the boost converter operation without much modificati***. Jumpers h***e been provided to remove power to RS232 converter, Potentiometer and to h***e a single regulator for Analog and digital domain and evaluate the low power operation of PSoC3.

It has got an onboard programmer(Cypress USB chip based), which lets you program PSoC3/PSoC5 without connecting Miniprog3. Provision has been provided to program using Miniprog3 as well