型号：Stanyl46 HF5050 PA46-GF50 FR(17)
性能：50% 玻璃加固，热稳定，阻燃剂，高流动性，可电镀，润滑剂，注塑，脱模剂。
Stanyl PA46 物性需要完整物性联系我们：
| Physical |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Density
|
1.68
|
--
|
g/cm³
|
ISO 1183 |
|
Molding Shrinkage
|
ISO 294-4 | |||
|
Across Flow
|
0.40
|
--
|
%
|
|
|
Flow
|
1.1
|
--
|
%
|
|
|
Water Absorption (Equilibrium, 73°F, 50% RH)
|
1.6
|
--
|
%
|
ISO 62 |
| Mechanical |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Tensile Modulus
|
1.74E+6
|
1.09E+6
|
psi
|
ISO 527-2 |
|
Tensile Stress (Break)
|
24700
|
16000
|
psi
|
ISO 527-2 |
|
Tensile Strain (Break)
|
1.9
|
2.8
|
%
|
ISO 527-2 |
|
Flexural Modulus
|
1.60E+6
|
986000
|
psi
|
ISO 178 |
| Impact |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength
|
ISO 179/1eA | |||
|
-22°F
|
5.7
|
5.7
|
ft·lb/in²
|
|
|
73°F
|
6.2
|
6.2
|
ft·lb/in²
|
|
|
Charpy Unnotched Impact Strength (73°F)
|
19
|
19
|
ft·lb/in²
|
ISO 179/1eU |
| Thermal |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Heat Deflection Temperature (264 psi, Unannealed)
|
554
|
--
|
°F
|
ISO 75-2/A |
|
Melting Temperature 3
|
563
|
--
|
°F
|
ISO 11357-3 |
|
CLTE
|
ISO 11359-2 | |||
|
Flow
|
1.1E-5
|
--
|
in/in/°F
|
|
|
Transverse
|
2.5E-5
|
--
|
in/in/°F
|
| Electrical |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Volume Resistivity
|
> 1.0E+15
|
1.0E+10
|
ohms·cm
|
IEC 60093 |
|
Electric Strength
|
760
|
510
|
V/mil
|
IEC 60243-1 |
|
Comparative Tracking Index
|
225
|
--
|
V
|
IEC 60112 |
| Flammability |
Dry
|
Conditioned
|
Unit
|
Test Method
|
|
Flammability Classification
|
IEC 60695-11-10, -20 | |||
|
0.0138 in
|
V-0
|
--
|
|
|
|
0.0591 in
|
V-0
|
--
|
|
| Injection |
Dry
|
Unit
|
|
|
Drying Temperature
|
176
|
°F
|
|
|
Drying Time
|
4.0 to 8.0
|
hr
|
|
|
Rear Temperature
|
536 to 590
|
°F
|
|
|
Middle Temperature
|
572 to 599
|
°F
|
|
|
Front Temperature
|
572 to 599
|
°F
|
|
|
Nozzle Temperature
|
572 to 590
|
°F
|
|
|
Processing (Melt) Temp
|
590 to 608
|
°F
|
|
|
Mold Temperature
|
140 to 248
|
°F
|
|
|
Injection Rate
|
Moderate-Fast
|
|
|
|
Back Pressure
|
145
|
psi
|
|
|
Screw Compression Ratio
|
2.5:1.0
|
|
| Notes |
| 1These links provide you with access to supplier literature. We work hard to keep them up to date; however you may find the most current literature from the supplier. |
| 2A UL Yellow Card contains UL-verified flammability and electrical characteristics. UL Prospector continually works to link Yellow Cards to individual plastic materials in Prospector, however this list may not include all of the appropriate links. It is important that you verify the association between these Yellow Cards and the plastic material found in Prospector. For a complete listing of Yellow Cards, visit the UL Yellow Card Search. |
| 310°C/min |
Revision History
Added to Prospector: December, 2005
Last Updated: 2/23/2015
Added to Prospector: December, 2005
Last Updated: 2/23/2015
UL and the UL logo are trademarks of UL LLC © 2015. All Rights Reserved. UL Prospector
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.