台仪温控器|泛达温控表|台达温控仪
联系人：魏工 电话：15882174684
座机：028-84472033
***：2030149354
产品资料：
1 Thermocouple type of temperature
sensor
ON J
OFF K
2 Temperature unit
ON °F
OFF °C
3 NC
4 Input type selection for the third input
(Input 2)
ON Analog input
OFF Thermocouple
5 Input type selection for the fourth
input (Input 3)
ON Analog input
OFF Thermocouple
6 Analog input signal range
ON 1 to 5V/4 to 20mA
OFF 0 to 10V
Temperature input
Input type Range (°C) Range (°F)
K -200.0 to 1300.0 -300 to 2300
J -100.0 to 850.0 -100.0 to 1500
●Main Specificati***
* 1 Accuracy for a K-type sensor at -100°C or less is &plu***n;4°C &plu***n;1 digit max.
* 2 Accuracy for a K-type sensor at -100°C or less is &plu***n;10°C &plu***n;1 digit max.
DIP Switch Settings
The DIP switch is used to set the temperature unit and to set the temperature input range.
Note: Set the temperature range according to the type of temperature sensor connected to the Unit. Temperature data will not be converted
correctly if the temperature range does not match the sensor.
●CompoBus/S I/O Link Unit
Item CP1W-TS004
Temperature sensors Thermocouples
Switchable between K and J, but same type must be used for all inputs.
Number of inputs 12 (2 input wo*** and 1 output word allocated)
Accuracy
25°C (The larger of &plu***n;0.5% of converted value or &plu***n;2°C) &plu***n;1 digit max. *1
0 to 55°C (The larger of &plu***n;1% of converted value or &plu***n;4°C) &plu***n;1 digit max. *2
Conversion time 500 ms for 12 input points
Converted temperature data 16-bit binary data (4-digit hexadecimal)
2-decimal-place mode is not supported
Isolation Photocouplers between any two input signals
Current c***umption 5 VDC: 80 mA max., 24 VDC: 50 mA max.