***HONEYWELL温控器|山武AZBIL温控表|欧姆龙OMRON温控仪
联系人：魏工 电话：15882174684
座机：028-84472033
***：2030149354
产品资料：
External input
impedance
Analog voltage inputs 1MΩ min.
Analog inputs Approx. 250Ω
Open-circuit detection function Supported
***eraging function Unsupported
Conversion time 250 ms for 4 input points
Converted temperature data 16-bit binary data (4-digit hexadecimal)
Converted AD data 16-bit binary data (4-digit hexadecimal)
Isolation Photocouplers between all temperature and analog input signals
Current c***umption 5 VDC: 70 mA max., 24 VDC: 30 mA max.
SW Setting
1 Thermocouple type of temperature
sensor
ON J
OFF K
2 Temperature unit
ON °F
OFF °C
3 NC
4 Input type selection for the third
input (Input 2)
ON Analog input
OFF Thermocouple
5 Input type selection for the fourth
input (Input 3)
ON Analog input
OFF Thermocouple
6 Analog input signal range
ON 1 to 5V/4 to 20mA
OFF 0 to 10V
Temperature input
Input type Range (°C) Range (°F)
K -200.0 to 1300.0 -300 to 2300
J -100.0 to 850.0 -100.0 to 1500
pecificati***
*1 Accuracy for a K-type sensor at -100°C or less is &plu***n;4°C &plu***n;1 digit max.
*2 Accuracy for a K-type sensor at -100°C or less is &plu***n;10°C &plu***n;1 digit max.
DIP Switch Settings
The DIP switch is used to set the temperature unit and to set the temperature input range.
Note: Set the temperature range according to the type of temperature sensor connected to the Unit. Temperature data will not be converted correctly if the temperature
range does not match the sensor.
■CP1W-SRT21 CompoBus/S I/O Link Unit