Application
Workgroup Switch
With 16 100Mbps SFP ports and up to 2 Gigabit Ethernet Combo ports, the SWM1602FF-BA provides a cost-effective, high-performance solution for power users.
Department Switch
The SWM1602FF-BA can easily build a local, high bandwidth Fast Ethernet network for backbone of your department by performing 7.2Gigabits per second, non-blocking switch fabric. With the two built-in SFP ports, the SWM1602FF-BA provides the uplink to the backbone network through Gigabit Ethernet LX/SX SFP modules.
Key Features
Physical Port
• 16 x 100Base-FX Fast Ethernet ports
• 2 x 1000Base-X SFP slots, shared with Port-17 and Port-18
Layer 2 Features
• Auto-MDI/MDI-X detection on RJ-45 port（17、18 ports）
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x PAUSE frame flow control(full-duplex)
• High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Supports VLAN
–IEEE 802.1Q Tag-Based VLAN
–Port-Based VLAN
–MTU VLAN (Multi-Tenant Unit VLAN)
• Supports Spanning Tree Protocol
–STP, IEEE802.1D (Classic Spanning Tree Protocol)
–RSTP, IEEE802.1W (Rapid Spanning Tree Protocol)
–Loopback Detection
• Supports Link Aggregation
–up to 3 trunk groups
–up to 4 Fast Ethernet ports or 2 Gigabit ports per trunk group
–IEEE 802.3ad LACP (Link Aggregation Control Protocol)
–Cisco ether-channel (Static Trunk)
• Port Mirroring to monitor the incoming or outgoing traffic on a particular port
Quality of Service
• 2 priority queues on all Switch ports
• Traffic classification
–Port-Based priority
–IEEE 802.1p based priority
–IP TOS / DSCP based priority
–TCP / UDP Port-Based QoS
• Strict priority and Weighted Round Robin (WRR) CoS policies
• In/Out rate limit control on each port
• Broadcast Storm Control support
Multicast
• Supports IGMP Snooping v1 and v2
Security
• MAC address filter
• TCP & UDP filter on each port
• Management idle time security